Alcatel-Lucent OmniAccess 4504 Manual de usuario

OmniAccess 4504, 4604,

and 4704 WLAN Switch

Installation Guide

www.alcatel-lucent.com

26801 West Agoura Road

Calabasas, CA 91301

OmniAccess 4504, 4604, and 4704 WLAN Switch | Installation Guide 0510353-01 | December 2007

Specifications in this manual are subject to change without notice.

Originated in the USA.

Trademarks

AOS-W, Alcatel 4308, Alcatel 4324, Alcatel 6000, Alcatel 41, Alcatel 60/61/65, Alcatel 70, and Alcatel 80 are trademarks of Alcatel-

Lucent in the United States and certain other countries.

Any other trademarks appearing in this manual are the property of their respective companies.

Legal Notice

The use of Alcatel-Lucent switching platforms and software, by all individuals or corporations, to terminate Cisco or Nortel VPN client

devices constitutes complete acceptance of liability by that individual or corporation for this action and indemnifies, in full, Alcatel-

Lucent from any and all legal actions that might be taken against it with respect to infringement of copyright on behalf of Cisco Systems

or Nortel Networks."

OmniAccess 4504, 4604, and 4704 WLAN Switch | Installation Guide Contents | 3

Contents

Preface Guide Overview 5

Related Documents

The following documents are referred to in this guide and are considered components of the complete

documentation set needed for successful installation and management of an OmniAccess WLAN

Switch:

AOS-W Quick Start Guide

AOS-W User Guide

OmniVista Mobility Manager User Guide

Contacting Alcatel-Lucent

Web Site Support

Main Site http://www.alcatel-lucent.com/wps/portal/enterprise

Support Site https://service.esd.alcatel-lucent.com

Support Email support@ind.alcatel.com

Telephone Support

North America 1-800-995-2696

Latin America 1-877-919-9526

Europe +33 (0) 38 855 6929

Asia Pacific +65 6240 8484

Worldwide 1-818-878-4507

6| Preface OmniAccess 4504, 4604, and 4704 WLAN Switch | Installation Guide

OmniAccess 4504, 4604, and 4704 WLAN Switch | Installation Guide Hardware Overview | 7

Chapter 1

Hardware Overview

About the OmniAccess 4504, 4604, and 4704

The OmniAccess 4504, 4604, and 4704 are enterprise-class, wireless LAN switches. These switches

connect, control, and intelligently integrate wireless Access Points (APs) and Air Monitors (AMs) into a

wired LAN system.

Available base models:

zOmniAccess 4504 (OAW-4504)

The OAW-4504 is capable of supporting up to 32 campus connected APs. The following base models

are available and can be upgraded by purchasing optional software licenses:

OAW-4504-0: no built-in AP support; optional Alcatel-Lucent AP upgrade licenses available.

OAW-4504-8: includes built-in campus connected AP support of up to 8 APs; additional Alcatel-

Lucent AP upgrade licenses available.

zOmniAccess 4604 (OAW-4604)

The OAW-4604 is capable of supporting up to 64 campus connected APs. The following base models

are available and can be upgraded by purchasing optional software licenses:

OAW-4604-0: no built-in AP support; optional Alcatel-Lucent AP upgrade licenses available.

OAW-4604-32: includes built-in campus connected AP support of up to 32 APs; additional Alcatel-

Lucent AP upgrade licenses available.

zOmniAccess 4704 (OAW-4704)

The OAW-4704 is capable of supporting up to 128 campus connected APs. The following base

models are available and can be upgraded by purchasing optional software licenses:

OAW-4704-0: no built-in AP support; optional Alcatel-Lucent AP upgrade licenses available.

OAW-4704-64: includes built-in campus connected AP support of up to 64 APs; additional Alcatel-

Lucent AP upgrade licenses available.

NOTE

Feature related AP licenses are counted independently and in addition to the Alcatel-Lucent AP

upgrade licenses. Contact your Alcatel-Lucent sales representative for complete details regarding

software licensing options and support capacity.

8| Hardware Overview OmniAccess 4504, 4604, and 4704 WLAN Switch | Installation Guide

Minimum Software Requirements

The OmniAccess 4504, 4604, and 4704 require AOS-W 3.2.0 or later.

AOS-W software builds prior to version 3.2.0 do not support the OmniAccess 4504, 4604, and 4704. If

your network currently runs on a software build prior to 3.2.0, you must upgrade the software on your

master and local switches to 3.2.0 or later prior to installing an OmniAccess 4504, 4604, or 4704 WLAN

Switch in your existing network.

Package Checklist

zOmniAccess 4504, 4604, or 4704 WLAN Switch

zAC Power Cord (country-specific)

zRack Mount Brackets with Hardware (for rack mounting)

zFlat Serial Cable (RJ-45)

zRubber Feet (for table top deployments)

zSerial Console Port Adaptor (RJ-45 to DB9)

zAOS-W Software Documentation CD

AOS-W Quick Start Guide

zEnd User License Agreement (EULA)

Hardware Model Overview

NOTE

The master switch, its redundant master switch, and all of its local switches must run on the same

code of AOS-W. Once you upgrade your network and install an OmniAccess 4504, 4604, or 4704

WLAN Switch into your network, verify that the software version on your switch matches the rest of

the network. If the code shipped on the switch is prior to the version that you upgraded your

network to, you must upgrade the code on the switch to match the rest of the network.

NOTE

Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the

carton, including the original packing materials. Use these materials to repack and return the unit to

the supplier if needed.

