Allen-Bradley ArmorBlock Series Manual

Wiring Diagrams

ArmorBlock Dual-Port EtherNet/IP 8-Point

Digital Modules

Catalog Numbers 1732E-IB8M8SOER, 1732E-OB8M8SR, 1732E-8CFGM8R

Parts List

Your package contains one 1732E ArmorBlock™ module and these pinout guide

wiring instructions.

For complete installation instructions, refer to the Module Publication Number

table and visit http://literature.rockwellautomation.com.

Module Publication Number

1732E ArmorBlock Dual Port EtherNet/IP Digital Modules Installation

Instructions

1732E-IN007

ATTENTION: Two sets of mounting holes are used to mount the module

directly to a panel or machine. Mounting holes accommodate #6 (M3) pan

head screws. The torque specification is 0.68 Nm (6 lb-in.).

ATTENTION: To comply with the CE Low Voltage Directive (LVD), this

equipment and all connected I/O must be powered from a source compliant

with the following:

Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).

ATTENTION: To comply with UL restrictions, this equipment must be powered

from a source compliant with the following: Limited Voltage.

ATTENTION: The device meets UL Type 1 Enclosure rating.

2ArmorBlock Dual-Port EtherNet/IP 8-Point Digital Modules

Publication 1732E-WD002C-EN-P - March 2014

I/O Connectors

EtherNet/IP Connector

D-Code M12 Micro Network Female Connector

ATTENTION: Sensors/actuators power should not be supplied externally.

IMPORTANT

Use the 1585D–M4DC–H: Polyamide small body unshielded mating

connectors for the D-Code M12 female network connector.

Note that the distance between the center of each Ethernet connector is

16.2 mm. Rockwell Automation recommends the use of suitable cable

based on this measurement. Some of the recommended cables are

1585D-M4TBJM-x and 1585D-M4TBDM-x for daisychains.

ATTENTION: Make sure all connectors and caps are securely tightened to

properly seal the connections against leaks and maintain IP enclosure type

requirements.

(View into connector)

Pin 1 Sensor source voltage

Pin 3 Return

Pin 4 Input

45383

Pico-style 3-Pin Input Female Connector

45383

(View into connector)

Pin 1 Sensor source voltage

Pin 3 Return

Pin 4 Output

Pico-style 3-Pin Output Female Connector

Pico-style 3-Pin Self-configuring Female Connector

(View into connector)

Pin 1 Sensor source voltage

Pin 3 Return

Pin 4 Input or Output

45383

(View into connector)

Pin 1 Tx+

Pin 2 Rx+

Pin 3 Tx-

Pin 4 Rx-

Pin 5 Shell

44808

ArmorBlock Dual-Port EtherNet/IP 8-Point Digital Modules 3

Publication 1732E-WD002C-EN-P - March 2014

Power Connectors

Micro-style 4-Pin Input Male Receptacle

Specifications

IMPORTANT

Use two twisted pair CAT5E UTP or STP cables.

IMPORTANT

The maximum current that any pin on the power connectors can

carry is 4 A.

Environmental Specifications

Attribute Value

Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold),

IEC 60068-2-2 (Test Bd, Operating Dry Heat),

IEC 60068-2-14 (Test Nb, Operating Thermal Shock):

-20…60 °C (-4…140 °F)

Temperature, ambient, max 60 °C (140 °F)

Voltage, power, max 30V DC

Voltage, power, min 12V DC

Output current 0.5A per output, up to 4A per module

D-Code

M12 Pin

Wire Color Signal 8-way Modular

RJ45 Pin

1 White-orange TX+ 1

2 White-green RX+ 3

3 Orange TX- 2

4 Green RX- 6

45764

(View into receptacle)

Pin 1 Auxiliary power+

Pin 2 Module power+

Pin 3 Module power-

Pin 4 Auxiliary power-

45763

Male Input Female Output

Publication 1732E-WD002C-EN-P - March 2014 PN-245397

Allen-Bradley, Rockwell Automation, ArmorBlock and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Pilot Duty Rating DC-14

Enclosure type rating Meets IP65/66/67/69K

ATTENTION: This equipment is considered Group 1, Class A industrial equipment

according to IEC/CISPR 11. Without appropriate precautions, there may be difficulties

with electromagnetic compatibility in residential and other environments due to

conducted and radiated disturbance.

Certifications

Certification (when

product is marked)(1)

(1) See the Product Certification link at http://www.rockwellautomation.com/products/certification/ for

Declarations of Conformity, Certificates, and other certification details.

Value

c-UR-us UL Recognized Component Industrial Control Equipment, certified for US

and Canada. See UL File E322657.

CE European Union 2004/108/EC EMC Directive, compliant with:

EN 61326-1; Meas./Control/Lab., Industrial Requirements

EN 61000-6-2; Industrial Immunity

EN 61000-6-4; Industrial Emissions

EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)

C-Tick Australian Radiocommunications Act, compliant with:

AS/NZS CISPR 11; Industrial Emissions

EtherNet/IP ODVA conformance tested to Ethernet/IP specifications.

KC Korean Registration of Broadcasting and Communications Equipment,

compliant with:

Article 58-2 of Radio Waves Act, Clause 3

Environmental Specifications

Attribute Value

Otros manuales para ArmorBlock Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Allen-Bradley

Allen-Bradley

Allen-Bradley MSR42 Manual de usuario

Allen-Bradley

Allen-Bradley ControlLogix ControlNet B Series Manual de usuario

Allen-Bradley

Allen-Bradley MicroLogix 1200 Manual de usuario

Allen-Bradley

Allen-Bradley ArmorBlock 1732D A Series Manual de usuario

Allen-Bradley

Allen-Bradley CompactLogix EtherNet/IP 1768-EWEB Manual de usuario

Allen-Bradley

Allen-Bradley FLEX I/O 1794-IV32 Manual de usuario

Allen-Bradley

Allen-Bradley 1794-VHSC Manual de usuario

Allen-Bradley

Allen-Bradley FLEX I/O ControlNet 1794-ACN15 Manual de usuario

Allen-Bradley

Allen-Bradley 1757-ABRIO Manual de usuario

Allen-Bradley

Allen-Bradley SLC 500 DeviceNet Manual de usuario

Allen-Bradley

Allen-Bradley ArmorBlock 1732E Manual

Allen-Bradley

Allen-Bradley DeviceNet 1747-SDN/B Manual de usuario

Allen-Bradley

Allen-Bradley SLC 500 BASIC Manual de usuario

Allen-Bradley

Allen-Bradley ArmorPoint A Series Manual de usuario

Allen-Bradley

Allen-Bradley ArmorBlock Series Manual

Allen-Bradley

Allen-Bradley A Series Manual de usuario

Allen-Bradley

Allen-Bradley 1784-KT/B Guía de instalación y uso

Allen-Bradley

Allen-Bradley E300 Manual de usuario

Allen-Bradley

Allen-Bradley 1771-KA2 Manual de usuario

Allen-Bradley

Allen-Bradley FLEX I/O 1794-ID2 Manual de usuario

Allen-Bradley

Allen-Bradley 1492-CM1771-LD006 Manual de usuario

Allen-Bradley

Allen-Bradley ArmorBlock 1732E Manual de usuario

Allen-Bradley

Allen-Bradley ControlNet 1786-RPFS Manual de usuario

Allen-Bradley

Allen-Bradley ControlNet-to-DeviceNet 1788-CN2DN Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario