Agilent Technologies N9360A Manual del propietario

Agilent Technologies

Agilent N9360A

Multi UE Tester

W-CDMA Programming

Manual

Notices

No part of this manual may be repro-

duced in any form or by any means

(including electronic storage and

retrieval or translation into a foreign

language) without prior agreement

and written consent from Agilent

Technologies, Inc. as governed by

United States and international copy-

right laws.

Manual Part Number

N9360-90703

Edition

First Edition, May 2006

Printed in Malaysia

Agilent Technologies Microwave

Products (Malaysia) Sdn. Bhd.

Bayan Lepas Free Industrial Zone

11900 Penang, Malaysia

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the

maximum extent permitted by appli-

cable law, Agilent disclaims all war-

ranties, either express or implied,

with regard to this manual and any

information contained herein, includ-

ing but not limited to the implied

warranties of merchantability and fit-

ness for a particular purpose. Agilent

shall not be liable for errors or for

incidental or consequential damages

in connection with the furnishing,

use, or performance of this document

or of any information contained

herein. Should Agilent and the user

have a separate written agreement

with warranty terms covering the

material in this document that con-

flict with these terms, the warranty

terms in the separate agreement

shall control.

Technology Licenses

The hardware and/or software described

in this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of

a U.S. Government prime contract or sub-

contract, Software is delivered and

licensed as “Commercial computer soft-

ware” as defined in DFAR 252.227-7014

defined in FAR 2.101(a) or as “Restricted

computer software” as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause. Use,

duplication or disclosure of Software is

subject to Agilent Technologies’ standard

commercial license terms, and non-DOD

Departments and Agencies of the U.S.

Government will receive no greater than

Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S. Govern-

ment users will receive no greater than

Limited Rights as defined in FAR 52.227-14

(June 1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any

technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

N9360A Multi UE Tester W-CDMA Programming Manual 1-3

Preface

Thank-you for purchasing the Agilent N9360A. GSM (Global System for

Mobile Communication) option. This is the GSM software for the N9360A

Multi UE Tester.

•Before using the tester, the user is advised to read this manual

carefully to ensure correct usage and also to fully utilize the tester

capability.

•This manual is a reference document and the user is advised to keep it

carefully for future reference.

•The manual includes the characteristics of GSM, the tester operation,

test procedures and screen references.

•Refer to the N9360A Multi UE Tester Installation Guide for information

regarding installation and details of the tester. Refer also to the

N9360A W-CDMA Programming Manual for information about the test

functions of W-CDMA (Wideband Code Division Multiple Access).

Notation

The following notations are used in this manual:

•Example: indicates a command

•[Example] : indicates a screen name

•Tester/tester : indicates the N9360A Multi UE Tester.

Notices

•The information contained in this manual is subjected to change with

notice.

•No part of this manual may be reproduced either mechanically,

electronically or otherwise, without permission from Agilent

Technologies, Inc.

Trademarks

•Ethernet is the registered trademark of the Xerox Corporation.

•EPSON is the registered trademark of the EPSON Corporation.

•Other product names and companies used herein are trademarks or

registered trademarks of their respective companies or Agilent

Technologies, Inc. For registered trademarks, the trademarks symbols

® and ™ are omitted in this manual.

1-4 N9360A Multi UE Tester W-CDMA Programming Manual

THIS PAGE IS INTENTIONALLY LEFT BLANK

N9360A Multi UE Tester W-CDMA Programming Manual 5

Contents

Preface 1-3

Notation 1-3

Notices 1-3

Trademarks 1-3

1 Legal Information

Legal Information 1-2

Warranty 1-2

Technology Licenses 1-2

Restricted Rights Legend 1-2

Service And Support 1-3

Agilent On The Web 1-3

Agilent By Phone 1-3

2 Caution and Safety Requirements

Safety Information 2-2

Safety Summary 2-2

Safety Notices 2-2

Warning Label 2-2

General 2-3

When Operating The Tester 2-3

3 Preparing for Use

Equipment for Automated Test System 3-2

Ethernet 3-2

GP-IB(Option) 3-2

RS-232C (Option) 3-3

Connecting to Controller 3-5

Ethernet 3-5

GP-IB 3-5

RS-232C 3-5

4 Programming Command Guidelines

Getting Started with Programming Commands 4-2

Understanding Common Terms 4-2

Standard Notation 4-2

Command Syntax 4-3

Overview of the Ethernet Interface 4-4

Overview of the GP-IB Interface 4-6

Overview of the RS-232C Serial Interface 4-7

6 N9360A Multi UE Tester W-CDMA Programming Manual

Programming Guidelines 4-10

Typical Programming Flow for the Tester 4-10

Using the Status Registers 4-13

Why Would You Use the Status Registers? 4-13

Status Register System 4-14

Error Messages 4-19

5 Programming Command Reference

IEEE Common Commands 5-2

IEEE Common Commands Reference 5-2

Top Menu Commands 5-5

System Commands 5-5

Display Commands 5-5

Application Select Commands 5-7

Configuration Screen Commands 5-7

DISPlay Subsystem 5-10

DISPlay Subsystem Command Reference 5-10

Command Reference Test Screens 5-11

Command Reference for Configuration Screens 5-11

CONFigure Subsystem 5-13

CONFigure Subsystem Command Reference 5-13

Command Reference for Configuration : Test Sequence Screen 5-16

Command Reference for Configuration: Test Condition Screen 5-28

Command Reference for File Management Screen 5-37

TESTs Subsystem for Automatic Test 5-39

Command Reference for Stand-by/Measuring Screens 5-39

Command Reference for Test Result (Signaling and RF Test) 5-41

Command Reference for RF Test Result 5-43

TESTs Subsystem for Manual Test 5-49

Command Reference for [Stand-by] Screens 5-49

Command Reference for Signaling Test 5-56

Command Reference for Manual Test Result 5-59

Command Reference for MS Information 5-61

Command Reference for SMS Screen 5-62

TX Analyzer Subsystem 5-63

Command Reference for Stand-by / Measuring Screens 5-63

Signal Generator Subsystem 5-72

RFGenerator Subsystem Command Reference 5-72

HCOPy Subsystem 5-76

HCOPy Subsystem Command Reference 5-76

SYSTem Subsystem 5-76

N9360A Multi UE Tester W-CDMA Programming Manual 7

SYSTem Subsystem Command Reference 5-76

Trigger Subsystem 5-78

Trigger Subsystem Command Reference 5-78

6 Programming Command Summary

Top Menu Commands 6-2

Display Screen 6-3

Configuration Screen 6-4

System Configuration Screen 6-4

Test Sequence : Test Sequence Screen 6-5

Configuration : Test Condition Screen 6-8

File Management Screens 6-10

Automatic Test Screens 6-11

Stand-by/Measuring Screens 6-11

Test Result 6-11

MS Information Screen 6-13

Manual Test Screens 6-14

Stand-by Screens 6-14

Measuring Screens 6-15

Test Result 6-15

MS Information Screen 6-16

SMS Screen 6-16

TX Analyzer Screens 6-17

Stand-by Screens 6-17

After Measure Screens 6-18

Signal Generator Screen 6-18

Print Screen Function 6-19

System Control Function 6-19

Trigger Subsystem 6-19

7 Sample Program

Components of Screen 7-2

Functions 7-4

Status display functions 7-4

Sent and Received Data Functions 7-5

Test Event 7-5

Automatic Test Function 7-6

Manual Test Function 7-10

TX Analyzer Function 7-14

8SyntaxDiagrams

Graphical Conversions 8-2

Syntax Diagrams 8-2

8 N9360A Multi UE Tester W-CDMA Programming Manual

THIS PAGE IS INTENTIONALLY LEFT BLANK

N9360A Multi UE Tester W-CDMA Programming Manual 5

List of Tables

1 Legal Information

Table 1-1. Agilent Call Centers and Regional Headquarters 1-3

4 Programming Command Guidelines

Table 4-1. Ethernet Configuration 4-4

Table 4-2. GP-IB Configuration 4-6

Table 4-3. Serial Port Configuration 4-8

Table 4-4. Status Byte Register 4-16

Table 4-5. Status Byte Register 4-17

Table 4-6. Error Messages 4-19

5 Programming Command Reference

Table 5-1. RFCH Allowable Range and Preset Value 5-20

Table 5-2. 5-32

Table 5-1. RFCH Allowable Range and Preset Value 5-40

Table 5-2. RFCH Allowable range and Preset Value 5-50

Table 5-3. Band and RFCH Allowable Range 5-50

Table 5-4. Frequency Allowable Range and Preset Value 5-51

Table 5-5. Band and Frequency Allowable Range 5-51

Table 5-6. Power Control Level Parameter and Preset Value (for Stand-by) 5-53

Table 5-7. Power Control Level Parameter and Preset Value (for Connection) 5-53

Table 5-8. Power Control Level Parameter and Preset Value (for Connection)

(continued) 5-53

Table 5-9. RFCH Allowable Range and Preset Value 5-64

Table 5-10. Band and RFCH Allowable Range 5-64

Table 5-11. Frequency Allowable Range and Preset Value 5-65

Table 5-12. Band and Frequency Allowable range 5-65

Table 5-13. RFCH Allowable Range and Preset Value 5-72

Table 5-14. Band and RFCH Allowable Range 5-73

Table 5-15. Frequency Allowable Range and Preset Value 5-73

Table 5-16. Frequency Allowable Range and Preset Value 5-74

Table 5-17. Channel Softkey Memory Allowable Range and Preset Value 5-77

Table 5-18. BS Level Softkey Memory Allowable Range and Preset Value 5-77

6 Programming Command Summary

Table 6-1. IEEE Common Command Summary 6-2

Table 6-2. Top Menu Command Summary 6-2

Table 6-3. DISPlay Subsystem Command Summary 6-3

Table 6-4. CONFigure Subsystem Command Summary 6-4

Table 6-5. SEQuence Command Summary 6-5

Table 6-6. CONDition Command Summary 6-8

6 N9360A Multi UE Tester W-CDMA Programming Manual

Table 6-7. FILE Command Summary 6-10

Table 6-8. Stand-by / Measuring Screen Command Summary 6-11

Table 6-9. RESults Command Summary 6-11

Table 6-10. MSINformation Command Summary 6-13

Table 6-11. Command Cross Reference for [Stand-by] Screen 6-14

Table 6-12. Command Cross Reference for [Measuring] Screen 6-15

Table 6-13. Command Cross Reference for Manual Test Result 6-15

Table 6-14. MSINformation Command Cross Reference 6-16

Table 6-15. SMS Command Cross Reference 6-16

Table 6-16. Command Cross Reference for [Stand-by] Screen 6-17

Table 6-17. TPOWer/TXAMplitude Command Summary 6-18

Table 6-18. RFGenerator Subsystem Command Summary 6-18

Table 6-19. HCOPy Subsystem Command Summary 6-19

Table 6-20. SYSTem Subsystem Command Summary 6-19

Table 6-21. TRIGger Subsystem Command Summary 6-19

7 Sample Program

Table 7-1. Interface Configuration 7-3

Table 7-2. Status Display Functions 7-4

Table 7-3. Functions for Sending and Receiving Data 7-5

Table 7-4. Program Comments 7-9

Table 7-5. Programming Comments 7-13

Table 7-6. Program Comments 7-16

Otros manuales para N9360A

Tabla de contenidos

Otros manuales de Equipo de prueba de Agilent Technologies

Agilent Technologies

Agilent Technologies 81250 Manual de usuario

Agilent Technologies

Agilent Technologies 8156A Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies 11974 Series Manual de usuario

Agilent Technologies

Agilent Technologies 16048A Manual de operación

Agilent Technologies

Agilent Technologies U1604A Manual de usuario

Agilent Technologies

Agilent Technologies 16194A Manual de operación

Agilent Technologies

Agilent Technologies 86100C Manual de usuario

Agilent Technologies

Agilent Technologies E7490A Manual de usuario

Agilent Technologies

Agilent Technologies E7495A RF Manual de instrucciones

Agilent Technologies

Agilent Technologies Infiniium 90000 Q-Series Manual de usuario

Agilent Technologies

Agilent Technologies Keysight N9310A Manual de usuario

Agilent Technologies

Agilent Technologies N5230-60102 Manual de instalación y operación

Agilent Technologies

Agilent Technologies InfiniiVision MSO6102A Manual de usuario

Agilent Technologies

Agilent Technologies U2802A Manual de usuario

Agilent Technologies

Agilent Technologies N5230AU-974 Manual de instalación y operación

Agilent Technologies

Agilent Technologies N9360A Manual de usuario

Agilent Technologies

Agilent Technologies InfiniiVision 5000 Series Manual de usuario

Agilent Technologies

Agilent Technologies N4010A Instrucciones de instalación y funcionamiento

Agilent Technologies

Agilent Technologies 54831A Manual de usuario

Agilent Technologies

Agilent Technologies 1142A Manual de usuario

Agilent Technologies

Agilent Technologies 280-DS Manual de usuario

Agilent Technologies

Agilent Technologies 16048E Manual de operación

Agilent Technologies

Agilent Technologies U7242A Manual de usuario

Agilent Technologies

Agilent Technologies E5022B Manual del propietario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manual de usuario

Ritmix

Ritmix RAT-701 Manual de usuario