AKG C 518 M Manual de usuario

BEDIENUNGSANLEITUNG . . . . . . . . . .S. 2

Bitte vor Inbetriebnahme des Gerätes lesen!

USER INSTRUCTIONS . . . . . . . . . . . . . . .p. 12

Please read the manual before using the equipment!

MODE D’EMPLOI . . . . . . . . . . . . . . . . . . . . .p. 22

Veuillez lire cette notice avant d’utiliser le système!

ISTRUZIONI PER L’USO . . . . . . . . . . . . .p. 32

Prima di utilizzare l’apparecchio, leggere il manuale!

MODO DE EMPLEO . . . . . . . . . . . . . . . . . . .p. 42

¡Sirvase leer el manual antes de utilizar el equipo!

INSTRUÇÕES DE USO . . . . . . . . . . . . . . .S. 52

Favor leia este manual antes de usar o equipamento!

C518 M

C518 ML

12 AKG C 518 M / C 518 ML

Table of Contents

Page

1 Precaution/Description ...........................13

1.1 Precaution..................................13

1.2 Unpacking..................................13

1.3 Optional Accessories .........................13

1.4 Brief Description .............................13

1.5C518M....................................14

1.6C518ML...................................14

2 Interfacing ......................................15

2.1 Introduction.................................15

2.2C518M....................................15

2.3C518ML...................................15

2.3.1 B 29 L or MPA V L........................15

2.3.2 Connecting to a Bodypack Transmitter .......16

3 Using Your Microphone ...........................18

3.1 Mounting the Microphone......................18

3.2 Aligning the Microphone .......................18

3.3MoreHints..................................18

4 Cleaning........................................19

5 Troubleshooting .................................20

6 Speciﬁcations ...................................21

1.1 Precaution

1.2 Unpacking

1.3 Optional

Accessories

1.4 Brief

Description

Referto fig.1on

page 14.

Please make sure that the piece ofequipment

your microphone will be connectedto fulﬁlls the

safetyregulations in force in your country and is

ﬁttedwitha ground lead.

Checkthat the packaging contains all ofthe com-

ponents listedabove.Should anything be miss-

ing, please contact your AKG dealer.

•Visit www.akg.comorreferto the latest

MicroMic brochure.

•C518 ML: B 29 Lbattery powersupply

1Cardioid microphone forhighgain before feed-

back. Frequencyresponse tailoredto drum

miking.

2Shockmount reduces handling and cable

noise.

350-mm (2-in.) gooseneckforaccurate micro-

phone alignment.

4Swiveljoint (135°).

AKG C518 M/C 518 ML

1 Precaution/ Description

1 x C 518 1 x W 44

1 x A 518

stabilizer knee

1x mini XLR to

standard XLR

connecting ca-

ble (10 ft./3 m)

1x mini XLR to

mini XLR con-

necting cable

(5 ft./1.5 m)

1x A400 adap-

terforPT 40 or

PT 400 body-

packtransmitter

C 518 Monly C 518 ML only

1.5C518M

1.6C518ML

5Mini XLRoutput socket for connecting cable.

6Mounting plate for the A 400 adapter allowing

you to attach a PT 40 or PT 400 bodypack

transmitter.

7Knurled-head screw for opening and tighten-

ing the clamp jaws (8).

8Clamp jaws for ﬁxing the microphone on the

top hoop.

Fig. 1:C 518 M/C 518 ML microphone

•For9to52Vuniversal phantom power.

•10-ft. (3-m)plug-in connecting cable with

phantom power adapter with integrated 3-pin

XLRconnector and switchable bass rolloff (9)

(-4 dB at 100 Hz).

Fig. 1a:Phantom power adapter with bass rolloff

switch (9).

•For use with the B 29 L battery power supply,

MPA V L phantom power adapter, or PT 40 or

PT 400 transmitters.

•5-ft. (1.5-m)plug-in connecting cable with 3-

pin mini XLRconnectors.

•A 400 adapter for attaching a PT 40 or PT 400

bodypack transmitter.

14 AKG C 518 M / C 518 ML

1Description



















2.1 Introduction

Important!

2.2C518M

Refer to ﬁg. 1.

2.3C518ML

2.3.1 B 29 L

or MPA V L

Disconnecting

the cable:

Important!

The C 518 M/C 518 ML is a condenser micro-

phone and therefore needs a power supply.

Usingany power supply other than those

recommendedby AKG may damageyour

microphone andwill voidthe warranty.

1. Use the supplied connecting cable to connect

the output socket (5)on the gooseneck to a

balanced XLRmicrophone input with phantom

power.

2. Switch the phantom power on. (Refer to the in-

struction manual of the unit to which you con-

nected your microphone.)

1. Use the supplied connecting cable to connect

the output socket (4)on the gooseneck to one

of the two mini XLRsockets on the B 29 L or

the mini XLRsocket on the connecting cable of

the MPA V L.

The connector will lock automatically.

•To disconnect the cable, press the unlocking

button on the mini XLRconnector (1)and pull

the connector (1)out of the socket.

•To avoiddamaging the cable, never pull

at the cableitself!

2. B29L:Connect the B 29 L to the desired input.

MPA V L: Connect the MPA V L to a balanced

XLRmicrophone input with phantom power

and switch the phantom power on.

