Allen-Bradley PanelView Plus 2711P Manual de usuario

PanelView Plus

Operator Terminals

2711P

(400, 600, 700, 1000, 1250, 1500)

User Manual

AB Drives

Important User Information

Solid state equipment has operational characteristics differing from those of

electromechanical equipment. Safety Guidelines for the Application,

Installation and Maintenance of Solid State Controls (Publication SGI-1.1

available from your local Rockwell Automation sales office or online at

http://www.ab.com/manuals/gi) describes some important differences

between solid state equipment and hard-wired electromechanical devices.

Because of this difference, and also because of the wide variety of uses for

solid state equipment, all persons responsible for applying this equipment

must satisfy themselves that each intended application of this equipment is

acceptable.

In no event will Rockwell Automation, Inc. be responsible or liable for

indirect or consequential damages resulting from the use or application of

this equipment.

The examples and diagrams in this manual are included solely for illustrative

purposes. Because of the many variables and requirements associated with

any particular installation, Rockwell Automation, Inc. cannot assume

responsibility or liability for actual use based on the examples and diagrams.

No patent liability is assumed by Rockwell Automation, Inc. with respect to

use of information, circuits, equipment, or software described in this manual.

Reproduction of the contents of this manual, in whole or in part, without

written permission of Rockwell Automation, Inc. is prohibited.

Throughout this manual we use notes to make you aware of safety

considerations.

WARNING Identifies information about practices or circumstances

that can cause an explosion in a hazardous environment,

which may lead to personal injury or death, property

damage, or economic loss.

IMPORTANT Identifies information that is critical for successful

application and understanding of the product.

ATTENTION Identifies information about practices or circumstances

that can lead to personal injury or death, property

damage, or economic loss. Attentions help you:

•identify a hazard

•avoid a hazard

•recognize the consequence

SHOCK HAZARD Labels may be located on or inside the drive to alert

people that dangerous voltage may be present.

BURN HAZARD Labels may be located on or inside the drive to alert

people that surfaces may be dangerous temperatures.

iPublication2711P-UM001B-EN-P

Table of Contents

Important User Information . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Preface

Objectives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preface-i

Packing List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preface-i

Manual Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preface-ii

Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . Preface-ii

Related Publications . . . . . . . . . . . . . . . . . . . . . . . . Preface-iii

European Communities (EC) Directive Compliance . Preface-iii

Rockwell Automation Support . . . . . . . . . . . . . . . . . Preface-iv

Chapter 1

Overview

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Software Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

PanelView Plus 400 - 600 Features. . . . . . . . . . . . . . . . . . . 1-2

PanelView Plus 700 - 1500 Features . . . . . . . . . . . . . . . . . . 1-7

Catalog Number Configuration. . . . . . . . . . . . . . . . . . . . . . 1-12

PanelView Plus Product Components. . . . . . . . . . . . . . . . . 1-12

Chapter 2

Installation

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Hazardous Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Environmental Considerations . . . . . . . . . . . . . . . . . . . . . . 2-3

Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Cutout Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Mounting Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

400 - 600 Panel Installation . . . . . . . . . . . . . . . . . . . . . . . . 2-11

700 - 1500 Panel Installation . . . . . . . . . . . . . . . . . . . . . . . 2-13

Chapter 3

Applying Power

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Wiring and Safety Guidelines. . . . . . . . . . . . . . . . . . . . . . . 3-1

Installing and Removing Power Terminal Block . . . . . . . . . 3-2

Connecting DC Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Connecting AC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Resetting the Terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Startup Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Chapter 4

Using Configuration Mode

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Starting Configuration Mode . . . . . . . . . . . . . . . . . . . . . . . 4-1

Loading an ME Application . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Running an Application. . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Application Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Terminal Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Networks and Communications . . . . . . . . . . . . . . . . . . . . . 4-6

AB Drives

Publication 2711P-UM001B-EN-P

Table of Contents ii

Diagnostic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15

File Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16

Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19

Font Linking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21

Input Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22

Print Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26

Startup Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28

System Event Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32

System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33

Time/Date/Regional Settings . . . . . . . . . . . . . . . . . . . . . . . 4-36

Chapter 5

Installing and Replacing

Components

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Installing RAM and Internal Compact Flash . . . . . . . . . . . . 5-2

Installing and Replacing the Logic Module . . . . . . . . . . . . . 5-3

Installing/Replacing a Communication Module . . . . . . . . . . 5-5

Replacing the Display Module . . . . . . . . . . . . . . . . . . . . . . 5-9

Replacing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

Replacing Bezel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13

Replacing Backlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15

Installing the Remote AC Power Supply . . . . . . . . . . . . . . . 5-18

Removing the Product ID Label . . . . . . . . . . . . . . . . . . . . . 5-18

Installing Keypad Legend Inserts . . . . . . . . . . . . . . . . . . . . 5-19

Using an External Compact Flash Card. . . . . . . . . . . . . . . . 5-20

Chapter 6

Terminal Connections

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Wiring and Safety Guidelines. . . . . . . . . . . . . . . . . . . . . . . 6-1

