ANTAIRA LMP-0800G-24 Manual de usuario

Antaira Technologies - Industrial Ethernet Switches

LMP-0800G-24 Series User Manual V1.0

LMP-0800G-24 Series

8-Port Industrial PoE+ Gigabit Managed Ethernet Switches

8*10/100/1000Tx (30W/Port); 12~36VDC Power Input (w/ Voltage Booster)

Version 1.0

User Manual

Antaira Technologies - Industrial Ethernet Switches

LMP-0800G-24 Series User Manual V1.0

This document contains information, which is protected by copyright. Reproduction, adaptation or translation

without prior permission is prohibited, except as allowed under the copyright laws.

Trademark Information

Antaira is a registered trademark of Antaira Technologies, LLC, Microsoft Windows and the Windows logo are the

trademarks of Microsoft Corp. NetWare is the registered trademark of Novell Inc. WMM and WPA are the

registered trademarks of Wi-Fi Alliance. All other brand and product names are trademarks or registered

trademarks of their respective owners.

translation without prior permission of Antaira Technologies, LLC is prohibited, except as allowed under the

Disclaimer

Antaira Technologies, LLC provides this manual without warranty of any kind, expressed or implied, including but

not limited to the implied warranties of merchantability and fitness for a particular purpose. Antaira Technologies,

LLC may make improvements and/or changes to the product and/or specifications of the product described in this

manual, without prior notice. Antaira Technologies, LLC will not be liable for any technical inaccuracies or

typographical errors found in this guide. Changes are periodically made to the information contained herein and

will be incorporated into later versions of the manual. The information contained is subject to change without prior

notice.

Antaira Technologies - Industrial Ethernet Switches

LMP-0800G-24 Series User Manual V1.0

iii

FCC Warning

This equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy. It may cause

harmful interference to radio communications if the equipment is not installed and used in accordance with the

instructions. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's

authority to operate the equipment.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Industrial Ethernet Switches

Industrial Grade Gigabit PoE Managed Ethernet Switches

User Manual

Version 1.0 (December 2015)

This manual supports the following models:

LMP-0800G-24

LMP-0800G-24-T

This document is the current official release manual. Please check our website (www.antaira.com) for any

updated manual or contact us by e-mail ([email protected]).