NOTE

Optional accessories, such as SFP modules, are available for use with an OmniAccess 4504, 4604,

or 4704 and are sold separately. Contact your Alcatel-Lucent sales representative for details and

assistance.

NOTE

The physical hardware overview covers all three switches: the OmniAccess 4504, 4604, and 4704 .

The difference between the three switch models is dependent on the licensing level purchased,

which is covered in About the OmniAccess 4504, 4604, and 4704 on page 7. The switch model

depicted in the illustrations throughout this section is the OAW-4504.

OmniAccess 4504, 4604, and 4704 WLAN Switch | Installation Guide Hardware Overview | 9

Front View

Figure 1 OmniAccess 4504, 4604, and 4704 Front View

1000Base-X (SFP) Ports

There are four 1000Base-X combination ports for fiber connectivity only and are intended for use with

Alcatel-Lucent SFPs (mini-GBICs).

To purchase compatible SFP modules, contact your Alcatel-Lucent sales representative for details and

assistance.

10/100/1000Base-T Gigabit Ethernet Ports

There are four 10/100/1000Base-T Gigabit Ethernet (RJ-45) ports. Gigabit Ethernet uses all eight wires

and each pair is used in a bi-directional fashion, meaning the same pairs are used for both data

transmission and reception. Figure 2 illustrates the CAT-5 pin-out found on an RJ-45 connector. The

CAT-5 pin-out pairs the following pins on a 10/100/1000Base-T Gigabit Ethernet port: 1/2, 3/6, 4/5, and 7/

Serial Console Port

10/100/1000-Base-T

Gigabit Ethernet Port

1000Base-X (SFP)

Ports

Dual-media ports (4x); 1000Base-X

or 10/100/1000Base-T

NOTE

Ports zero through three are dual-media ports and can utilize either the 1000Base-X or 10/100/

1000Base-T connections provided. However, the 1000Base-X fiber connection has priority over the

10/100/1000Base-T copper connection. If a link is detected for the 1000Base-X interface, the 10/

100/1000Base-T connection will be disabled.

NOTE

Alcatel-Lucent tests and supports Alcatel-Lucent optics within their switch systems. Third party

optics are not tested or supported; therefore, Alcatel-Lucent does not guarantee proper functionality

of third party optics when used in an Alcatel-Lucent system.

10 | Hardware Overview OmniAccess 4504, 4604, and 4704 WLAN Switch | Installation Guide

Figure 2 Gigabit Ethernet Port Pin-Out

Serial Console Port

A serial console port is provided for connection to a terminal, allowing for direct local management.

The port’s RJ-45 female connector accepts an RS-232 serial cable with a male connector.

Figure 3 Serial Console Port Pin-Out

Communication settings for the serial console port are indicated in Table 1.

Serial Console Port Adaptor

A modular adaptor can be used to convert the RJ-45 (female) connector to a DB9 (male) connector.

Refer to Figure 4 for complete details.

Figure 4 RJ-45 (female) to DB9 (male) Modular Adaptor Conversion

Table 1 Console Terminal Settings

Baud Rate Data Bits Parity Stop Bits Flow Control

9600 8 None 1 None

1000Base-T Gigabit

Ethernet Port

RJ-45 Female

Pin-Out

Signal Name

BI_DC+

BI_DC-

BI_DD+

BI_DD-

BI_DA+

BI_DA-

BI_DB+

BI_DB-

Function

Bi-directional pair +C

Bi-directional pair -C

Bi-directional pair +D

Bi-directional pair -D

Bi-directional pair +A

Bi-directional pair -A

Bi-directional pair +B

Bi-directional pair -B

Serial

Console Port

TxD

GND

RxD

RJ-45 Female

Pin-Out

Direction

Input

Output

GND

CAUTION

Do not connect an Access Point (AP) to the serial console port. The serial console port is compatible

with only RS-232 devices. Non-RS-232 devices, such as APs, are not supported.

RJ-45 DB-9

Internal

Connections

TxD

GND

RxD

TxD

GND

RxD

RJ-45 Female

Pin-Out

Direction

Input

Output

DB-9 Male

Pin-Out

TxD

RxD

Ground

Direction

Input

Output

Otros manuales para OmniAccess 4504

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Alcatel-Lucent

Alcatel-Lucent

Alcatel-Lucent Service Aggregation Router 7705 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 1850 TSS-320 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 Manual de programación

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6250 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 1830 Guía del usuario

Alcatel-Lucent

Alcatel-Lucent 1675 LambdaUnite Guía del usuario

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 9800E Manual de instalación

Alcatel-Lucent

Alcatel-Lucent 7670 RSP Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 1850 TSS-100 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 8340 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 1850 TSS-320 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6250 Manual de programación

Alcatel-Lucent

Alcatel-Lucent 7210 SAS-X Manual de usuario

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6850-48 Manual de programación

Alcatel-Lucent

Alcatel-Lucent 7210 SAS-T Manual de usuario

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 10K Manual de usuario

Alcatel-Lucent

Alcatel-Lucent LambdaUnite 1675 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent OmniSwitch OS6450-10 Manual de instalación

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6350 Manual de instalación

Alcatel-Lucent

Alcatel-Lucent OmniStack LS 6224P Manual de usuario

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6350 Manual de instalación

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6900 Manual de instalación

Alcatel-Lucent

Alcatel-Lucent OmniSwitch 6865-P16X Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 1850 TSS-320 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manual de usuario