Logic Controller Cable Charts . . . . . . . . . . . . . . . . . . . . . . 6-2

USB Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5

Serial Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6

Ethernet Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9

DH-485/DH+/Remote I/O Module . . . . . . . . . . . . . . . . . . . 6-11

ControlNet Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16

Chapter 7

Transferring files and Upgrading

Firmware

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Transferring Files Using a Compact Flash Card . . . . . . . . . . 7-1

Transferring Files from a Computer . . . . . . . . . . . . . . . . . . 7-1

Upgrading Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Upgrading Firmware Using a Firmware Upgrade Card . . . . 7-8

Publication2711P-UM001B-EN-P

Table of Contents iii

Chapter 8

Troubleshooting and Maintenance

Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

General Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

Troubleshooting Components . . . . . . . . . . . . . . . . . . . . . . 8-4

Ethernet Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8

Advanced Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Startup Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10

Startup Status Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

System Identification Errors . . . . . . . . . . . . . . . . . . . . . . . . 8-12

Entering Configuration Mode during Startup. . . . . . . . . . . . 8-13

Startup Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14

Restarting in Safe Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14

Cleaning the Display Window . . . . . . . . . . . . . . . . . . . . . . 8-15

Appendix A - Specifications

Appendix B - Compatible USB Devices

Appendix C - Available Fonts for Terminals

Index

AB Drives

Publication 2711P-UM001B-EN-P

Table of Contents iv

iPublication2711P-UM001B-EN-P

Preface

Objectives

This preface provides information on the contents of this manual

including:

•Contents of manual

•Intended audience

•European Union Directive Compliance

•Rockwell Automation Support

Packing List

The following items are shipped with an assembled PanelView™ Plus

terminal:

•Power terminal block

•RSView Machine Edition Runtime

•Mounting levers for 400 -600 terminals (up to 6) or

•Mounting clips for 700 - 1500 terminals (up to 8)

•Installation Instructions

AB Drives

Publication 2711P-UM001B-EN-P

Preface ii

Manual Contents

Intended Audience

No special knowledge is required to understand this manual or

operate the PanelView Plus terminal. However, it is important that you

understand the functions and operations of Machine Edition

applications that will run on the terminal. Consult the application

designer for this information.

Equipment installers must be familiar with standard panel installation

techniques.

Chapter Title Description

1 Overview Provides overview of the PanelView

Plus terminals including features and

product components.

2 Installation Gives Instructions on how to install

the PanelView Plus terminal in a

panel or enclosure.

3 Applying Power Describes how to apply power and

reset the PanelView Plus terminal.

4 Using Configuration Mode Shows how to use the PanelView

Plus configuration screens to

load/run applications and configure

terminal settings for the PanelView

Plus terminal.

5 Installing and Replacing

Components Shows how to install and replace

components of the PanelView Plus

terminal including:

•Logic Module

•RAM/Internal Compact Flash

•Communication Module

•Display Module

•Battery

•Display Module Bezel

•Backlight

•AC Power Supply

•Product Label

•Keypad Legend Inserts

•External Compact Flash Card

6 Terminal Connections Describes connections on the base

unit of the PanelView Plus terminal

and the communication modules.

7 Transferring Files and Upgrading

Firmware Provides information on transferring

files using an External Compact Flash

Card and performing firmware

upgrades.

8 Troubleshooting and

Maintenance Provides assistance on isolating

problems and general maintenance.

Publication2711P-UM001B-EN-P

Preface iii

Related Publications

You may want to refer to the following for additional information:

•online help for RSView Studio or RSLinx

•documentation for your logic controller or processor

European Communities (EC)

Directive Compliance

If this product has the CE mark it is approved for installation within

the European Union and EEA regions. It has been designed and tested

to meet the following directives.

EMC Directive

This product is tested to meet the Council Directive 89/336/EC

Electromagnetic Compatibility (EMC) by applying the following

standards, in whole or in part, documented in a technical construction

file:

•EN 50081-2 EMC - Generic Emission Standard, Part 2 - Industrial

Environment

•EN 61000-6-2 EMC - Generic Immunity Standard, Part 2 -

Industrial Environment

This product is intended for use in an industrial environment.

Low Voltage Directive

This product is tested to meet Council Directive 73/23/EEC Low

Voltage, by applying the safety requirements of EN 61131-2

Programmable Controllers, Part 2 - Equipment Requirements and

Tests. For specific information required by EN 61131-2, see the

appropriate sections in this publication, as well as the Allen-Bradley

publication Industrial Automation Wiring and Grounding Guidelines

For Noise Immunity, publication 1770-4.1.

Open style devices must be provided with environmental and safety

protection by proper mounting in enclosures designed for specific

application conditions. See NEMA Standards publication 250 and IEC

publication 529, as applicable, for explanations of the degrees of

protection provided by different types of enclosure.

AB Drives

Publication 2711P-UM001B-EN-P

Preface iv

Rockwell Automation

Support

Rockwell Automation provides technical information on the web to assist you

in using our products. At http://support.rockwellautomation.com, you can

find technical manuals, a knowledge base of FAQs, technical and application

notes, sample code and links to software service packs, and a MySupport

feature that you can customize to make the best use of these tools.

For an additional level of technical phone support for installation,

configuration and troubleshooting, we offer TechConnect Support programs.

For more information, contact your local distributor or Rockwell Automation

representative, or visit http://support.rockwellautomation.com.

Installation Assistance

If you experience a problem with a hardware module within the first 24

hours of installation, please review the information that's contained in this

manual. You can also contact a special Customer Support number for initial

help in getting your module up and running:

New Product Satisfaction Return

Rockwell tests all of our products to ensure that they are fully operational

when shipped from the manufacturing facility. However, if your product is

not functioning and needs to be returned:

Software and Firmware Upgrades

To receive software updates (software serial number required) and

firmware upgrades for your terminal:

•call your local Rockwell Automation sales office or distributor

•call Rockwell Software at 1-440-646-7800 or fax 1-440-646-7801

•access www.software.rockwell.com

United States 1.440.646.3223

Monday – Friday, 8am – 5pm EST

Outside United

States Please contact your local Rockwell Automation representative for any

technical support issues.

United States Contact your distributor. You must provide a Customer Support case

number (see phone number above to obtain one) to your distributor in

order to complete the return process.

Outside United

States Please contact your local Rockwell Automation representative for

return procedure.

Otros manuales para PanelView Plus 2711P

Tabla de contenidos

Otros manuales de Terminal táctil de Allen-Bradley

Allen-Bradley

Allen-Bradley PanelView Plus 6 700 Manual de usuario

Allen-Bradley

Allen-Bradley 1770-T1 Manual de usuario

Allen-Bradley

Allen-Bradley PanelView Plus 7 Manual de usuario

Allen-Bradley

Allen-Bradley PanelView C200 Manual de usuario

Allen-Bradley

Allen-Bradley MobileView 2711T-T10R1N1 Manual de usuario

Allen-Bradley

Allen-Bradley 2711-K5A series Manual de usuario

Allen-Bradley

Allen-Bradley FLEX 5000 Manual de usuario

Allen-Bradley

Allen-Bradley PanelView 800 2711R-T4T Manual de usuario

Allen-Bradley

Allen-Bradley PanelView Plus 400 Manual de usuario

Allen-Bradley

Allen-Bradley PanelView 600 Manual de usuario

Allen-Bradley

Allen-Bradley 2711-TBDC Manual de usuario

Allen-Bradley

Allen-Bradley PanelView 1200 Manual de usuario

Allen-Bradley

Allen-Bradley PanelView 2711C-F2M Manual de usuario

Allen-Bradley

Allen-Bradley PanelView Plus 400 Manual de usuario

Allen-Bradley

Allen-Bradley 1797-TB3S Manual de usuario

Allen-Bradley

Allen-Bradley PanelView Plus 2711P Manual de usuario

Allen-Bradley

Allen-Bradley PanelView 800 Manual de usuario

Allen-Bradley

Allen-Bradley 1747-PT1 Manual de usuario

Allen-Bradley

Allen-Bradley 2711-K6C series Manual de usuario

Allen-Bradley

Allen-Bradley C Series Manual de usuario

Allen-Bradley

Allen-Bradley PanelView Plus 7 Manual de usuario

Allen-Bradley

Allen-Bradley PanelView Plus 7 Manual de usuario

Allen-Bradley

Allen-Bradley PanelView 1200 Series Manual de usuario

Allen-Bradley

Allen-Bradley PanelView Plus 6 Manual de usuario

Manuales populares de Terminal táctil de otras marcas

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manual de usuario

Ingenico

Ingenico AXIUM EX4000 Manual de usuario

Heisei Electronics

Heisei Electronics Q-POS 815 Manual de usuario

Amano

Amano MTX-15 Manual de usuario

FLOWBIRD

FLOWBIRD CWT Compact Touch Manual de usuario

Demco

Demco SP7 Manual de usuario

Lathem

Lathem PC600 Series Manual de usuario

Partner

Partner MF-2352 Manual de usuario

NCR

NCR RealPOS 7460-2 Manual

Simrad

Simrad MS50 Instrucciones de montaje

Unitech

Unitech MR350 MKII Guía de inicio rápido

Jungheinrich

Jungheinrich WMT 210 Manual de usuario

Motorola

Motorola MTP850 Manual de usuario

YASKAWA

YASKAWA 62H-MDC0 Manual de usuario

MVG industries

MVG industries NeptuLink Manual de usuario

Price Industries Limited

Price Industries Limited FDC Manual de instrucciones

Honeywell

Honeywell TemaKey Manual de usuario

EBN

EBN BPC65-B-A16G Manual de usuario