Agilent Technologies Infiniium 90000 X Manual de usuario

Agilent Infiniium 90000 X-Series Oscilloscopes

Combining deep logic analysis with the

industry’s highest performance oscilloscope

Featuring the world’s fastest mixed signal oscilloscope

Data Sheet

Engineered for 33 GHz true analog bandwidth that delivers:

Need bandwidth?

When you’re deploying leading edge high-speed serial bus

designs like FibreChannel, SAS 12 G, or 10 Gb Ethernet

KR, jitter matters and picoseconds count. When you’re

doing spectral analysis of wide-bandwidth RF signals or

investigating transient phenomena, bandwidth is critical.

You need the most accurate real-time oscilloscope you can

get. Agilent Infiniium 90000 X-Series scopes are engineered

for 33 GHz true analog bandwidth that delivers:

Analog bandwidth Sample rate Max Memory

Model number 2 channel 4 channel 2 channel 4 channel depth 4 channel

DSAX93204A 33 GHz 16 GHz 80 GSa/s 40 GSa/s 2 Gpts

DSOX93204A 33 GHz 16 GHz 80 GSa/s 40 GSa/s 2 Gpts

DSAX92804A 28 GHz 16 GHz 80 GSa/s 40 GSa/s 2 Gpts

DSOX92804A 28 GHz 16 GHz 80 GSa/s 40 GSa/s 2 Gpts

DSAX92504A 25 GHz 16 GHz 80 GSa/s 40 GSa/s 2 Gpts

DSOX92504A 25 GHz 16 GHz 80 GSa/s 40 GSa/s 2 Gpts

DSAX92004A 20 GHz 16 GHz 80 GSa/s 40 GSa/s 2 Gpts

DSOX92004A 20 GHz 16 GHz 80 GSa/s 40 GSa/s 2 Gpts

DSAX91604A 16 GHz 16 GHz 80 GSa/s 40 GSa/s 2 Gpts

DSOX91604A 16 GHz 16 GHz 80 GSa/s 40 GSa/s 2 Gpts

DSAX91304A 13 GHz 13 GHz 80 GSa/s 40 GSa/s 2 Gpts

DSOX91304A 13 GHz 13 GHz 80 GSa/s 40 GSa/s 2 Gpts

33 GHz and still improving

The industry experts have spoken, and the 90000 X-Series is

one of the most award-winning oscilloscopes in the history

of the oscilloscope industry. With Agilent’s 90000 X-Series

oscilloscope, you get up to 33 GHz of real-time bandwidth

and the best measurement accuracy.

Even with all of the 90000 X-Series’ success, Agilent’s

software and hardware teams still continue to improve its

accuracy and capability. The 90000 X-Series now features

a more accurate calibration, PrecisionProbe software,

InfiniiView software, and EZJIT Complete; making it the

go-to tool for not only your compliance needs, but also your

design and validation needs.

Need more than just a regular oscilloscope?

As part of its continual improvement, 90000 X-Series now

has 16 digital channels with time resolution as fast as 50 ps.

The mixed signal oscilloscope is the ideal tool for debugging

tough memory challenges with unique triggering specific to

memory technologies.

Custom front end technology requiring over five years of design

effort yields the fastest real-time oscilloscope hardware available

today.

BW Upgradeable

Buy the performance

you need today

knowing you have the

headroom you need

for tomorrow with

bandwidth upgradability

to 33 GHz

• The industry’s highest real-time scope measurement accuracy

• The industry’s only 30 GHz oscilloscope probing system

• The industry’s fastest logic analysis on an oscilloscope

(16 channels at up to 50 ps timing resolution)

The industry’s highest real-time scope measurement

accuracy.

