Anritsu VectorStar ME7838E4 Manual de usuario

Quick Start Guide

VectorStar™ME7838E4

Multiport Broadband/Banded

Millimeter-Wave System

High Performance Modular Broadband/Banded Millimeter-Wave

Vector Network Analyzer (VNA) Multiport Measurement System

ME7838E4, 70 kHz to 110 GHz

Part Number: 10410-00771

Revision: B

Published: December 2019

Anritsu Company

490 Jarvis Drive

Morgan Hill, CA 95037-2809

USA

http://www.anritsu.com

1. ME7838E4 Main Components

QSG-2 PN: 10410-00771 Rev. B VectorStar ME7838E4 QSG

High Performance Modular Broadband/Banded Millimeter-Wave

Vector Network Analyzer (VNA) Measurement System, 70 kHz to 110 GHz

This guide provides quick setup instructions for the ME7838E4 Multiport Broadband/Banded mm-Wave VNA

System assembly. For additional safety and compliance information, and for more details about the assembly,

configuration, setup, and initial testing of the equipment, refer to the VectorStar™ ME7838x4 Series Multiport

Broadband Vector Network Analyzers Installation Guide – 10410-00734.

This and all other documentation that supports the ME7838E4 is available on the VectorStar product web

page:

http://www.anritsu.com/en-us/products-solutions/products/ms4640b-series.aspx

On this web page, you can select various tabs for more information about your instrument. Included is a

“Library” tab which contains links to all the latest technical documentation related to this instrument.

1. ME7838E4 Main Components

ME7838E4 Broadband Systems

The ME783A4 Multiport Broadband system consists of the following components:

•MS4647A or MS4647B VNA with Option 007 (Receiver Offset) and Option 08x (Modular Broadband

Connection Capability)

•MN4697C Multiport Test Set

•3736B Broadband Test Set

•3739C Broadband Test Set

•Four 3743E Millimeter-Wave Modules

•Front and rear panel cables

ME7838E4 Banded Systems

The ME7838E4 Multiport Banded system consists of the following components:

•MS464xA/B VNA with Option 08x

•MN4694C Multiport Test Set

•3736B Broadband Test Set

•3739C Broadband Test Set

•Four 3744E-EE, 3744E-EW, or four OML/VDI Millimeter-Wave Modules

•Front and rear panel cables

Caution

A MS464xA/B VNA unit is heavy. To avoid personal injury, it must be lifted and

maneuvered by at least two people during installation.

If mounting on a workbench surface, first position the 3739C Broadband Test Set

with access to its front and rear panels. Stack the remaining test sets on top of one

another, then finally the VNA.

If mounting into rack or console, make sure the Test Sets have been installed, and

that the rack/console is carefully positioned on a flat and level surface. If equipped,

make sure any casters are locked. Use two people to lift the VNA unit and two to

guide it into its shelf rails.

The test loops on the front and rear panels of the VNA are delicate. Be careful not to

bump or bend the test loops.

2. Rear Panel Connections Between System Components (MS464xA VNA)

VectorStar ME7838E4 QSG PN: 10410-00771 Rev. B QSG-3

2. Rear Panel Connections Between System Components

(MS464xA VNA)

In this section, connect the cables between the VNA and the Test Sets as shown in Figure 1 and Table 1.

Figure 1 ME7838E4 – Rear Panel Cable Connections (MS464xA VNA)

WARNING

No operator service-

able parts inside.

Refer servicing to

qualified personnel.

Ext

Alc

Out

Ext

Analog

a1ba2b2

IF Outputs

External I/O

~ LINE INPUT

47-63 Hz

85-240 VAC

150 VA Max

Fuse 250V 2A T

CAUTION

Do not operate with

power cord ungrounded.

CAUTION

For continued fire protection

replace only with specified

type and rated fuse.

Cable Length

Standard Extended

Module Interface

MN469xC

Test Set

3736B

Test Set

3739C

Test Set

MS464xA

VNA

11 15

1812

6666

7 7 7 7

2. Rear Panel Connections Between System Components (MS464xA VNA)

QSG-4 PN: 10410-00771 Rev. B VectorStar ME7838E4 QSG

Table 1. ME7838E4 Multiport Rear Panel Cable Connections (1 of 2)

Index Part Number Cable Description Connection From Connection To

1 3-806-225 BNC (male-male), 24 in MS464xA port labeled:

Ext Analog Out

3736B port labeled:

EXT ANALOG IN

2 3-806-225 BNC (male-male), 24 in MS464xA port labeled:

Ext ALC

3736B port labeled:

EXT ALC OUT

3 3-806-225 BNC (male-male), 24 in

3736B port labeled:

(To Test Set) EXT ANALOG

OUT

3739C port labeled:

EXT ANALOG IN

4 3-806-225 BNC (male-male), 24 in 3736B port labeled:

(To Test Set) EXT ALC IN

3739C port labeled:

EXT ALC OUT

73598-1a

(5 cable

bundle)

DB-25 3736B port labeled:

TO TEST SET EXTERNAL I/O

3739C port labeled:

EXTERNAL I/O

SMA male-male flexible:

3-72243-1

3-72243-2

3-72243-3

3-72243-4

3736B ports labeled:

(IF INPUTS)

3739C ports labeled:

(IF OUTPUTS)

73-80734a

(5 cable

bundle)

SMA male-male flexible:

3-72243-21

3-72243-22

3-72243-23

3-72243-24

MS464xA ports labeled:

(Inputs/Outputs)

a1 IF

b1 IF

a2 IF

b2 IF

3736B ports labeled:

(IF OUTPUTS)

a1 IF

b1 IF

a2 IF

b2 IF

8DB-25

MS464xA port labeled:

External I/O

3736B port labeled:

TO VNA EXTERNAL I/O

9 2100-1 GPIB, 1 m MS464xA port labeled:

Dedicated GPIB

MN469xC port labeled:

IEEE 488.2 GPIB

11 62112-81aSMA male-male

semi-rigid

MS464xA port labeled:

b2 loop out

MN469xC port labeled:

TO VNA b2 OUTPUT

12 62112-80aSMA male-male

semi-rigid

MS464xA port labeled:

b2 loop in

MN469xC port labeled:

TO VNA b2 INPUT

13 62112-81aSMA male-male

semi-rigid

MS464xA port labeled:

P2 source loop out

MN469xC port labeled:

TO VNA Port 2 Src OUTPUT

14 62112-80aSMA male-male

semi-rigid

MS464xA port labeled:

P2 source loop in

MN469xC port labeled:

TO VNA Port 2 Src INPUT

15 62112-81aSMA male-male

semi-rigid

MS464xA port labeled:

b1 loop out

MN469xC port labeled:

TO VNA b1 OUTPUT

16 62112-80aSMA male-male

semi-rigid

MS464xA port labeled:

b1 loop in

MN469xC port labeled:

TO VNA b1 INPUT

17 62112-81aSMA male-male

semi-rigid

MS464xA port labeled:

P1 source loop out

MN469xC port labeled:

TO VNA Port 1 Src OUTPUT

2. Rear Panel Connections Between System Components (MS464xA VNA)

VectorStar ME7838E4 QSG PN: 10410-00771 Rev. B QSG-5

18 62112-80aSMA male-male

semi-rigid

MS464xA port labeled:

P1 source loop in

MN469xC port labeled:

TO VNA Port 1 Src INPUT

19 MS464xA VNA

20 MN469xC Test Set

21 3736B Test Set

22 3739C Test Set

a. Tighten each cable in this group using an 8 mm (5/16 in) torque end wrench set to 0.9 N·m (8 lbf·in).

Table 1. ME7838E4 Multiport Rear Panel Cable Connections (2 of 2)

Index Part Number Cable Description Connection From Connection To

3. Rear Panel Connections Between Components (MS464xB VNA)

QSG-6 PN: 10410-00771 Rev. B VectorStar ME7838E4 QSG

3. Rear Panel Connections Between Components (MS464xB VNA)

In this section, connect the cables between the VNA and the Test Sets as shown in Figure 2 or Figure 3, and

Table 2.

Cable Connections (Systems with Option 031 Dual Source Architecture)

Figure 2 ME7838E4 Multiport BB/mmW VNA System – Rear Panel Cables (With Option 031)

WARNING

No operator service-

able parts inside.

Refer servicing to

qualified personnel.

Ext

Alc

Out

Ext

Analog

a1ba2b2

IF Outputs

External I/O

~ LINE INPUT

47-63 Hz

85-240 VAC

150 VA Max

Fuse 250V 2A T

CAUTION

Do not operate with

power cord ungrounded.

CAUTION

For continued fire protection

replace only with specified

type and rated fuse.

Cable Length

Standard Extended

Module Interface

MN469xC

Test Set

3736B

Test Set

3739C

Test Set

MS464xB

VNA

11 15

6666

7 7 7 7

Ext In ALC 1

and

Ext In ALC 2

(With Option 031)

Ext ALC 1

(With

Option 031)

Ext ALC 2

(With

Option 031)

3. Rear Panel Connections Between Components (MS464xB VNA)

VectorStar ME7838E4 QSG PN: 10410-00771 Rev. B QSG-7

Cable Connections (Systems without Option 031)

Figure 3 ME7838E4 Multiport BB/mmW VNA System – Rear Panel Cables (No Option 031)

WARNING

No operator service-

able parts inside.

Refer servicing to

qualified personnel.

Ext

Alc

Out

Ext

Analog

a1ba2b2

IF Outputs

External I/O

~ LINE INPUT

47-63 Hz

85-240 VAC

150 VA Max

Fuse 250V 2A T

CAUTION

Do not operate with

power cord ungrounded.

CAUTION

For continued fire protection

replace only with specified

type and rated fuse.

Cable Length

Standard Extended

Module Interface

MN469xC

Test Set

3736B

Test Set

3739C

Test Set

MS464xB

VNA

11 15

6666

7 7 7 7

3. Rear Panel Connections Between Components (MS464xB VNA)

QSG-8 PN: 10410-00771 Rev. B VectorStar ME7838E4 QSG

Table 2. ME7838E4 Multiport Rear Panel Cable Connections (MS464xB) (1 of 2)

Index Part Number Cable Description Connection From Connection To

13-806-225 BNC (male-male), 24 in MS464xB port labeled:

Ext Analog Out

3736B port labeled:

EXT ANALOG IN

3-806-225 BNC (male-male), 24 in

VNA port labeled:

Ext In ALC 1

(No Option 031) (Figure 3)

3736B port labeled:

EXT ALC OUT

3-806-225 BNC (male-male), 24 in

VNA port labeled:

Ext In ALC 1

(With Option 031) (Figure 2)

3739C port labeled:

EXT ALC OUT

3-806-225 BNC (male-male), 24 in

VNA port labeled:

Ext In ALC 2

(With Option 031) (Figure 2)

3736B port labeled:

EXT ALC OUT

33-806-225 BNC (male-male), 24 in

3736B port labeled:

(To Test Set) EXT ANALOG

OUT

3739C port labeled:

EXT ANALOG IN

43-806-225 BNC (male-male), 24 in

3736B port labeled:

(To Test Set) EXT ALC IN

(Figure 3)

(Not used with Option 031)

3739C port labeled:

EXT ALC OUT

73598-1a

(5 cable

bundle)

DB-25 3736B port labeled:

TO TEST SET EXTERNAL I/O

3739C port labeled:

EXTERNAL I/O

SMA male-male flexible:

3-72243-1

3-72243-2

3-72243-3

3-72243-4

3736B ports labeled:

(IF INPUTS)

3739C ports labeled:

(IF OUTPUTS)

73-80734a

(5 cable

bundle)

SMA male-male flexible:

3-72243-21

3-72243-22

3-72243-23

3-72243-24

MS464xB ports labeled:

(Inputs/Outputs)

a1 IF

b1 IF

a2 IF

b2 IF

3736B ports labeled:

(IF OUTPUTS)

a1 IF

b1 IF

a2 IF

b2 IF

8DB-25 MS464xB port labeled:

External I/O

3736B port labeled:

TO VNA EXTERNAL I/O

92100-1 GPIB, 1 m MS464xB port labeled:

Dedicated GPIB

MN469xC port labeled:

IEEE 488.2 GPIB

11 62112-81aSMA male-male

semi-rigid

MS464xB port labeled:

b2 loop out

MN469xC port labeled:

TO VNA b2 OUTPUT

12 62112-80aSMA male-male

semi-rigid

MS464xB port labeled:

b2 loop in

MN469xC port labeled:

TO VNA b2 INPUT

13 62112-81aSMA male-male

semi-rigid

MS464xB port labeled:

P2 source loop out

MN469xC port labeled:

TO VNA Port 2 Src OUTPUT

3. Rear Panel Connections Between Components (MS464xB VNA)

VectorStar ME7838E4 QSG PN: 10410-00771 Rev. B QSG-9

14 62112-80aSMA male-male

semi-rigid

MS464xB port labeled:

P2 source loop in

MN469xC port labeled:

TO VNA Port 2 Src INPUT

15 62112-81aSMA male-male

semi-rigid

MS464xB port labeled:

b1 loop out

MN469xC port labeled:

TO VNA b1 OUTPUT

16 62112-80aSMA male-male

semi-rigid

MS464xB port labeled:

b1 loop in

MN469xC port labeled:

TO VNA b1 INPUT

17 62112-81aSMA male-male

semi-rigid

MS464xB port labeled:

P1 source loop out

MN469xC port labeled:

TO VNA Port 1 Src OUTPUT

18 62112-80aSMA male-male

semi-rigid

MS464xB port labeled:

P1 source loop in

MN469xC port labeled:

TO VNA Port 1 Src INPUT

19 MS464xB VNA

20 MN469xC Test Set

21 3736B Test Set

22 3739C Test Set

a. Tighten each cable in this group using an 8 mm (5/16 in) torque end wrench set to 0.9 N·m (8 lbf·in).

Table 2. ME7838E4 Multiport Rear Panel Cable Connections (MS464xB) (2 of 2)

Index Part Number Cable Description Connection From Connection To

4. Semi-rigid Cable Connections Between System Components

QSG-10 PN: 10410-00771 Rev. B VectorStar ME7838E4 QSG

4. Semi-rigid Cable Connections Between System Components

Make the semi-rigid cable connections as shown in Figure 4 or Figure 5, and in Table 3.

If your system has Option 031 Dual Source Architecture (MS464xB only), use Figure 4. If your system does not

have Option 031, use Figure 5.

Figure 4 ME7838E4 Multiport Semi-rigid Cable Connections (with Option 031 Dual Source Architecture)

+27 dBm MAX AVOID STATIC DISCHARGE

ALL PORTS: CAUTION

Standby Operate

Frequency

Power

Sweep

Avg

Response

Display

Scale

Marker

Channel

Trace

Measurement

Calibration

Application

File

System

Help

Preset

RF LO 2

Out Out

In In

1 1 1 1 1 1 1

5 5

Install Termination

Removed from

VNA RF1 or RF2

Otros manuales de Instrumento de medición de Anritsu

Anritsu

Anritsu Spectrum Master MS2712E Manual de usuario

Anritsu

Anritsu VectorStar ME7838 Series Manual de usuario

Anritsu

Anritsu MT9085 Series Manual de instrucciones

Anritsu

Anritsu Microwave Site Master S820E Manual de usuario

Anritsu

Anritsu VectorStar MS4640A Series Manual de usuario

Anritsu

Anritsu MP1763C Manual de usuario

Anritsu

Anritsu MS2024A Manual de usuario

Anritsu

Anritsu 37 D Series Manual de usuario

Anritsu

Anritsu MT8820C Manual de usuario

Anritsu

Anritsu MW9076 Series Manual de usuario

Anritsu

Anritsu Site Master S311D Manual de usuario

Anritsu

Anritsu Bit Master MP1026B Manual del propietario

Anritsu

Anritsu Spectrum Master MS2723B Manual de usuario

Anritsu

Anritsu VectorStar ME7838 4 Series Manual de usuario

Anritsu

Anritsu LMR Master Manual de usuario

Anritsu

Anritsu MS2024A Manual de uso y cuidado

Anritsu

Anritsu MS2830A Manual de usuario

Anritsu

Anritsu MD1230A Manual de usuario

Anritsu

Anritsu BTS Master MT8222A Manual de usuario

Anritsu

Anritsu LMR Master S412E Manual de usuario

Anritsu

Anritsu Network Master MT9090A Series Manual de usuario

Anritsu

Anritsu MS2690A Manual de usuario

Anritsu

Anritsu ShockLine MS46522A Manual de usuario

Anritsu

Anritsu Spectrum Master MS2711D Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario