Agilent Technologies Infiniium 9000 Series Manual de usuario

Infiniium 9000 Series

Oscilloscope

User’s Guide

Publication number 54904-97008

November 2012

In This Book

This book provides the information you need to begin using the Infiniium 9000

Series oscilloscope. It contains four chapters:

Chapter 1, “Setting Up the Oscilloscope”, contains inspection, power

requirements, air flow, and setup information.

Chapter 2, “Working in Comfort”, contains recommendations for working

comfortably and safely while operating the Infiniium oscilloscope.

Chapter 3, “Using the Oscilloscope”, gives an overview of the front panel and

the graphical user interface, and tells you how to perform basic operations

with the oscilloscope.

Chapter 4, “Accessing the Online Help”, describes the Infiniium oscilloscope

application’s online help contents and navigation. The online help describes

how to use the Infiniium oscilloscope software in more detail.

For More Information

• For detailed information on how the oscilloscope makes measurements and

how to use the oscilloscope, see the Infiniium oscilloscope application’s

online help.

• For information on programming the oscilloscope using a computer with a

GPIB interface card or LAN interface card, see the Programmer’s Reference

for your model number oscilloscope found in the Infiniium oscilloscope

application’s online help.

• For information on testing and servicing the oscilloscope, see the Service

Guide manual found in the Infiniium oscilloscope application’s online help.

9000 Series Oscilloscopes -- At a Glance

9000 Series Oscilloscope Models

DSO9024H, DSO9054H, DSO9104H, and DSO9204H models have up to 12 bits

of high resolution.

Ease of use with high performance

The Agilent Technologies Infiniium oscilloscopes combine unprecedented

ease-of-use with high-performance digitizing oscilloscope functionality to

simplify your design and analysis measurement tasks.

• Traditional oscilloscope front-panel interface provides direct access to the

controls needed for most troubleshooting tasks.

• Graphical user interface with menus, windows, dialog boxes, and toolbars

provides easy access to dozens of configuration and analysis tools, ensuring

you can set up and make the most complex measurements.

• Models with bandwidths from 250 MHz to 4 GHz.

Display shows waveforms and graphical user interface

• Graphical interface allows direct interaction with waveforms, including

drag-and-drop positioning and instant waveform zoom.

• Touchscreen display allows oscilloscope operation without an external

pointing device.

• Waveforms displayed in color, making correlations easy.

• Current configuration parameters displayed near the waveform display and

are color-coded to make identification easy.

Model Bandwidth Std. Memory (2 ch, 4 ch)

DSO/MSO9064A 600 MHz 40 Mpts, 20 Mpts

DSO/MSO9104A 1 GHz 40 Mpts, 20 Mpts

DSO/MSO9254A 2.5 GHz 40 Mpts, 20 Mpts

DSO/MSO9404A 4 GHz 40 Mpts, 20 Mpts

DSO9024H 250 MHz 100 Mpts, 50 Mpts

DSO9054H 500 MHz 100 Mpts, 50 Mpts

DSO9104H 1 GHz 100 Mpts, 50 Mpts

DSO9204H 2 GHz 100 Mpts, 50 Mpts

9000 Series Oscilloscopes -- At a Glance

• Graphical interface menus and toolbars simplify complex measurement

setups.

Horizontal controls set sweep speed and position

• Main sweep speeds from 5 ps/div to 20 s/div.

• Intensified waveforms on main sweep window make it easy to see what will

appear in the zoom window.

Acquisition and general controls start and stop the scope and do basic

setup

• Run and stop controls for continuous or single acquisitions.

• Clear display before one or more acquisitions.

• Default setup and Autoscale set initial configuration.

Hard disk drive and USB 2.0 port for saving and restoring setups and

measurement results

• Store measurement displays for inclusion in reports and test setup guides.

• Store oscilloscope setups to repeat tests another time.

• Hard disk stores oscilloscope operating system.

Trigger setup controls set mode and basic parameters

• Select Edge, Glitch, or Advanced Modes.

• Choose input source and slope.

• Use graphical user interface to simplify configuration of pattern, state,

delay, and violation trigger modes.

Vertical controls set attenuation and position

• Input attenuation adjustable from 1 mV/div to 1 V/div.

• Color-coded knobs make it easy to find the controls that affect each

waveform.

Marker and quick measurements help measure waveform parameters

• Waveform markers A and B to check voltage or Δ-time at any point on the

displayed waveform.

Contents

9000 Series Oscilloscopes -- At a Glance 3

1 Setting Up the Oscilloscope

To inspect package contents 9

To inspect options and accessories 10

Technical Specifications 11

To position for proper airflow 12

To connect power 14

To connect a mouse, keyboard, LAN cable, USB device, and printer 15

To connect oscilloscope probes 17

To tilt the oscilloscope for easier viewing 19

To turn on the oscilloscope 20

To turn off the oscilloscope 21

To verify basic oscilloscope operation 22

Installing application programs on Infiniium 24

Changing Windows Operating System Settings 25

To clean the oscilloscope 26

2 Working in Comfort

About Repetitive Strain Injury 29

Mice and Other Input Devices 30

3 Using the Oscilloscope

Front Panel 34

Acquisition Run Controls 36

Horizontal Controls 36

Trigger Controls 36

Vertical Controls 37

Marker and Measurement Controls 37

To set the oscilloscope to a known starting condition 38

To start and stop waveform acquisition 39

To clear the waveform display 40

To turn an analog channel on or off 41

To turn the digital channels on or off 42

To adjust the analog channel’s vertical scale and offset 43

To adjust horizontal scale and horizontal position 44

To magnify a part of the waveform using Zoom 45

To set the oscilloscope to trigger on an edge 46

To use the markers 47

To use the quick measurements 48

To enable or disable the touch screen 49

Graphical User Interface 51

To perform basic user interface operations 58

To select a command from the menu bar 62

To select a command from a context-sensitive menu 63

To start and stop waveform acquisition 66

Contents

To clear the waveform display 67

To print the screen 68

To change waveform brightness 69

To turn a channel on or off 70

To adjust the vertical offset 71

To adjust vertical scaling 73

To access the channel setup 74

To set the horizontal reference point 75

To adjust horizontal scale 76

To adjust horizontal position 77

To access the horizontal setup 78

To zoom on a section of the waveform 79

To move the markers using the graphical interface 81

To make a measurement on a waveform 82

To access the trigger setup 84

To set an edge trigger 85

To set dialog box preferences 86

To recover your Infiniium hard disk 87

4 Accessing the Online Help

To access the online help 91

To access context-sensitive information 94

Setting Up the Oscilloscope

This chapter shows you how to set up your Infiniium oscilloscope, connect

power and accessories, and verify general operation.

Setting Up the Oscilloscope

To inspect package contents

❏Inspect the shipping container for damage.

Keep a damaged shipping container or cushioning material until you have

inspected the contents of the shipment for completeness and have checked

the oscilloscope mechanically and electrically.

❏Inspect the oscilloscope.

• If there is mechanical damage or a defect, or if the oscilloscope does not

operate properly or does not pass performance tests, notify your Agilent

Technologies Sales Office.

• If the shipping container is damaged, or the cushioning materials show signs

of stress, notify the carrier and your Agilent Technologies Sales Office. Keep

the shipping materials for the carrier’s inspection. The Agilent Technologies

Sales Office will arrange for repair or replacement at Agilent’s option

without waiting for claim settlement.

❏Verify that you received the following items in the Infiniium Oscilloscope

packaging.

• Infiniium Oscilloscope

•Mouse

• Touch screen Stylus

• Front Panel Cover

• N2873A 10:1 Divider Passive Probe per Scope Channel

• Channel Flying Lead Set Logic Probe, MSO Cable, and Calibration Fixture

(MSO models only)

• Probe Accessory Pouch (mounts on rear of oscilloscope)

• Agilent I/O Libraries Suite 15.0

• Localized Power Cord

• Keyboard

If anything is missing, contact your nearest Agilent Technologies Sales Office.

If the shipment was damaged, contact the carrier, then contact the nearest

Agilent Technologies Sales Office.

Setting Up the Oscilloscope

To inspect options and accessories

Verify that you received the options and accessories you ordered and that none

were damaged.

If anything is missing, contact your nearest Agilent Technologies Sales Office.

If the shipment was damaged, or the cushioning materials show signs of stress,

contact the carrier and your Agilent Technologies Sales Office.

For a complete list of options and accessories available for the 9000 Series

oscilloscopes, see the Infiniium 9000 Series Oscilloscopes data sheets.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de Agilent Technologies

Agilent Technologies

Agilent Technologies Infi niium 9000 Series Manual del operador

Agilent Technologies

Agilent Technologies 16451B Manual de usuario

Agilent Technologies

Agilent Technologies 1100 Series Manual de usuario

Agilent Technologies

Agilent Technologies Infiniium 8000A Manual de usuario

Agilent Technologies

Agilent Technologies MSO8104A Guía de inicio rápido

Agilent Technologies

Agilent Technologies 8648A Manual de operación

Agilent Technologies

Agilent Technologies 85052B Manual

Agilent Technologies

Agilent Technologies Agilent 34980A Manual de usuario

Agilent Technologies

Agilent Technologies 54853A Manual de usuario

Agilent Technologies

Agilent Technologies 93000 SOC Series Guía de instalación

Agilent Technologies

Agilent Technologies 54621A Manual de usuario

Agilent Technologies

Agilent Technologies E6621A Manual de usuario

Agilent Technologies

Agilent Technologies Medalist i3070 Series 5i Manual

Agilent Technologies

Agilent Technologies InfiniiVision 7000 Series Manual de usuario

Agilent Technologies

Agilent Technologies 16048G Manual de operación

Agilent Technologies

Agilent Technologies 85056A Manual

Agilent Technologies

Agilent Technologies E7495A RF Manual de instrucciones

Agilent Technologies

Agilent Technologies 16034H Manual de usuario

Agilent Technologies

Agilent Technologies E1852B Manual de usuario

Agilent Technologies

Agilent Technologies U7242A Manual de usuario

Agilent Technologies

Agilent Technologies 54620 Series Instrucciones de funcionamiento y seguridad

Agilent Technologies

Agilent Technologies 16197A Manual de operación

Agilent Technologies

Agilent Technologies 54810A Manual de usuario

Agilent Technologies

Agilent Technologies 81101A Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manual de usuario

Ritmix

Ritmix RAT-701 Manual de usuario