Antaira Technologies - Industrial Ethernet Switches

LMP-0800G-24 Series User Manual V1.0

Table of Contents

1. Introduction................................................................. 1

1.1 Product Overview 1

1.2 Product Software Features 1

1.3 Product Hardware Features 2

1.4 Package Contents 3

1.5 Safety Precaution 3

2. Hardware Description................................................. 4

2.1 Physical Dimensions 4

2.2 Front Panel 5

2.3 Top View 5

2.4 LED Indicators 5

2.5 Reset Button 6

2.6 Ethernet Ports 7

2.7 Cabling 8

2.8 Wiring the Power Inputs 8

2.9 Wiring the Fault Alarm Contact 9

3.Mounting Installation ................................................ 10

3.1 DIN-Rail Mounting 10

3.2 Wall Mounting 11

4.Hardware Installation................................................ 12

4.1 Installation Steps 12

5.Web Management...................................................... 13

5.1 Web Console Configuration 13

5.1.1 About Web-Based Management ............................13

5.2 Basic Setting 15

Antaira Technologies - Industrial Ethernet Switches

LMP-0800G-24 Series User Manual V1.0

5.2.1 System Information ................................................15

5.2.2 Admin & Password.................................................16

5.2.3 IP Setting................................................................16

5.2.4 IPv6 Neighbor Cache .............................................17

5.2.5 IPv6 Settings..........................................................18

5.2.6 System Time ..........................................................18

5.3 Port Management 19

5.3.1 Port Status..............................................................19

5.3.2 Port Configuration ..................................................19

5.4 PoE (Power-over-Ethernet) 20

5.4.1 PoE Configuration ..................................................20

5.4.2 Ping Alarm..............................................................21

5.4.3 PoE Schedule.........................................................21

5.5 ERPS 22

5.5.1 ERPS Status ..........................................................23

5.5.2 ERPS Configuration ...............................................24

5.5.3 Before Configuring ERPS.......................................26

5.6 Spanning Tree 34

5.6.1 RSTP Status...........................................................34

5.6.2 RSTP Configuration ...............................................35

5.6.3 MSTI Status............................................................37

Antaira Technologies - Industrial Ethernet Switches

LMP-0800G-24 Series User Manual V1.0

5.6.4 MSTI Configuration ................................................37

5.7 IGMP Snooping 40

5.7.1 IGMP Settings........................................................40

5.7.2 IGMP Snooping Status Table.................................41

5.8 802.1Q VLAN 41

5.8.1 802.1Q VLAN Settings ...........................................42

5.9 QoS (Traffic Prioritization) 43

5.9.1 QoS Classification..................................................44

5.9.2 CoS Mapping..........................................................45

5.9.3 ToS Mapping..........................................................45

5.10 Port Trunk 46

5.10.1 Trunk Status.........................................................47

5.10.2 Trunk Configuration..............................................47

5.11 Port Mirroring 48

5.12 SNMP 49

5.12.1 SNMP Agent.........................................................49

5.12.2 SNMP Trap Setting ..............................................51

5.13 DHCP Server / Rely 52

5.13.1DHCP Client .........................................................54

5.13.2 DHCP Server........................................................54

5.13.3 DHCP Server Binding...........................................55

5.13.4 DHCP Relay.........................................................56

Antaira Technologies - Industrial Ethernet Switches

LMP-0800G-24 Series User Manual V1.0

vii

5.14 802.1X 57

5.14.1 802.1X Settings....................................................57

5.14.2 Local Database ....................................................58

5.14.3 RADIUS Server ....................................................59

5.15 UPnP 60

5.15.1 UPnP....................................................................60

5.16 Modbus TCP 61

5.16.1 Enable Modbus TCP ............................................61

5.16.2 MODBUS Data Map and Information ...................62

5.17 System Warning 68

5.17.1 Syslog Setting ......................................................68

5.17.2 System Event Log ................................................69

5.17.3 SMTP Setting.......................................................69

5.17.4 Event Selection ....................................................70

5.17.5 Fault Alarm...........................................................71

5.18 MAC Table 71

5.18.1 MAC Address Table .............................................71

5.18.2 MAC Table Configuration.....................................72

5.19 Maintenance 72

5.19.1 Upgrade................................................................72

5.19.2 Reboot..................................................................73

5.19.3 Default..................................................................73

Antaira Technologies - Industrial Ethernet Switches

LMP-0800G-24 Series User Manual V1.0

viii

5.20 Configuration 73

5.20.1 Save.....................................................................74

5.20.2 Backup & Restore ................................................74

5.20.3 Auto Load & Backup.............................................75

5.21 Logout 75

6. Command Line Interface Management................... 76

6.1 About CLI Management 76

7. Technical Specifications.......................................... 95

Antaira Technologies - Industrial Ethernet Switches

LMP-0800G-24 Series User Manual V1.0

1. Introduction

All Antaira industrial managed switches come with a pre-installed “user-friendly” web console interface,

which allows users to easily configure and manage the units, whether one is using a serial console and

command line interface(CLI) commands like Telnet, SSH, HTTP (Web GUI) or simple network

management protocols (SNMP).

1.1 Product Overview

Antaira Technologies’LMP-0800G-24 series is an 8-port industrial Gigabit PoE+ managed Ethernet

switch embedded with 8*10/100/1000Tx Ethernet ports that support IEEE802.3at/af for a maximum of

30W/port. It is a fully manageable Layer 2 Ethernet switch that is pre-loaded with a user-friendly web

management console design. It supports the ring network redundancy function using the market’s open

standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol that has a <50ms network

recovery time. The advanced network filtering and security functions, such as, IGMP, VLAN, QoS,

SNMP, port lock, RMON, ModbusTCP, and 802.1X/HTTPS/SSH/SSL increase determinism and

improve network management for remote SCADA systems or control networks.

The LMP-0800G-24 series is IP30 rated and DIN-rail mountable. There are also two wide operating

temperature models for either a standard temperature range (STD: -10°C to 70°C) or an extended

temperature range (EOT: -40°C to 75°C). This series supports a dual power input having a low voltage

range (12~36VDC) and a built-in voltage booster allowing the unit to give a full 48VDC PoE power for

any mobile PoE application or any low voltage power sourcing environment. It also provides high EFT

and ESD protection for industrial networking applications, such as, power/utility, water wastewater,

oil/gas/mining, factory automation, security surveillance, ITS and any other outdoor or harsh

environment.