When you’re designing with faster signals, shrinking

eyes and tighter jitter budgets errors introduced by your

oscilloscope can seriously impact your design margins. The

Agilent Infiniium 90000 X-Series scopes deliver the highest

measurement accuracy available by offering the following

characteristics:

• True analog bandwidth to 33 GHz

• Lowest oscilloscope noise floor (2.10 mV at 50 mV / div,

33 GHz)

• Lowest jitter measurement floor (100 fs)

Having the most accurate analog bandwidth and lowest

noise floor available means better spectral analysis of

transients and wide-bandwidth RF signals.

Engineered for 33 GHz true analog bandwidth that delivers:

Industry’s first and only 30 GHz oscilloscope probing

system.

No matter how much bandwidth your scope has, if

your probes can’t match the scope’s bandwidth, your

measurements are compromised. The Agilent Infiniium 90000

X-Series scopes offer probing solutions that are up to the

tough challenges today’s high-speed signal data rates with

the following:

• InfiniiMax III high frequency probes with automatic

AC calibration (PrecisionProbe)

• Fully-integrated probe amplifier s-parameter

correction

• The industry’s first bandwidth-upgradable probe

amplifier

The industry’s most comprehensive application-

specific measurement software.

When time is of the essence, you need tools that can speed

true understanding of your signal activity. From serial bus

debug and compliance testing to jitter measurements to

sophisticated triggering capability, Agilent stays on top of

the test standards and your requirements by working to

ensure that you get accurate results more quickly.

The Agilent Infiniium 90000 X-Series scopes offer the following:

• The broadest range of jitter, triggering, analysis and

display tools

• Pre-built compliance testing software based on the

expertise of our engineers on the standards committees

• Support for emerging technologies including

FibreChannel, SAS 12G, or MIPI-MPhy

Easily isolate signals of interest with zone qualified view

using InfiniiScan software triggering, just one of more than

40 application-specific software options.

Engineered for 33 GHz true analog bandwidth that now combines deep

logic analysis with the industry’s highest performance oscilloscope:

33 GHz true analog bandwidth of the

oscilloscope and 80 GSa/s sample rate

provides ultra-low noise.

See your signal more clearly with a 12.1-inch

XGA (1024 x 768) high-resolution color touch

screen display.

Identify anomalies easily with a 256-level

intensity-graded or color-graded persistence

display that provides a three dimensional view

of your signals.

Remote access through 10/100/1000 BaseT

LAN interface with web-enabled connectivity

uses ultra-responsive Ultra VNC.

GPIB and LAN provide remote measurements.

Optional Infiniium application remote program

interface allows application/compliance

software automation. LXI class C compliant.

MATLAB support.

Calibration edge with a rise time of less

than 15 ps enables TDT calibration with

PrecisionProbe software.

Capture your longest signal with up to

25 ms data using 2 Gpt of acquisition

memory at 80 GSa/s.

An additional four USB 2.0 host ports and a

USB 2.0 device port on the back panel. Perfect

for extra connectivity including an optical

drive. A USB 2.0 device port lets you control

the scope and transfer data via a USB 2.0 480-

Mbpts connection.

Optional x4 PCIExpress slot speeds up offload times by

a factor of 5, using socket drivers. Use this option (823)

for faster deep offloads of the waveforms.

Removable solid state drive option is available.

It offers improved data security and speed.

10 MHz reference clock can be input to

or output from the scope to allow precise

timebase synchronization with more than

one oscilloscope, RF instruments or logic

analyzers.

Dedicated single acquisition button provides

better control to capture a unique event.

Customizable multipurpose key gives you any

five automated measurements with a push

of a button. You can also configure this key

to execute a script, print/save screen shots,

save waveforms or load a favorite setup.

Measure section, including a toggling marker

button and a dedicated marker knob, provides

quick access to your marker control.

Quick access to fine/vernier control by

pressing the horizontal and vertical sensitivity

knobs.

Increase your productivity with a familiar

Infiniium graphical user interface, including

your favorite drag-and-drop measurement

icons. Infiniium’s analog-like front panel

has a full set of controls color-coded to the

waveforms and measurements, making your

tasks simple.

Three front panel USB 2.0 host ports match

your USB keyboard, mouse, and USB memory

drive connection for saving setup and data

files and screen shots.

Threaded RF connectors ensure the most reliable signal integrity

for high-performance instruments. The AutoProbe II interface

combines the tried-and-true, robust 3.5 mm threaded RF connector

of Agilent sampling scopes with a convenient automatic torque

mechanism (clutch) that ensures a consistent 8 in. lbs. connection

is made without the hassles of a torque wrench.

Featuring bandwidths from 13 to 33 GHz

True-analog bandwidth- 33 GHz

The engineering of a high-performance real-time oscilloscope

front end requires designing pre-amplifiers, triggering

capability, and sampling technology, then seamlessly tying

them together. Using fine line microcircuit processes and

relying extensively on years of experience with RF design,

Agilent developed the front end multi-chip modules shown

here for the Infiniium 90000 X-Series oscilloscopes. Packaging

technology provides excellent high-frequency electrical

properties along with superior heat dissipation. It is a key

enabling technology block in Agilent’s 90000 X-Series’ high

measurement accuracy.

Engineered for 33 GHz true analog bandwidth that delivers:

The Oscilloscope: highest real-time scope measurement accuracy

Whether you’re deploying emerging high speed bus

technology, identifying spectral content of wide-bandwidth

RF signals, or analyzing transient physical phenomena, you

need the truest representation of your signals under test.

Agilent invested in leading edge technology to bring you

the highest real-time oscilloscope measurement accuracy

available today.

Custom integrated circuits using a proprietary Indium

Phosphide (InP) process and breakthrough packaging

technology enable industry-leading performance, including

the:

• Up to 33 GHz of true analog bandwidth

• Lowest oscilloscope noise floor

• Lowest oscilloscope jitter measurement floor

Low noise floor

One of the keys to measurement accuracy at high

bandwidths is minimizing the noise generated

by the oscilloscope itself. Agilent utilizes a

proprietary Indium Phosphide (InP) integrated

circuit process in the design of the Infiniium 90000

X-Series oscilloscopes because other oscilloscope

techniques just can’t deliver the necessary

combination of high-bandwidth and low noise. Not

only does that mean you’re purchasing the best

tool today, but it also means you can count on

technology leadership from Agilent in the future.

Better calibration improves spectral purity

Agilent oscilloscopes are constantly improving

their measurement accuracy. The latest

innovation is a new, improved calibration routine

that better aligns the sample points of the

analog to digital converter.

The improved calibration results in higher

spurious free dynamic range (SFDR) and

effective number of bits (ENOB). For instance,

the SFDR is improved by as much as 15 dBC

depending on the carrier frequency. The

higher SFDR is ideal for making RF and optical

measurements where spectral purity is of the

utmost importance. Improved SFDR and ENOB

also means better jitter performance.

Ultimately this means the 90000 X-Series now

features the highest SFDR and ENOB of any

oscilloscope on the market.

Low real-time oscilloscope jitter measurement floor,

just got lower (now 100 fs)

Oscilloscope bandwidth allows signal rise times to be

more accurately depicted. The oscilloscope noise floor

directly impacts the y-axis voltage placement of each signal

data point. The Infiniium 90000 X-Series scopes combine

superiority in these characteristics with extremely low

sample clock jitter (< 100 femptoseconds). This ensures the

lowest possible contribution to jitter measurements from

the scope itself so you’re using your jitter budget on your

design.

In addition to its low jitter measurement floor, the 90000

X-Series has the industry’s deepest memory with up

to 2 Gpts, allowing you to resolve low frequency jitter

components in a single measurement.

The 90000 X-Series now features an even more advanced

calibration system known as sine wave cal. This sine wave

calibration further lowers spurs caused by ADC interleaving

errors and enables lower jitter and higher spurious free

dynamic range. Sine wave calibration simply builds on its

industry leading accuracy.

Jitter measurement floor of less than 100 fs

Improved calibration improves the spurious free dynamic rang by up to

15 dBc

Engineered for 33 GHz true analog bandwidth that delivers:

A mixed signal oscilloscope integrates traditional

analog channels with 16 digital channels

In 1996, Agilent pioneered the mixed signal oscilloscope

Innovative IC technology we called ‘MegaZoom,’ which

delivered highly responsive deep memory so designers can

see both cause and effect in digitally controlled analog

phenomena. The first MSO was named Test & Measurement

World Test Product of the Year in 1997.

Agilent MSOs seamlessly integrate the familiar controls of

an oscilloscope with the additional digital data collection

and pattern recognition of a logic analyzer. You can trigger

across any combination of analog and digital channels;

integrate serial bus triggering and decode and even see

inside your FPGA designs.

Agilent continues to lead the way with MSOs

The MSO 90000 X-Series is specifically targeted at the

DDR2/3/4 technologies, simplifying the complicated task

of debugging memory technologies. The 20 GSa/s on 8

channels means you can easily separate reads and writes

on all DDR4 speeds. The MSO 90000 X-Series is fully

compatible with Agilent 90-pin logic analysis connectors,

making it easy to connect to your devices.

Combining analog and digital performance

Today’s designs require access to complex triggers and

multiple instruments. The 90000 X-Series mixed signal

oscilloscopes provide up to 20 channels you can use at

once. Each channel can be combined in a unique pattern

trigger. The 90000 X-Series has the ability to label each

individual channel as part of a bus for decoding, saving

hours of manual work.

The 90000 X-Series also features application-specific decode

applications that are designed for up to 20 channels. These

applications include many low-speed serial and parallel

busses. For instance, the JTAG protocol decode is available

only on Agilent oscilloscopes.

The Industry’s Fastest Mixed Signal Oscilloscope

Engineered for 33 GHz true analog bandwidth that delivers:

Industry’s only bandwidth

upgradable probes

Purchase the probing performance

you need today with confidence that

you have headroom for the future with

Agilent’s InfiniiMax III bandwidth-

upgradable probes. Upgrade to higher

performance at a fraction of the cost of

probe bandwidth upgrades.

The InfiniiMax III probing system uses the same InP technology that enables high

bandwidth and low noise oscilloscope measurements.

Fully-integrated probe amplifier s-parameter correction

Each InfiniiMax III probe amplifier comes pre-packaged with

its own customized characteristics via s-parameter files.

The InfiniiMax III probing system and the 90000 X-Series

communicate via an I²C bus. This communication allows the

90000 X-Series to download the customized s-parameter files

from the InfiniiMax III probing amplifier to the scope for greater

accuracy.

To take advantage of your investment in a high-bandwidth

oscilloscope, you must have a probing system that can

deliver bandwidth to the probe tip. Agilent rises to the

challenge of high-speed signal reproduction with these

probing innovations:

• The industry’s first bandwidth upgradable probe

amplifier

• Fully-integrated probe amplifier s-parameter correction

The InfiniiMax III 30 GHz probing system includes accessories to enable probing with a ZIF tip, browsing, or connecting to 3.5 mm inputs.

Industry’s first 30 GHz oscilloscope probing system

Analysis tools: PrecisionProbe (option 001)

Turn your 90000 X-Series oscilloscope into a time-domain transmissometry (TDT) and

quickly characterize and compensate any input into your scope.

PrecisionProbe technology turns

your oscilloscope into the ultimate

characterization tool. Not only can you

do the normal de-embedding through

InfiniiSim, PrecisionProbe allows quick

characterization of your entire probe

system (including cables and switches)

without the need for extra equipment.

PrecisionProbe takes advantage of the

fast “cal output” signal on the 90000

X-Series to characterize and compen-

sate for loss on the measurement

system.

PrecisionProbe technology:

• Properly creates custom probe

transfer function =VOut / VIn

• Properly characterizes probed

system transfer function such that

VOut / VInc = VOut / VSrc

• Removes unwanted S21 cable

insertion loss

PCI Express measurement comparisons

Root complex device Eye height (mV) Eye height PrecisionProbe Gain

2.5 GT/s_12 GHz 517.19 553.94 7.1%

5 GT/s_12 GHz_3.5 dB 312.22 348.19 11.5%

5 GT/s_12 GHz_6 dB 341.1 376 10.2%

5 GT/s_16 GHz_3.5 dB 306.6 348.33 13.6%

5 GT/s_16 GHz_6 dB 344.4 374.41 8.7%

8 GT/s_12 GHz_P7 96.83 103.09 6.5%

8 GT/s_12 GHz_P8 100.16 108.33 8.2%

8 GT/s_16 GHz_P7 96.92 106.01 9.4%

8 GT/s_16 GHz_P8 100.24 108.24 8.0%

By characterizing and compensating for cable loss on the cable connected to the PCI

Express test fixture, the designer was able to gain between 6.5% and 13.6% margin

that would have been lost otherwise.

Now every probe and cable in the system

can have the exact same frequency

response – probe to probe or cable to

cable – without measurement variation

caused by probe variation. Now you can

properly characterize custom probes.

In addition to characterizing the cables,

PrecisionProbe allows for immediate use

on the same instrument. PrecisionProbe

saves you time and money while increas-

ing your measurement accuracy.

When you combine InfiniiMax probes

with switches between the amplifier and

the probe head, PrecisionProbe allows

for full correction and automation of

each probe’s path. Full automation is

then available to allow for quick swap-

ping of the inputs via Infiniium’s compli-

ance framework. For increased accuracy,

purchase PrecisionProbe Advanced for

faster edge speeds and true differential

measurements.

Agilent’s uses Indium Phosphide to

procuce a sub 12 ps edge perfect for

characterizing cable and probe frequency

response

Tabla de contenidos

Otros manuales de Equipo de prueba de Agilent Technologies

Agilent Technologies

Agilent Technologies E6651A Manual de usuario

Agilent Technologies

Agilent Technologies InfiniiVision 5000 Series Manual de usuario

Agilent Technologies

Agilent Technologies 16533A 1-GSa/s Manual

Agilent Technologies

Agilent Technologies U1452A Manual de usuario

Agilent Technologies

Agilent Technologies 11974 Series Manual de usuario

Agilent Technologies

Agilent Technologies Infiniium 90000 Q-Series Manual

Agilent Technologies

Agilent Technologies 54621A Manual de usuario

Agilent Technologies

Agilent Technologies U1602B Manual de usuario

Agilent Technologies

Agilent Technologies E6392B Manual de usuario

Agilent Technologies

Agilent Technologies Medalist x6000 Especificaciones

Agilent Technologies

Agilent Technologies DSO-X-2024A Manual de usuario

Agilent Technologies

Agilent Technologies 8960 Manual de usuario

Agilent Technologies

Agilent Technologies InfiniiVision 4000 X-Series Manual

Agilent Technologies

Agilent Technologies 3000 Series Manual

Agilent Technologies

Agilent Technologies HP 10070A Manual de usuario

Agilent Technologies

Agilent Technologies J2126A Manual de instalación y operación

Agilent Technologies

Agilent Technologies ENA Series Manual de usuario

Agilent Technologies

Agilent Technologies 16034E Manual de operación

Agilent Technologies

Agilent Technologies 8156A Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies 93000 SOC Series Guía de instalación

Agilent Technologies

Agilent Technologies InfiniiVision 3000 X-Series Manual

Agilent Technologies

Agilent Technologies N4010A Instrucciones de instalación y funcionamiento

Agilent Technologies

Agilent Technologies U1583A Manual de usuario

Agilent Technologies

Agilent Technologies 16034E Manual de operación

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manual de usuario

Ritmix

Ritmix RAT-701 Manual de usuario