AKG C 518 M / C 518 ML

2 Interfacing

2.3.2 Connecting

to a Bodypack

Transmitter

Note:

Attaching the

Bodypack Trans-

mitter to the Mi-

crophone:

Fig. 2:Inserting the

transmitter into the

adapter.

Refer to ﬁg. 2.

•Use the supplied connecting cable to connect

the output socket on the gooseneck to the in-

put socket on the bodypack transmitter.

•You can attach the bodypack transmitter to

your belt or to the instrument. The PT 40 and

PT 400 bodypack transmitters will also mount

directly on the microphone (see below).

1. Pull the ends of the ﬁxing clip (1)out of the

adapter.

2. Slide the transmitter (2)all the way into the

adapter.

3. Reinsert the ends of the ﬁxing clip (1)into the

openings in the adapter. The ends of the ﬁxing

clip engage the locating holes in the transmit-

ter case to hold the transmitter in place.

16 AKG C 518 M / C 518 ML

2 Interfacing





321



Fig. 3:Mounting

the adapter and

transmitter on the

microphone.

Refer to ﬁg. 3.

Fig. 4:Coiling and

stowing the con-

necting cable.

Refer to ﬁg. 4.

4. Slide the adapter with the transmitter on the

shaft (3)on the mounting plate (4).

5. Press the adapter against the mounting plate

(4). The adapter will lock with an audible click.

6. Coil the connecting cable and stow it beneath

the ﬁxing clip.

AKG C 518 M / C 518 ML

2 Interfacing





3.1 Mounting the

Microphone

Fig. 5:Fixing the

microphone on a

snare drum, tom-

tom, or Roto tom.

Refer to ﬁg. 5.

3.2Aligning the

Microphone

3.3MoreHints

C 518 M only!

1. Turn the knurled-head screw (1)CCW to open

the clamp jaws (2).

2. Hang the microphone on the top hoop of the

drum.

3. Tighten the knurled-head screw (1)CW.

•To get a tight, punchy sound, aim the micro-

phone at the perimeter of the skin.

•To get a rounder, more open sound, aim the mi-

crophone at the center of the skin.

•To get a very dry sound, you can tape a strip of

felt or a piece of tissue paper to the skin in an

off-center position.

•When miking up small-diameter drums, we

recommend aiming the microphone at the

perimeter of the top skin to keep the micro-

phone clear of the sticks.

•To keep the ringing of the top skin from becom-

ing audible, you can switch in the bass rolloff

on the phantom power adapter.

18 AKG C 518 M / C 518 ML

12 3





3UsingYour Microphone

Fig. 6:Stabilizer

knee:a)horizontal,

b)vertical orienta-

tion.

Refer to ﬁg. 6.

•To prevent the gooseneck (1)from straighten-

ing after you bent it, you may snap the stabi-

lizer knee (2)on the gooseneck in a horizontal

(a)or vertical (b)position.

To clean the microphone case, use a soft cloth

moistened with water.

AKG C 518 M / C 518 ML

3UsingYour Microphone

4 Cleaning

a





20 AKG C 518 M / C 518 ML

5Troubleshooting

Problem PossibleCauseRemedy

No sound:1. Power to mixer

and/or ampliﬁer is off.

2. Channel or master

fader on mixer, or vol-

ume control on am-

pliﬁer is at zero.

3. Microphone is not

connected to mixer

or ampliﬁer.

4. Cable connectors are

seated loosely.

5. Cable is defective.

6. No supply voltage.

1. Switch power to

mixer or ampliﬁer on.

2. Set channel or mas-

ter fader on mixer or

volume control on

ampliﬁer to desired

level.

3. Connect microphone

to mixer or ampliﬁer.

4. Check cable connec-

tors for secure seat.

Check cable and re-

place if damaged.

6. Switch phantom

power on.

Phantom power sup-

ply:connect to power

outlet or insert bat-

tery

(batteries).

Check cable and re-

place if necessary.

Distortion:1. Gain control on the

mixer set too high.

2. Mixer input sensitivity

too high.

1. Turn gain control

down CCW.

2. Connect a 10-dB

preattenuation pad

between microphone

cable and input.

C 518 ML: Also read the transmitter and receiver manuals!

Otros manuales para C 518 M

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Micrófono de otras marcas

IK Multimedia

IK Multimedia iRig Stream MIC PRO Manual de usuario

DAPAudio

DAPAudio RM-101 Manual de usuario

Sennheiser

Sennheiser evolution wireless series EM 100 Manual de usuario

Sony

Sony C-48 Manual de usuario

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Manual de usuario

Shure

Shure WH30TQG Manual de usuario

auna PRO

auna PRO MIC-900 Manual de usuario

Shure

Shure KSM141 Manual de usuario

MAIIN SOUND

MAIIN SOUND IIN style Manual de usuario

Earthworks

Earthworks TC25 Manual de usuario

Sennheiser

Sennheiser evolution D1 Manual de usuario

Alesis

Alesis MicLink Wireless Manual de usuario

DSPPA

DSPPA D6234 Manual de usuario

Monacor

Monacor IMG STAGELINE ECM-300B Manual de usuario

Ansr Audio

Ansr Audio Scan16 Manual de usuario

Shure

Shure MXA710 Series Manual de usuario

JLab

JLab GO TALK Manual de usuario

Renkforce

Renkforce TY-109 Manual de usuario