1.2 Product Software Features

Network Redundancy

STP, RSTP, MSTP, ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) for network

redundancy

Network Management

Web UI based management, SNMP v1/v2/v3, Serial Console

Qos, traffic classification QoS, Cos, bandwidth control for Ingress and Egress,

broadcast storm control, Diffserv

Antaira Technologies - Industrial Ethernet Switches

LMP-0800G-24 Series User Manual V1.0

IEEE802.1q VLAN tagging, port-based VLAN support

IGMP snooping v1/v2, IGMP filtering / throttling, IGMP query up to 256 group

Supports IPv4/IPv6, RMON, MIB II, port mirroring, event syslog, DNS, NTP/SNTP,

HTTPS, SSH/SSL, TFTP

MODBUS TCP for SCADA system integration

Port Configuration

Status, statistics, mirroring, rate limiting, event syslog

Event Handling

Event notification by Email: Cold/Warm Start, Power Failure, Authentication, SNMP

trap and Fault Alarm Relay Output

Software Upgrade via TFTP and HTTP

Configuration Backup –USB Port

1.3 Product Hardware Features

System Interface and Performance

All RJ-45 ports support Auto MDI Function

Embedded 8*10/100/1000Tx (PSE 30W/Port) RJ45 Ports

Store-and-forward switching architecture

8K MAC address table

Power line EFT protection: 2,000VDC; Ethernet ESD protection: 6,000VDC

Power Input

DC 12~36V redundant with a 6-pin removal terminal block

One user programmable alarm relay contact

Operating Temperature

Standard operating temperature models: -10°C to 70°C

Extended operating temperature models: -40°C to 75°C

Case/Installation

IP-30 protection metal housing

DIN-Rail and wall mount design

Tabla de contenidos

Otros manuales de Cambiar de ANTAIRA

ANTAIRA

ANTAIRA LNP-1204G-10G-SFP-24 Manual de usuario

ANTAIRA

ANTAIRA LNP-1002G-SFP Series Manual de usuario

ANTAIRA

ANTAIRA LNX-500AG Manual de usuario

ANTAIRA

ANTAIRA LNP-1204G-SFP Series Manual de usuario

ANTAIRA

ANTAIRA LMP-0601G-SFP Series Manual de usuario

ANTAIRA

ANTAIRA LNX-1600 Series Manual de usuario

ANTAIRA

ANTAIRA LMP-2012G-SFP Series Manual de usuario

ANTAIRA

ANTAIRA LNP-0800G-24 Series Manual de usuario

ANTAIRA

ANTAIRA LNX-0601G-SFP Manual de usuario

ANTAIRA

ANTAIRA LMX-0802-M Manual de usuario

ANTAIRA

ANTAIRA LNP-0500G-24 Series Manual de usuario

ANTAIRA

ANTAIRA LNX-800AG Manual de usuario

ANTAIRA

ANTAIRA LMX-1002G-10G-SFP Manual de usuario

ANTAIRA

ANTAIRA LNP-1802G-SFP Series Manual de usuario

ANTAIRA

ANTAIRA LMP-2012G-SFP Series Manual de usuario

ANTAIRA

ANTAIRA LNP-1002C-SFP-T Manual de usuario

ANTAIRA

ANTAIRA LNP-800AGH Series Manual de usuario

ANTAIRA

ANTAIRA LMX-1202G-SFP Series Manual de usuario

ANTAIRA

ANTAIRA LNX-0500-M12-67 Series Manual de usuario

ANTAIRA

ANTAIRA LMX-0501G-SFP-V2 Series Manual de usuario

ANTAIRA

ANTAIRA LNP-0702C-SFP Series Manual de usuario

ANTAIRA

ANTAIRA LMX-C602G-SFP-V2 Series Manual de usuario

ANTAIRA

ANTAIRA LMX-0802 Series Manual de usuario

ANTAIRA

ANTAIRA LNX-1802G-SFP Series Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario