Anritsu MT1100A Network Master Flex Manual de usuario

MT1100AMT1100A

Network Master FlexNetwork Master Flex

Operation ManualOperation Manual

22nd Edition22nd Edition

For safety and warning information, please read thisFor safety and warning information, please read this

manual manual before attempting to use the equipment. before attempting to use the equipment.

Keep this manual with the equipment.Keep this manual with the equipment.

ANRITSU CORPORATIONANRITSU CORPORATION

Document No. M-W3735AE-22.0

MT1100A

Network Master Flex

Operation Manual

1 October 2014 (First Edition)

14 September 2018 (22nd Edition)

written permission of the publisher.

The contents of this manual may be changed without prior notice.

Printed in Japan

About This ManualAbout This Manual

The documentation for MT1100A Network Master Flex applies to the instrument

with the MU110010A, MU110011A, MU110012A, MU110013A Module and the

MU110001A, MU110002A Power supply Module installed. This operation manual

describes both the basic operation of the instrument as well as the operations

available via interface options and predefined applications/tests.

MT1100A Network Master Flex Operation Manual (this manual)MT1100A Network Master Flex Operation Manual (this manual)

Operations for the MT1100A Network Master Flex mainframe with Multirate

Modules, Power Supply Modules are described.

MT1100A Network Master Flex Quick Reference GuideMT1100A Network Master Flex Quick Reference Guide

A printed quick user's guide that introduces the basic operation of the

instrument.

MT1000A Network Master Pro MT1100A Network Master Flex MT1000A Network Master Pro MT1100A Network Master Flex

Remote Scripting Operation ManualRemote Scripting Operation Manual

Operations of the command-based Remote Control function are described.

Manual structureManual structure

The contents of the manual is structured in the following way:

Chapter 1 - IntroductionChapter 1 - Introduction

Chapter 2 - ConfigurationChapter 2 - Configuration

Chapter 3 - Human-Machine-InterfaceChapter 3 - Human-Machine-Interface

Chapter 4 - Graphical User InterfaceChapter 4 - Graphical User Interface

Chapter 5 - SDH/SONET/PDH/DSn ApplicationsChapter 5 - SDH/SONET/PDH/DSn Applications

Chapter 6 - Ethernet ApplicationChapter 6 - Ethernet Application

Chapter 7 - OTN ApplicationsChapter 7 - OTN Applications

Chapter 8 - CPRI/OBSAI ApplicationsChapter 8 - CPRI/OBSAI Applications

Chapter 9 - Fibre Channel (FC) ApplicationsChapter 9 - Fibre Channel (FC) Applications

Chapter 10 - Device Test ApplicationsChapter 10 - Device Test Applications

Chapter 11 - Utility ApplicationsChapter 11 - Utility Applications

Chapter 12 - SpecificationsChapter 12 - Specifications

Chapter 13 - SupportChapter 13 - Support

Chapter 4 consists of a general introduction to the GUI. Chapters 5-11 contain

descriptions of each screen, sub-screen and major dialog. The descriptions are

provided in the following order:

Setup and result screens for each application. The applications are described

in the same order as they appear on the application selector screen.

Ports setup screens and status information for each interface type.

Sub-screens and dialog boxes are described under the main screen from which they

are activated/launched.

This operation manual assumes the reader has the following basic knowledge:

Ethernet, SDH/SONET, PDH/DSn, OTN, CPRI/OBSAI, Fibre Channel, handling

optical parts

44
1111
1212
1313
13
13
13
13
13
14
1515
15
15
15
15
16
1717
17
17
18
19
2020
20
20
21
21
22
23
2525
2626
26
26
2727
27
28
29
3030
30
3131
31
31
3232
3535
3636
3737
37
3939
4040
40
42
4343
43
43
44
Table of ContentsTable of Contents
00  Table of ContentsTable of Contents
11  IntroductionIntroduction
1.11.1  MainframeMainframe
1.21.2  ModulesModules
1.2.1 10G Multirate Module (MU110010A)
1.2.2 100G Multirate Module (MU110011A)
1.2.3 40/100G Module CFP2 (MU110012A)
1.2.4 40/100G Advanced Module (MU110013A)
1.2.5 Battery and AC Power Supply Module (MU110001A)
1.2.6 AC only High Power Supply Module (MU110002A)
1.31.3  Symbols and ConventionsSymbols and Conventions
1.3.1 Symbols Used in Manual
1.3.2 Safety Symbols Used on Equipment
1.3.3 Notes
1.3.4 Hints
1.3.5 Option
1.41.4  For SafetyFor Safety
1.4.1 Dangers
1.4.2 Warnings
1.4.3 Cautions
1.4.4 Cautions Against Computer Virus Infection
1.51.5  PrecautionsPrecautions
1.5.1 Installation
1.5.2 Ventilation
1.5.3 ESD (Electrostatic Discharge)
1.5.4 Optical Surfaces
1.5.5 Cautions on Handling Optical Fiber Cables
1.5.6 Countries and Regions Permitting WLAN Use
22  ConfigurationConfiguration
2.12.1  Delivered AccessoriesDelivered Accessories
2.1.1 Standard Accessories
2.1.2 Optional Accessories
2.22.2  Rechargeable BatteryRechargeable Battery
2.2.1 Installing or Replacing Battery
2.2.2 Charging Battery
2.2.3 Battery Status Information
2.32.3  Measurement CablesMeasurement Cables
2.3.1 Connecting Measurement Cables
2.42.4  Support Stand and Carrying StrapSupport Stand and Carrying Strap
2.4.1 Support Stand
2.4.2 Carrying Strap and Handle
2.52.5  Replacing the ModulesReplacing the Modules
33  Human-Machine-InterfaceHuman-Machine-Interface
3.13.1  Touch Screen DisplayTouch Screen Display
3.23.2  Key OperationKey Operation
3.2.1 Power Button
3.33.3  Head SetHead Set
3.43.4  Connector PanelConnector Panel
3.4.1 Test Interfaces
3.4.2 Service Interfaces
3.53.5  Remote OperationRemote Operation
3.5.1 Installation of Control Software
3.5.2 Connection and Setup
3.5.3 Communication Ports
Table of ContentsTable of Contents
44

45
47
47
47
48
5050
5151
5252
52
52
5454
54
54
5555
5757
5858
58
59
60
67
69
70
70
7171
71
83
8989
89
89
90
90
91
9393
9494
94
100
102
109
113113
113
119
121
124
125125
125
131
136
142
144144
144
149
152
155
156156
156
158
3.5.4 Starting Control Software
3.5.5 Remote Upgrade
3.5.6 Remote Wake Up
3.5.7 Remote Reset
3.5.8 Stand-alone Editor
3.63.6  Command-Based Remote ControlCommand-Based Remote Control
3.73.7  File Access via USB InterfaceFile Access via USB Interface
3.83.8  File Access via Ethernet InterfaceFile Access via Ethernet Interface
3.8.1 Accessing files in Network Master from the PC
3.8.2 Mounting the Shared Folder of Networked PC to the Network
Master
3.93.9  GPS ReceiverGPS Receiver
3.9.1 G0325A GPS Receiver
3.9.2 Operating GPS Receiver
3.103.10  Remote Control via GPIBRemote Control via GPIB
44  Graphical User InterfaceGraphical User Interface
4.14.1  General Handling of the GUIGeneral Handling of the GUI
4.1.1 GUI Concept
4.1.2 Navigating in the GUI
4.1.3 Layout of the GUI Screens
4.1.4 Lamp Indication of Alarm/Error Status
4.1.5 Keypads for Entering Text in Fields
4.1.6 User Pattern Editor
4.1.7 Prompts to Confirm Dependencies
4.24.2  ToolbarsToolbars
4.2.1 Instrument Toolbar
4.2.2 Application Toolbar
4.34.3  Startup and Switch-off SequencesStartup and Switch-off Sequences
4.3.1 Instrument Startup
4.3.2 Application Startup
4.3.3 Accessing Previous Tests and Test Results
4.3.4 Closing an Application
4.3.5 Switching Off the Instrument
55  SDH/SONET/PDH/DSn ApplicationsSDH/SONET/PDH/DSn Applications
5.15.1  SDH Setup and StatusSDH Setup and Status
5.1.1 Transmitter Setup
5.1.2 Receiver Setup
5.1.3 Status Information
5.1.4 Errors/Alarms Insertion
5.25.2  SONET Setup and StatusSONET Setup and Status
5.2.1 Transmitter Setup
5.2.2 Receiver Setup
5.2.3 Status Information
5.2.4 Errors/Alarms Insertion
5.35.3  E1 Setup and StatusE1 Setup and Status
5.3.1 Transmitter Setup
5.3.2 Receiver Setup
5.3.3 Status Information
5.3.4 Errors/Alarms Insertion
5.45.4  DS1/J1 Setup and StatusDS1/J1 Setup and Status
5.4.1 Transmitter Setup
5.4.2 Receiver Setup
5.4.3 Status Information
5.4.4 Errors/Alarms Insertion
5.55.5  E3 Setup and StatusE3 Setup and Status
5.5.1 Transmitter Setup
5.5.2 Receiver Setup
55

160
161
162162
162
166
168
171
172172
172
174
175
176
177177
177
177
178
182182
182
182
187
198198
198
198
199
203203
204204
204
210
262
282
286286
286
286
298
308308
309
310310
310
310
311
314314
314
314
320
325325
325
326
327
328328
328
328
329
331331
331
332
333
334334
5.5.3 Status Information
5.5.4 Errors/Alarms Insertion
5.65.6  DS3 Setup and StatusDS3 Setup and Status
5.6.1 Transmitter Setup
5.6.2 Receiver Setup
5.6.3 Status Information
5.6.4 Errors/Alarms Insertion
5.75.7  E4 Setup and StatusE4 Setup and Status
5.7.1 Transmitter Setup
5.7.2 Receiver Setup
5.7.3 Status Information
5.7.4 Errors/Alarms Insertion
5.85.8  APSAPS
5.8.1 Ports Setup and Status
5.8.2 Test Setup
5.8.3 Test Results
5.95.9  BERTBERT
5.9.1 Ports Setup and Status
5.9.2 Test Setup
5.9.3 Test Results
5.105.10  RTDRTD
5.10.1 Ports Setup and Status
5.10.2 Test Setup
5.10.3 Test Results
66  Ethernet ApplicationsEthernet Applications
6.16.1  Ethernet Setup and StatusEthernet Setup and Status
6.1.1 Physical Port Setup
6.1.2 Ethernet Frame Setup
6.1.3 Status Information
6.1.4 Errors/Alarms Insertion
6.26.2  BERTBERT
6.2.1 Ports Setup and Status
6.2.2 Test Setup
6.2.3 Test Results
6.36.3  CableCable
6.3.1 Test Setup
6.46.4  Channel StatisticsChannel Statistics
6.4.1 Ports Setup and Status
6.4.2 Test Setup
6.4.3 Test Results
6.56.5  Mon/GenMon/Gen
6.5.1 Ports Setup and Status
6.5.2 Test Setup
6.5.3 Test Results
6.66.6  Pass ThroughPass Through
6.6.1 Ports Setup and Status
6.6.2 Test Setup
6.6.3 Test Results
6.76.7  PingPing
6.7.1 Ports Setup and Status
6.7.2 Test Setup
6.7.3 Test Results
6.86.8  ReflectorReflector
6.8.1 Ports Setup and Status
6.8.2 Test Setup
6.8.3 Test Results
6.96.9  RFC 2544RFC 2544
Table of ContentsTable of Contents
66

334
335
348
352
354354
354
355
360
365365
365
365
375
379379
379
380
381
382382
383
383
384
386
391391
392392
392
409
414
422
426
427427
427
427
428
431431
431
431
435
441441
441
441
442
445445
446446
447
448
452
455
457457
457
457
460
465465
465
465
465
467467
467
473
6.9.1 Ports Setup and Status
6.9.2 Test Setup
6.9.3 Test Results
6.9.4 Throughput Calculation
6.106.10  RFC 6349RFC 6349
6.10.1 Ports Setup and Status
6.10.2 Test Setup
6.10.3 Test Results
6.116.11  SAT 1564SAT 1564
6.11.1 Ports Setup and Status
6.11.2 Test Setup
6.11.3 Test Results
6.126.12  TracerouteTraceroute
6.12.1 Ports Setup and Status
6.12.2 Test Setup
6.12.3 Test Results
6.136.13  DiscoveryDiscovery
6.13.1 Ports Setup and Status
6.13.2 Test Setup
6.13.3 Test Results
6.13.4 Procedure
77  OTN ApplicationsOTN Applications
7.17.1  OTN Setup and StatusOTN Setup and Status
7.1.1 Transmitter Setup
7.1.2 Receiver Setup
7.1.3 Status Information
7.1.4 Error/Alarm Insertion
7.1.5 Restrictions for using two ports
7.27.2  APSAPS
7.2.1 Ports Setup and Status
7.2.2 Test Setup
7.2.3 Test Results
7.37.3  BERTBERT
7.3.1 Ports Setup and Status
7.3.2 Test Setup
7.3.3 Test Results
7.47.4  RTDRTD
7.4.1 Ports Setup and Status
7.4.2 Test Setup
7.4.3 Test Results
88  Mobile xHaul ApplicationsMobile xHaul Applications
8.18.1  CPRI/OBSAI Setup and StatusCPRI/OBSAI Setup and Status
8.1.1 Physical Port Setup
8.1.2 CPRI/OBSAI Frame Setup
8.1.3 Status Information
8.1.4 Error/Alarm Insertion
8.28.2  CPRI/OBSAI BERTCPRI/OBSAI BERT
8.2.1 Ports Setup and Status
8.2.2 Test Setup
8.2.3 Test Results
8.38.3  CPRI P. ThroughCPRI P. Through
8.3.1 Ports Setup and Status
8.3.2 Test Setup
8.3.3 Test Results
8.48.4  eCPRI/RoE BERTeCPRI/RoE BERT
8.4.1 Ports Setup and Status
8.4.2 Test Setup
77

473
473
477477
478478
479
480
484
486
488488
488
488
493
498498
498
499
506
511511
511
511
512
517517
518518
518
519
521
522522
522
522
523
527527
528528
528
530
532532
532
532
535535
536536
536
536
537
540
542542
545545
546546
546
547
547
548
548
549549
549
549
549
550550
550
8.4.2 Test Setup
8.4.3 Test Results
99  Fibre Channel (FC) ApplicationsFibre Channel (FC) Applications
9.19.1  Fibre Channel Setup and StatusFibre Channel Setup and Status
9.1.1 Physical Port Setup
9.1.2 Fibre Channel Frame Setup
9.1.3 Status Information
9.1.4 Errors/Alarms Insertion
9.29.2  BERTBERT
9.2.1 Ports Setup and Status
9.2.2 Test Setup
9.2.3 Test Results
9.39.3  PerformancePerformance
9.3.1 Ports Setup and Status
9.3.2 Test Setup
9.3.3 Test Results
9.49.4  ReflectorReflector
9.4.1 Ports Setup and Status
9.4.2 Test Setup
9.4.3 Test Results
1010  Device Test ApplicationsDevice Test Applications
10.110.1  Device Test Setup and StatusDevice Test Setup and Status
10.1.1 Physical Port Setup
10.1.2 Status Information
10.1.3 Errors/Alarms Insertion
10.210.2  No Frame TestNo Frame Test
10.2.1 Ports Setup and Status
10.2.2 Test Setup
10.2.3 Test Results
1111  Utility ApplicationsUtility Applications
11.111.1  ScenarioScenario
11.1.1 Scenario Manager
11.1.2 Running the Scenario
11.211.2  GPSGPS
11.2.1 Test Setup
11.2.2 Test Results
11.311.3  PDF ViewerPDF Viewer
11.411.4  VIPVIP
11.4.1 Application Toolbar
11.4.2 Connecting the Video Inspection Probe
11.4.3 Test Setup
11.4.4 Test Results
11.511.5  WiresharkWireshark
1212  SpecificationsSpecifications
12.112.1  MT1100AMT1100A
12.1.1 Configuration
12.1.2 External Interfaces
12.1.3 Other Interfaces
12.1.4 Environment Performance
12.1.5 Mechanical Performance
12.212.2  MU110001A, Battery and AC Power Supply ModuleMU110001A, Battery and AC Power Supply Module
12.2.1 Configuration
12.2.2 Environment Performance
12.2.3 Mechanical Performance
12.312.3  MU110002A, AC only High Power Supply ModuleMU110002A, AC only High Power Supply Module
12.3.1 Configuration
Table of ContentsTable of Contents
88

550
550
551551
551
552
556
556
557557
557
558
561
561
562562
562
563
565
565
566566
566
567
569
569
570570
570
582
593
604
605
607
609609
613613
614614
614
614
614
616616
617617
618618
618
618
619619
619
619
619
620620
620
620
620
621621
621
621
622
622
622
623623
627627
629629
12.3.2 Environment Performance
12.3.3 Mechanical Performance
12.412.4  MU110010A, 10G Multirate ModuleMU110010A, 10G Multirate Module
12.4.1 Configuration
12.4.2 External Interfaces
12.4.3 Environment Performance
12.4.4 Mechanical Performance
12.512.5  MU110011A, 100G Multirate ModuleMU110011A, 100G Multirate Module
12.5.1 Configuration
12.5.2 External Interfaces
12.5.3 Environment Performance
12.5.4 Mechanical Performance
12.612.6  MU110012A, 40/100G Module CFP2MU110012A, 40/100G Module CFP2
12.6.1 Configuration
12.6.2 External Interfaces
12.6.3 Environment Performance
12.6.4 Mechanical Performance
12.712.7  MU110013A, 40/100G Advanced ModuleMU110013A, 40/100G Advanced Module
12.7.1 Configuration
12.7.2 External Interfaces
12.7.3 Environment Performance
12.7.4 Mechanical Performance
12.812.8  Measurement FunctionalityMeasurement Functionality
12.8.1 Ethernet Measurements
12.8.2 SDH/SONET/PDH/DSn
12.8.3 OTN
12.8.4 Fibre Channel
12.8.5 CPRI/OBSAI
12.8.6 Device Test
12.912.9  Optical ModulesOptical Modules
1313  SupportSupport
13.113.1  Maintenance and CleaningMaintenance and Cleaning
13.1.1 Maintenance
13.1.2 Cleaning
13.1.3 Storage
13.213.2  CalibrationCalibration
13.313.3  Formatting the data area in the Network MasterFormatting the data area in the Network Master
13.413.4  Upgrading the SoftwareUpgrading the Software
13.4.1 Installation by using USB memory stick
13.4.2 Installation via Network
13.513.5  Support and Service AssistanceSupport and Service Assistance
13.5.1 Before you obtain assistance
13.5.2 Data Backup
13.5.3 Obtaining Support or Service Assistance
13.613.6  Transporting and DisposalTransporting and Disposal
13.6.1 Repackaging
13.6.2 Transporting
13.6.3 Disposal
13.713.7  Special InformationSpecial Information
13.7.1 Equipment Certificate
13.7.2 Anritsu Warranty
13.7.3 Anritsu Corporation Contact
13.7.4 Licensing Information
13.7.5 Availability of Source Code
13.813.8  Software License DocumentSoftware License Document
13.913.9  EULA License DocumentEULA License Document
13.1013.10  CE Conformity MarkingCE Conformity Marking
99

629
629
629
630
631
632632
632
632
633633
633
636
636
638638
638
638
638
638
639
640640
640
640
640
641
13.10.1 Product Model
13.10.2 Applied Directive
13.10.3 Applied Standards
13.10.4 Authorized Representative
13.10.5 CE Declaration
13.1113.11  RCM Conformity MarkingRCM Conformity Marking
13.11.1 Product Model
13.11.2 Applied Standards
13.1213.12  Laser SafetyLaser Safety
13.12.1 Laser Safety Classifications
13.12.2 Indication Labels on Product
13.12.3 Laser Radiation Markings
13.1313.13  Wireless CertificationWireless Certification
13.13.1 Japan MIC
13.13.2 North America (USA FCC and Canada IC)
13.13.3 Europe CE
13.13.4 Mexico IFETEL
13.13.5 Singapore IMDA
13.1413.14  DeclarationsDeclarations
13.14.1 Notes on Export Management
13.14.2 Information for EU and EFTA Customers Only
13.14.3 Information for U.S. Customers Only
13.14.4 Information for the Chinese Market Only
Table of ContentsTable of Contents
1010