Agilent Technologies Keysight N9310A Manual de usuario



Agilent N9310A

RF Signal Generator

User’s Guide

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or transla-

tion into a foreign language) without prior

agreement and written consent from Agi-

lent Technologies, Inc. as governed by

United States and international copyright

laws.

Edition

First Edition, June 2006

Printed in China

Agilent Technologies, Inc.

Hi-Tech Industrial Development Zone (West

District)

Chengdu 611731, P.R.C

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Agilent provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indi-

cated conditions are fully under-

stood and met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

Software Revision

This guide is valid for V1.0 revisions of the

Agilent N9310A RF Signal Generator soft-

ware.

Content

1Overview 1

Agilent N9310A At a Glance 2

Front Panel Overview 4

Front Panel Display 7

Rear Panel Overview 9

Front and rear panel symbols 11

2 Getting Started 13

Check the Shipment and Order List 14

Safety Notice 16

Environmental Requirements 17

Electrical Requirements 18

Power on and Check 21

Some Tips 24

Enable an option 24

Remote Control 25

Firmware Update 26

Connectors Maintenance 27

3UsingFunctions 29

Commonly used Front-panel Elements 30

Generating a CW Signal 32

Generating a Step Swept Signal 33

Content

Generating an RF Sweep 36

Generating an Amplitude Sweep 38

Generating an LF Sweep 39

Generating a Modulated Signal 40

Preparing the Modulation Format 40

Generating an AM signal 42

Generating an FM Signal 43

Generating a Phase Modulated Signal 44

Generating a Pulse Modulated Signal 45

Generating an I/Q Modulated Signal (Option 001 Only) 46

Generating an LF Output 48

Save, Recall and Delete an Instrument State 49

Saving an Instrument State 49

Recalling an Instrument State 51

Delete an Instrument State 51

4KeyReference 53

AM 54

Amplitude 57

Arrow Keys 58

Enter 58

File 59

FM 61

Frequency 64

I/Q (Option 001 only) 64

LF Out 65

Mod On/Off 66

RF On/Off 66

Numeric Keypad 66

Phase Modulation 67

Switch 69

Content

Preset 70

Pulse 71

Sweep 73

Trigger 80

Utility 81

5 Programming Fundamentals 85

Remotely Operating Your N9310A 86

Getting Started with SCPI 92

An Introduction to the SCPI Language 92

Common Terms used in this Book 93

Command Categories 94

Command Syntax 94

Program and Response Messages 98

Subsystem Command Trees 99

IEEE 488.2 common command 100

6 Subsystem Command Reference 101

Preparing for Use 102

Frequency Subsystem 105

Amplitude Subsystem 109

Trigger Subsystem 111

Sweep Subsystem 112

AM Subsystem 122

FM Subsystem 125

Phase Modulation Subsystem 128

Pulse Modulation Subsystem 130

I/Q Modulation Subsystem 132

Content

Utility Subsystem 133

Modulation State Subsystem 137

RF Output State Subsystem 138

LF Output Subsystem 139

Subsystem Command Trees 141

Programming Examples 151

Programming in C using the VTL 152

Example 1 - Checking USB Connection 154

Example 2 - Generating a CW signal 156

Example 3 - Generating an AM Signal 158

Example 4 - Generating an continuous RF Sweep 160

7 Instrument Messages 163

Overview 164

Command Errors 165

Execution Conflict 168

System Errors 169

Hardware Errors 170

8 Supplementary Information 171

Check the Basics 172

Read the warranty 173

Contact Agilent Technologies 174

List of Commands 175

Index 179

s

Agilent N9310A RF Signal Generator

User’s Guide

Overview

Agilent N9310A At a Glance 2

Front Panel Overview 4

Front Panel Display 7

Rear Panel Overview 9

Front and rear panel symbols 11

This chapter describes the general features and functions of

the Agilent N9310A RF Signal Generator and provides an

introduction to the front and rear panel.

2N9310A User’s Guide

1Overview

Agilent N9310A At a Glance

An Agilent N9310A RF Signal Generator finds general

purpose applications in manufacturing, service, development

and education.

The signal generator comprises an optional broadband I/Q

modulator, which is able to generate digital signals in

conjunction with an external I/Q source.

General Features and Functions

The Agilent N9310A RF Signal Generator provides:

• 9 kHz to 3 GHz frequency range

• –127 to +13 dBm (+20 dBm settable) level range

• Built in AM, FM, FM, and pulse modulation

• RF sweep, LF sweep and amplitude sweep

•0-3 Vp LF output (into 50 W)

• 6.5- inch TFT LCD

• Universal USB interface

• 1- year calibration cycle

Overview 1

N9310A User’s Guide 3

Options

✔Option 001: I/Q modulator

(part number: N9310A - 001)

This option provides an additional internal I/Q

modulator. Using this option in the signal generator

generates digital signals. Option 001 also requires an

external I/Q baseband signal input.

✔Option 1CM: Rackmount flange kit

(part number: N9310A - 1CM)

Use a rackmount kit to facilitate installation in a

standard rack.

✔Option 1TC: Hard transit case

(part number: N9310A - 1TC)

A hard transit case protects the signal generator during

transportation and storage.

4N9310A User’s Guide

1Overview

Front Panel Overview

1DisplayThe LCD screen shows information on the current

function. Information includes status indicators, frequency

and amplitude settings, and error messages. Labels for

softkeys are located on the right- hand side of the display.

For further description of the front panel display, refer to

“Front Panel Display” on page 7

2SoftkeysSoftkeys vary in function. They activate functions

displayed to the left of each key. Refer to Chapter 4, “Key

Reference,” starting on page 53 for further information.

3EnterThe hardkey terminates data entry field or

parameter selection. It also triggers a single sweep.

4AmplitudePressing hardkey allows you to edit the CW

(continuous wave) amplitude.

5FrequencyPressing hardkey allows you to edit the CW

Frequency.

6 Function keys These hardkeys connect directly to the

following main functions:

•Preset sets the signal generator to factory default settings.

•AM configures an amplitude modulation.

FUNCTIONS

LF OU T RF OUT 50

Rem o t e

Standby

N93 10A RF Signal Gen erat or 9 kHz - 3 .0 GHz

Frequency

Amplitude

Enter

MOD

On/Off

I/Q

Preset

FMPulse

Utility

Sweep

Trigger

Local

File

LF Out

REV ERSE PWR

4W MA X 30VD C

Enter

Amplitude

Frequency

Otros manuales para Keysight N9310A

Tabla de contenidos

Otros manuales de Equipo de prueba de Agilent Technologies

Agilent Technologies

Agilent Technologies 85056A Manual

Agilent Technologies

Agilent Technologies E5022B Manual del propietario

Agilent Technologies

Agilent Technologies U1610/20A Manual de usuario

Agilent Technologies

Agilent Technologies 54830 Series Manual de usuario

Agilent Technologies

Agilent Technologies N4010A Instrucciones de instalación y funcionamiento

Agilent Technologies

Agilent Technologies Infiniium 90000 Q-Series Manual de usuario

Agilent Technologies

Agilent Technologies 8960 Manual de usuario

Agilent Technologies

Agilent Technologies InfiniiVision 7000B Series Manual de usuario

Agilent Technologies

Agilent Technologies J-BERT N4903A Manual de usuario

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X-Series Manual

Agilent Technologies

Agilent Technologies Infiniium 90000 A Manual de usuario

Agilent Technologies

Agilent Technologies 54622A Manual de usuario

Agilent Technologies

Agilent Technologies 280-DS Manual de usuario

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X-Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT N4901A Manual de usuario

Agilent Technologies

Agilent Technologies 16034H Manual de usuario

Agilent Technologies

Agilent Technologies 85056K Manual de usuario

Agilent Technologies

Agilent Technologies 87511A Manual de operación

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X-Series Manual

Agilent Technologies

Agilent Technologies Infiniium 90000 X Manual de usuario

Agilent Technologies

Agilent Technologies E5091A Manual de usuario

Agilent Technologies

Agilent Technologies E1852B Manual de usuario

Agilent Technologies

Agilent Technologies Infiniium 9000 Series Manual de usuario

Agilent Technologies

Agilent Technologies HP 83711A Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manual de usuario

Ritmix

Ritmix RAT-701 Manual de usuario