Alliance Laundry Systems 50 Pound Series Manual de usuario

Installation

www.comlaundry.com

Drying Tumblers

50 Pound Capacity

75 Pound Capacity

Refer to Page 4 for Model Identification

TMB795C

NOTA: Para bajar una

copia de estas

instrucciones en

español, visite

www.comlaundry.com.

Part No. M414905R10

August 2007

Keep These Instructions for Future Reference.

(If this machine changes ownership, this manual must accompany machine.)

TMB795C

M414905 1

Installation must conform with local codes or in the absence of local codes with:

In the U.S.A.,installation must conform to the latest edition of the American National Standard Z223.1/

NFPA 54 “National Fuel Gas Code” and Standard ANSI/NFPA 70 “National Electric Code.”

In Canada, installation must comply with Standards CSA-B149.1 or Natural Gas and Propane Installation

Code and CSA C22.1, latest edition, Canadian Electric Code, Part I.

In Australia, installation must comply with the Australian Gas Association Installation Code for Gas

Burning Appliances and Equipment.

The following information applies to the state of

Massachusetts, USA.

• This appliance can only be installed by a

Massachusetts licensed plumber or gas fitter.

• This appliance must be installed with a 36 inch

(91 cm) long flexible gas connector.

• A "T-Handle" type gas shut-off valve must be

installed in the gas supply line to this appliance.

• This appliance must not be installed in a bedroom

or bathroom.

IMPORTANT: Information must be obtained from a local gas supplier on instructions to be followed if the

user smells gas. These instructions must be posted in a prominent location. Step-by-step instructions of the

above safety information must be posted in a prominent location near the tumbler for customer use.

FOR YOUR SAFETY, the information in this

manual must be followed to minimize the

risk of fire or explosion or to prevent

property damage, personal injury or death.

W033

• Do not store or use gasoline or other

flammable vapors and liquids in the

vicinity of this or any other appliance.

• WHAT TO DO IF YOU SMELL GAS:

– Do not try to light any appliance.

– Do not touch any electrical switch; do

not use any phone in your building.

– Clear the room, building or area of all

occupants.

– Immediately call your gas supplier from

a neighbor’s phone. Follow the gas

supplier’s instructions.

– If you cannot reach your gas supplier,

call the fire department.

• Installation and service must be

performed by a qualified installer, service

agency or the gas supplier. W052

FOR YOUR SAFETY

Do not store or use gasoline or other

flammable vapors and liquids in the

vicinity of this or any other appliance. W053

WARNING

POUR VOTRE SÉCURITÉ, les informations

de ce guide doivent être respectées afin de

réduire les risques d’incendie, d’explosion

ou d’éviter les dommages matériels,

personnels ou blessures mortelles. W033R3QU

• Ne pas entreposer ou utiliser d’essence

ou toutes autres vapeurs et liquides

inflammables à proximité de cette

machine ou de tout autre appareil.

• QUE FAIRE EN CAS D’ODEUR DE GAZ :

– Ne pas mettre d’appareil en marche.

– Ne pas toucher aux interrupteurs

électriques ; ne pas utiliser le

téléphone des lieux.

– Évacuer la pièce, le bâtiment ou la zone

de tous les occupants.

– Appeler immédiatement le fournisseur

de gaz de la maison d’un voisin.

Respecter les instructions

communiquées par le fournisseur.

– Si vous ne pouvez pas joindre le

fournisseur de gaz, appeler le service

d’incendie.

• L’installation et l’entretien doivent être

effectués par un installateur, service

d’entretien qualifiés ou par le fournisseur

de gaz. W052R5QU

POUR VOTRE SÉCURITÉ

Ne pas entreposer ou utiliser d’essence ou

toutes autres vapeurs et liquides

inflammables à proximité de cette unité ou

de tout autre appareil. W053R2QU

MISE EN GARDE

means without the expressed written consent of the publisher.

2M414905

Table of

Contents

Introduction......................................................................................... 4

Model Identification ............................................................................. 4

Customer Service.................................................................................. 6

Wiring Diagram .................................................................................... 6

Serial Plate Location............................................................................. 6

Safety Information.............................................................................. 7

Important Safety Instructions ............................................................... 8

Specifications and Dimensions........................................................... 10

Cabinet Dimensions.............................................................................. 11

Exhaust Outlet Locations...................................................................... 12

Gas Connection Locations.................................................................... 13

Electrical Connection Locations........................................................... 14

Steam Connection Locations ................................................................ 15

Installation........................................................................................... 16

Pre-Installation Inspection .................................................................... 16

Location Requirements......................................................................... 17

Position and Level the Tumbler............................................................ 18

Bolt-On Angle Option .......................................................................... 18

To Reverse the Loading Door............................................................... 20

Before Placing Tumbler into Service ................................................... 23

Required for CE Models Only.............................................................. 24

Installing CE Gas Drying Tumblers ..................................................... 24

General Information......................................................................... 24

Basic Configuration ......................................................................... 26

Specific Conversion Procedures ...................................................... 26

Exhaust Requirements ....................................................................... 29

Layout ................................................................................................... 29

Make-Up Air......................................................................................... 29

Venting ................................................................................................. 29

Individual Venting ........................................................................... 30

Manifold Venting............................................................................. 30

Gas Requirements............................................................................... 34

Gas Supply Pipe Sizing and Looping ................................................... 36

High Altitude Burner Orifice Sizing..................................................... 38

Electrical Requirements..................................................................... 39

Grounding Instructions ......................................................................... 39

For CE Models Only........................................................................ 39

Service/Ground Location...................................................................... 40

To Connect Electrical Service To The Tumbler................................... 41

Jumper Configuration Instructions ....................................................... 43

Ferrite Ring Installation........................................................................ 43

50 Pound Gas and Steam Models ......................................................... 44

75 Pound Gas and Steam Models ......................................................... 45

50 and 75 Pound Electric Models......................................................... 46

M414905 3

Steam Requirements........................................................................... 47

Piping Recommendations ..................................................................... 48

Installing Steam Trap and Making Condensate Return Connections... 48

Thermal Oil Prep .................................................................................. 48

Single Drop Timer .............................................................................. 50

Power-Up Mode.................................................................................... 50

Ready Mode.......................................................................................... 50

Start Mode ............................................................................................ 50

Run Mode ............................................................................................. 50

Setting Dry Time Dipswitches.............................................................. 50

Dipswitch Settings ................................................................................ 51

Rotary Coin Drop Timer.................................................................... 53

Installing Accessory Timing Cam ........................................................ 53

Removal of Existing Timing Cam ................................................... 53

Installation of New Timing Cam ..................................................... 53

Adjustments......................................................................................... 54

Gas Burner Air Shutter ......................................................................... 54

Airflow Switch...................................................................................... 55

Gas and Electric Tumblers............................................................... 55

Loading Door Switch............................................................................ 57

Loading Door Catch ............................................................................. 57

Drive Belt.............................................................................................. 57

Nonreversing Models....................................................................... 57

Reversing Models ............................................................................ 57

Removing Tumbler from Service...................................................... 60

M414905

4© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Introduction

Model Identification

Information in this manual is applicable to these models:

Suffixes listed on the following page.

Gas Steam/Thermal Oil Electric

Pound

AT050L

AT050N

CHD50G2-CA050L

CHD50G2-CA050N

CHD50G2-CT050L

CHD50G2-CT050N

CHD50G2-CU050L

CHD50G2-CU050N

DR50G2-BA050L

DR50G2-BA050N

DR50G2-BT050L

DR50G2-BT050N

DR50G2-BU050L

DR50G2-BU050N

GT050L

GT050N

GU050L

GU050N

HA050L

HA050N

HT050D

HT050L

HT050N

HU050L

HU050N

IPD50G2-IT050L

IPD50G2-IT050N

NT050L

NT050N

SA050L

SA050N

ST050D

ST050L

ST050N

SU050L

SU050N

UA050L

UA050N

UT050L

UT050N

UU050L

UU050N

YT050L

YT050N

AT050S

BT050T

BU050T

CHD50S2-CT050S

CHD50S2-CU050S

CT050T

CU050T

DR50S2-BT050S

DR50S2-BU050S

GT050S

GU050S

HT050S

HT050T

HU050S

HU050T

IPD50S2-IT050S

IT050T

ST050S

ST050T

SU050S

SU050T

UT050S

UT050T

UU050S

UU050T

YT050S

YT050T

AT050E

CHD50E2-CT050E

CHD50E2-CU050E

DR50E2-BT050E

DR50E2-BU050E

GT050E

GU050E

HT050E

HU050E

IPD50E2-IT050E

ST050E

SU050E

UT050E

UU050E

YT050E

Pound

AT075L

AT075N

CHD75G2-CA075L

CHD75G2-CA075N

CHD75G2-CT075L

CHD75G2-CT075N

CHD75G2-CU075L

CHD75G2-CU075N

DR75G2-BA075L

DR75G2-BA075N

DR75G2-BT075L

DR75G2-BT075N

DR75G2-BU075L

DR75G2-BU075N

GT075L

GT075N

GU075L

GU075N

HA075L

HA075N

HT075D

HT075L

HT075N

HU075L

HU075N

IPD75G2-IT075L

IPD75G2-IT075N

NT075L

NT075N

SA075L

SA075N

ST075D

ST075L

ST075N

STF75L

STF75N

SU075L

SU075N

UA075L

UA075N

UT075L

UT075N

UTF75L

UTF75N

UU075L

UU075N

YT075L

YT075N

AT075S

BT075T

BU075T

CHD75S2-CT075S

CHD75S2-CU075S

CT075T

CU075T

DR75S2-BT075S

DR75S2-BU075S

GT075S

GU075S

HT075S

HT075T

HU075S

HU075T

IPD75S2-IT075S

IT075T

ST075S

ST075T

SU075S

SU075T

UT075S

UT075T

UU075S

UU075T

YT075S

YT075T

YU075S

YU075T

AT075E

CHD75E2-CT075E

CHD75E2-CU075E

DR75E2-BT075E

DR75E2-BU075E

GT075E

GU075E

HT075E

HU075E

IPD75E2-IT075E

ST075E

SU075E

UB075E

UT075E

UU075E

YT075E

YU075E

Introduction

M414905 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Includes models with the following control suffixes:

3O –DX4 OPL DO –DMP OPL RD –reversing DMP OPL

3V –DX4 vended DV –DMP vended RM –reversing OPL micro

3X –DX4 prep for coin DX –DMP prep for coin RQ –reversing dual digital timer

BC –basic electronic, coin MT –manual timer RT –reversing manual timer

BL –basic electronic, central pay NC –NetMaster coin SD –single drop

BU –basic electronic, prep card-open NR –NetMaster card SX –single drop, prep for coin

BX –basic electronic, prep for coin NX –NetMaster, prep for coin ZC –NetMaster network, coin

BY –basic electronic, prep for card NY –NetMaster, prep for card ZR –NetMaster network, card

CD –rotary coin drop OM –OPL micro ZX –NetMaster network, prep for coin

CX –prep for coin QT –dual digital timer ZY –NetMaster network, prep for card

CY –prep for card R3 –reversing DX4 OPL

Introduction

M414905

6© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Customer Service

If literature or replacement parts are required, contact

the source from which the machine was purchased or

contact Alliance Laundry Systems at (920) 748-3950

for the name and address of the nearest authorized

parts distributor.

For technical assistance, call (920) 748-3121.

Wiring Diagram

The wiring diagram is located in the junction or

contactor box.

Models starting Serial No. 0309_____ or later will

have the wiring diagram part number in the lower

portion of the electrical data on the serial plate.

Serial Plate Location

When calling or writing for information about your

product, be sure to mention model and serial numbers.

Model and serial numbers are found on serial plate on

the rear of machine and inside door.

TMB803N

1Serial Plate

TMB803N

4030

PUSH

START

HEATCOOL

DOWN

HIGH

TEMPERATURE

LOW

Conversion Table

Multiply By To Obtain Multiply By To Obtain

Btu 0.252 kCal Pounds/sq. inch 0.06895 Bars

Btu 1055 Joules Pounds/sq. inch 0.070 kg/sq. cm

Inch 25.4 Millimeters Pounds (lbs.) 0.454 Kilograms

Inches W.C. 0.036 Pounds/sq. inch Boiler Horsepower 33,479 Btu/hr.

Inches W.C. 0.249 kPa Boiler Horsepower 34.5 lbs. steam/hr.

lb/inch2(psi) 6.895 kPa CFM 0.471 liters/second

ft328.32 Liters kW 3414 Btu/hr.

M414905 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Safety Information

Precautionary statements (“DANGER,” “WARNING,”

and “CAUTION”), followed by specific instructions,

are found in this manual and on machine decals. These

precautions are intended for the personal safety of the

operator, user, servicer, and those maintaining the

machine.

Additional precautionary statements (“IMPORTANT”

and “NOTE”) are followed by specific instructions.

IMPORTANT: The word “IMPORTANT” is used

to inform the reader of specific procedures where

minor machine damage will occur if the procedure

is not followed.

NOTE: The word “NOTE” is used to communicate

installation, operation, maintenance or servicing

information that is important but not hazard

related.

NOTE: The WARNING and IMPORTANT

instructions appearing in this manual are not

meant to cover all possible conditions and

situations that may occur. It must be understood

that common sense, caution and carefulness are

factors which CANNOT be built into this tumbler.

These factors MUST BE supplied by the person(s)

installing, maintaining or operating the tumbler.

Always contact your dealer, distributor, service agent

or the manufacturer on any problems or conditions you

do not understand.

Indicates an imminently hazardous

situation that, if not avoided, will cause

severe personal injury or death.

DANGER

Indicates a hazardous situation that, if not

avoided, could cause severe personal

injury or death.

WARNING

Indicates a hazardous situation that, if not

avoided, may cause minor or moderate

personal injury or property damage.

CAUTION

Failure to install, maintain, and/or operate

this machine according to manufacturer’s

instructions may result in conditions which

can produce serious injury, death and/or

property damage. W051R1

WARNING

Safety Information

M414905

8© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Save These Instructions

Important Safety Instructions

1. Read all instructions before using the tumbler.

2. Refer to the GROUNDING INSTRUCTIONS

for the proper grounding of the tumbler.

3. Do not dry articles that have been previously

cleaned in, washed in, soaked in, or spotted with

gasoline, dry cleaning solvents, other flammable

or explosive substances as they give off vapors

that could ignite or explode.

4. Do not allow children on or in the tumbler. This

appliance is not intended for use by young

children or infirm persons without supervision.

Young children should be supervised to ensure

that they do not play with the appliance.

5. Before the tumbler is removed from service or

discarded, remove the door to the drying

compartment and the door to the lint

compartment.

6. Do not reach into the tumbler if the cylinder is

revolving.

7. Do not install or store the tumbler where it will

be exposed to water and/or weather.

8. Do not tamper with the controls.

9. Do not repair or replace any part of the tumbler,

or attempt any servicing unless specifically

recommended in the user-maintenance

instructions or in published user-repair

instructions that you understand and have the

skills to carry out.

10. Do not use fabric softeners or products to

eliminate static unless recommended by the

manufacturer of the fabric softener or product.

11. To reduce the risk of fire, DO NOT DRY plastics

or articles containing foam rubber or similarly

textured rubberlike materials.

12. Always clean the lint filter daily.

13. Keep area around the exhaust opening and

adjacent surrounding area free from the

accumulation of lint, dust and dirt.

14. The interior of the tumbler and the exhaust duct

should be cleaned periodically by qualified

service personnel.

15. If not installed, operated and maintained in

accordance with the manufacturer’s instructions

or if there is damage to or mishandling of this

product’s components, use of this product could

expose you to substances in the fuel or from fuel

combustion which can cause death or serious

illness and which are known to the State of

California to cause cancer, birth defects or other

reproductive harm.

