Aleratec 260167 Manual de usuario

QUICK START GUIDE

Aleratec

1:2 DVD/CD Copy Cruiser Pro HLX

™

Win/Mac

Part No. 260167

www.aleratec.com

Welcome!

Congratulations on your purchase of an Aleratec 1:2 DVD/CD Copy

Cruiser Pro Win/Mac, considered by industry experts to be one of the

ﬁnest DVD/CD Duplicators and LightScribe Disc Labelers available.

The entire Aleratec team is committed to providing you with courteous

service. Our knowledgeable staff will strive to make owning and

operating your new Aleratec 1:2 DVD/CD Copy Cruiser Pro Win/Mac a

pleasant experience.

This Quick Start Guide will lead you step-by step through the basic

operation procedures of your 1:2 DVD/CD Copy Cruiser Pro Win/Mac.

For more detailed information on conﬁguring and applying your 1:2

DVD/CD Copy Cruiser Pro Win/Mac, please refer to the “Help” tab in the

software included on the Installation CD.

We at Aleratec appreciate your selection of our product, and wish you

great success and enjoyment of your new 1:2 DVD/CD Copy Cruiser

Pro Win/Mac.

Check out Aleratec online!

www.aleratec.com

www.twitter.com/Aleratec

www.youtube.com/Aleratec

Included Items

•1:2 DVD/CD Copy Cruiser Pro Win/Mac

•Power Cord

•USB Cable

•Installation CD

•Quick Start Guide (this document)

•Aleratec Registration Card

NOTE: Please store and track the included software, registration codes

and parts carefully. Requests for replacement software, registration

codes, and/or parts may incur a fee.

www.aleratec.com 1

Product Features

The 1:2 DVD/CD Copy Cruiser Pro Win/Mac is a multiple disc DVD/CD

Duplicator and LightScribe Disc Labeler.

•Fast recording speed for high-volume copying.

•Duplicates up to two DVDs or CDs simultaneously.

•Records up to two DVDs or CDs simultaneously.

•Burns labels on up to two LightScribe discs simultaneously.

•Scalable - Double your capacity to four discs - just plug another

260157 into your PC.

Key Items on the

1:2 DVD/CD Copy Cruiser Pro HLX Win/Mac

Note: Choose a Good Location

1. Allow adequate clearance for moving parts.

2. Do not place near heat sources such as radiators or air ducts, or

in a place subject to direct sunlight, excessive dust, mechanical

vibration or shock.

3. Good care will help assure maximum product life. Improper

operating environment and misuse may void the warranty.

Display

Panel

LightScribe

DVD/CD

Recorders

(2)

Power

Switch

www.aleratec.com

Summary of Operation

Your Aleratec 1:2 DVD/CD Copy Cruiser Pro Win/Mac is equipped with a USB 2.0 port

that is a bridge to both LightScribe DVDRW drives.

Stand Alone Duplicator

1. Power-on your 1:2 DVD/CD Copy Cruiser Pro Win/Mac (do not attach the USB

Cable) and select the Copy function by pressing the arrow buttons. Place the

source disc in the top DVD/CD Recorder. Place a blank disc in the lower DVD/

CD Recorder. After the unit detects the blank disc, press the ENT button to start

copying.

2. When copying is completed, a good disc copy will be ejected automatically. A

failed disc will remain in the DVD/CD Recorder and can be ejected manually.

3. Detailed instructions are included in the 1:2 DVD/CD Copy Cruiser Pro Win/Mac

User Guide included on the Installation CD.

Software Installation

For Mac Users

Mac users please see the Discribe Multiburner Software Quick Start Guide.

For Windows Users

For Windows users, place the Aleratec Disc Publishing Software Suite CD into the DVD/

CD drive in your PC. Install the Acoustica and Roxio software.

Getting Started

Disc Publishing

1. Connect the USB cable (included) to the USB port on the back of your duplicator

and to an empty USB port on your computer.

2. Power on your 1:2 DVD/CD Copy Cruiser Pro Win/Mac. The display should show:

If you do not see this display, refer to the USB section of the User Guide.

USB L.H. Mode

D1 Mult D2 Mult

www.aleratec.com 3

Simultaneous LightScribe Disc Labeling

Please install the Acoustica disc labeling software from the included software CD. For

best results, Aleratec Duplicator Grade LightScribe Media is recommended. See specic

information at the back of this Quick Start Guide.

1. Launch the DVD/CD Label Maker from the Acoustica program group in your Start

menu.

2. When the program rst starts, you will be presented with the “new label” wizard.

Click on the “Cancel” button to close the wizard and you will see the label design

workspace.

If you have already designed a label you wish to use, select the saved project from

the “File > Open” dialog box and skip to step 6.

3. To design a new label, choose the appropriate mode from the drop-down box

shown. “Full Mode” allows you to use the maximum area of the disc for your label.

www.aleratec.com

Getting Started - continued

4. You may use one of the included backgrounds (Backgrounds tab) or you may

use any other image you may have as a background (“Art Browse” tab).

5. Add text to the label using the “Text” tool, and basic shapes can be added with

“Shape.”

6. When you are ready to begin labeling, click on the “LightScribe” button.

7. Click to place a check mark next to each recorder that will be used for labeling.

Choose the desired print quality (the “Best” setting yields the highest contrast).