16. Tumbler will not operate with the loading door

open. DO NOT bypass the door safety switch to

permit the tumbler to operate with the door open.

The tumbler will stop tumbling when the door is

opened. Do not use the tumbler if it does not stop

tumbling when the door is opened or starts

tumbling without pressing or turning the START

mechanism. Remove the tumbler from use and

call for service.

17. Tumbler will not operate with lint panel open.

DO NOT bypass lint panel safety switch to

permit the tumbler to operate with the lint panel

open.

18. Do not put articles soiled with vegetable or cooking

oil in the tumbler, as these oils may not be

removed during washing. Due to the remaining

oil, the fabric may catch on fire by itself.

19. To reduce the risk of fire, DO NOT put clothes

which have traces of any flammable substances

such as machine oil, flammable chemicals,

thinner, etc. or anything containing wax or

chemicals such as in mops and cleaning cloths, or

anything dry-cleaned at home with dry-cleaning

solvent in the tumbler.

20. Use the tumbler only for its intended purpose,

drying fabrics.

21. ALWAYS disconnect and lockout the electrical

power to the tumbler before servicing. Disconnect

power by shutting off appropriate breaker or fuse.

22. Install this tumbler according to the

INSTALLATION INSTRUCTIONS. All

connections for electrical power, grounding, and

gas supply must comply with local codes and be

made by licensed personnel when required.

Hazardous Voltage. Can cause shock, burn

or cause death. Allow machine power to

remain off for two minutes prior to working

in and around AC inverter drive. W359

WARNING

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Secadora de Alliance Laundry Systems

Alliance Laundry Systems

Alliance Laundry Systems ADE3SRGS173CW01 Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems DRY724C_SVG Guía

Alliance Laundry Systems

Alliance Laundry Systems DRY735C-SVG Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems T453I Guía de solución de problemas

Alliance Laundry Systems

Alliance Laundry Systems 70444901R3 Manual del propietario

Alliance Laundry Systems

Alliance Laundry Systems D677I_SVG Instrucciones de funcionamiento originales

Alliance Laundry Systems

Alliance Laundry Systems DRY2024N Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems ATB50CG Instrucciones de funcionamiento

Alliance Laundry Systems

Alliance Laundry Systems LWS01M series Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems ADEE8B BLACK Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems DV6010WE Guía

Alliance Laundry Systems

Alliance Laundry Systems JT30XG Manual del propietario

Alliance Laundry Systems

Alliance Laundry Systems 506126R5 Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems KE Series Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems LTS87A*H Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems DR5000WG Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems D715I Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems 505048R2 Manual del propietario

Alliance Laundry Systems

Alliance Laundry Systems LES37AW Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems TR3003WN Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems Speed Queen DR7004WE Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems AT170FG Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems 70420801 Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems LTS97A*N Manual de usuario

Manuales populares de Secadora de otras marcas

Bosch

Bosch WTA79200GB Manual de usuario

Amana

Amana W10233410A Manual de usuario

Miele

Miele TWH 780 WP Manual de usuario

Asko

Asko T760 Manual de usuario

Bosch

Bosch Logixx 10 WTB76556GB Hoja de especificaciones

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Manual de instrucciones

Electrolux

Electrolux EW2H328R2 Manual de usuario

Beko

Beko DS8433RX1M Manual de usuario

Dawlance

Dawlance Spinner DS 6000 C Manual de usuario

Electrolux

Electrolux TP5080TW Manual de usuario

AEG

AEG TR838P4OB Manual de usuario

Indesit

Indesit IDV 75 Manual de usuario

Infiniton

Infiniton SD-DG85C Manual de usuario

BOMANN

BOMANN WT 5019 Manual de usuario

Asko

Asko T793C Manual de usuario

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer Manual de usuario

Frigidaire

Frigidaire CAQE7077KW0 Manual del propietario

Bosch

Bosch WTX8HKM9SN Manual de usuario