Press “Print” to continue.

www.aleratec.com 5

8. Insert discs into each of the recorders you wish to use, with the label side facing

down (shiny side facing up) and then click “OK.” The LightScribe process will

begin on each selected recorder.

9. Acoustica will display the status of the job with a progress bar corresponding to

each recorder. When the job has completed successfully, the labeled discs will

be will ejected automatically.

Note: If you have any questions about your Aleratec publishing system, please

consult our on-line Knowledge Base at: http://www.aleratec.com.

www.aleratec.com

Getting Started - continued

Simultaneous DVD/CD Duplication Instructions

The 1:2 DVD/CD Copy Cruiser Pro Win/Mac can be used to make two copies directly

from an unprotected disc. These instructions assume your computer’s internal DVD/

CD drive will be used to read the source disc.

1. Launch Roxio Creator from the Roxio program group in your Start menu.

2. Click on the “Home” button to the left, and then choose “Applications” below.

3. From the list of applications, click on “Disc Copier” to start this component.

4. When Disc Copier opens, select from the options in the “Source” drop-down

box to choose the drive you will use to read the source disc. If you have not

already inserted the disc you want to copy into the appropriate tray, do so now

and it will be recognized in a few moments.

www.aleratec.com 7

5. Click on the down arrow to the right of the “Copy Now” button, and choose

“Advanced Copy.”

6. In the Burn Setup window that appears, click to place a check in the box next to

the recorders you want to use to copy. Make sure the drive containing the source

disc is not selected.

www.aleratec.com

Getting Started - continued

7. (Optional) Adjust the “Write Speed” setting from the Burn Options section to a

suitable speed.

Note: Lower write speeds will reduce the chance of playback difﬁculties when

creating audio CDs or DVDs for home playback.

8. Click “OK” when you are ready to begin duplication.

9. Roxio Disc Copier will display the progress of the duplication job and will notify

you when the task has been completed successfully.

Otros manuales para 260167

Tabla de contenidos

Otros manuales de Duplicadora de discos de Aleratec

Aleratec

Aleratec DVD/CD Flash Copy Tower Manual de usuario

Aleratec

Aleratec 330119 Manual de usuario

Aleratec

Aleratec 260170 Manual de usuario

Aleratec

Aleratec 1:5 HDD Cruiser 350104 Manual de usuario

Aleratec

Aleratec 260155 Manual de usuario

Aleratec

Aleratec 1:7 DVD/CD Tower Publisher SL Manual de usuario

Aleratec

Aleratec 260167 Manual de usuario

Aleratec

Aleratec Tower Publisher SLS 260202 Manual de usuario

Aleratec

Aleratec PortaCruiser 350108 Manual de usuario

Aleratec

Aleratec 280110 Manual de usuario

Aleratec

Aleratec 260205 Manual de usuario

Aleratec

Aleratec 260206 Manual de usuario

Aleratec

Aleratec 330106 Manual de usuario

Aleratec

Aleratec 1:5 HDD Cruiser 350104 Manual de usuario

Aleratec

Aleratec 1:5 HDD Copy Cruiser IDE/SATA 350112 Manual de usuario

Aleratec

Aleratec 1:3 Copy Cruiser BLU HLX Manual de usuario

Aleratec

Aleratec 1:3 DVD/CD Copy Tower Pro HS Manual de usuario

Aleratec

Aleratec 350109 Manual de usuario

Aleratec

Aleratec 350117 Manual de usuario

Aleratec

Aleratec 350115 Manual de usuario

Aleratec

Aleratec Tower Publisher SLS 260202 Manual de usuario

Aleratec

Aleratec 1:27 USB Copy Tower SA Manual de usuario

Aleratec

Aleratec 330113 Manual de usuario

Aleratec

Aleratec 330120 Manual de usuario

Manuales populares de Duplicadora de discos de otras marcas

Riso

Riso CV Series Manual

MicroBoards Technology

MicroBoards Technology GX-2 Manual de usuario

Addonics Technologies

Addonics Technologies HDUS325DX Manual de usuario

Carry

Carry Pro118 Manual de usuario

CopyPro

CopyPro PowerPro II Manual de usuario

Primera

Primera Max Manual de usuario

Logicube

Logicube EchoPlus-NG Manual de usuario

Silca

Silca Delta 2000 SA Manual de usuario

Reflex7

Reflex7 Daisy Chain Series Manual de usuario

Vinpower Digital

Vinpower Digital SharkCopier DC Manual de usuario

Codonics

Codonics Virtua E Manual de usuario

Octave

Octave Copy Master II Manual de usuario

Kanguru

Kanguru U2-DVDDUPE-S Manual de usuario

StarTech.com

StarTech.com 8STSATDUP11 Manual de usuario

DUPLO SEIKO CORPORATION

DUPLO SEIKO CORPORATION Duprinter DP-460 Manual de usuario

Addonics Technologies

Addonics Technologies UDFH7 Manual de usuario

Vinpower Digital

Vinpower Digital MiniLoader VDX-1 Manual de usuario

Addonics Technologies

Addonics Technologies CFASTD5 Manual de usuario