Agilent Technologies Infiniium Manual de usuario

HP/Agilent/Keysight MSO8104A Manual

Get Pricing & Availability at

ApexWaves.com

Call Today: 1-800-915-6216

Email: sales@apexwaves.com

https://www.apexwaves.com/oscilloscopes/keysight-technologies/8000-series/MSO8104A

Agilent Technologies

Infiniium

User’s Quick Start Guide

Publication number D8104-97003

January 2006

Infiniium Oscilloscopes

In This Book

This book gives you the information you need to begin using the Infiniium

Oscilloscopes. It contains four chapters:

Setting up the Oscilloscope Chapter 1 contains inspection, power

requirements, air flow, and setup information.

Working in Comfort Chapter 2 contains recommendations for working

comfortably and safely while operating the Infiniium Oscilloscope.

Using the Oscilloscope Chapter 3 gives an overview of the front panel and

the graphical user interface, and tells you how to perform basic operations with

the oscilloscope.

Using the Built-In Information System Chapter 4 describes the built-in

information system contents and navigation. The built-in information system

contains all of the information that is generally found in a User’s Guide.

• For detailed information on how the oscilloscope makes measurements and

how to use the oscilloscope, see the built-in information system in the

oscilloscope.

• For information on programming the oscilloscope using a computer with a

GPIB interface card or LAN interface card, see the Oscilloscopes

Programmer’s Reference for your model number oscilloscope found in the

Infiniium Information System.

• For information on testing and servicing the oscilloscope, see the Service

Guide manual for your model number oscilloscope found in Infiniium

Information System.

Contents

Contents-1

1 Setting Up the Oscilloscope

To inspect package contents 1-3

To inspect options and accessories 1-6

To connect power 1-11

To connect the mouse, the keyboard, a LAN cable, a USB device, a printer,

and a GPIB cable 1-15

To connect oscilloscope probes 1-17

To connect SMA Cables 1-20

To connect the digital probe 1-21

Digital probe lead set 1-22

To tilt the oscilloscope upward for easier viewing 1-26

To turn on the oscilloscope 1-27

To turn off the oscilloscope 1-28

To verify basic operation for the 80000B series oscilloscope 1-29

To verify basic operation for the 8000A series oscilloscope 1-31

Installing application programs on Infiniium 1-33

Changing Windows System Settings 1-34

To clean the oscilloscope 1-35

2 Working in Comfort

About Repetitive Strain Injury 2-3

Mice and Other Input Devices 2-4

3 Using the Oscilloscope

Front Panel 3-4

Acquisition and General Controls 3-5

Horizontal Controls 3-5

Trigger Controls 3-5

Vertical Controls 3-5

Marker and Measurement Controls 3-6

To set the oscilloscope to a known starting condition 3-7

To start and stop waveform acquisition 3-8

To clear the waveform display 3-9

To turn an analog channel on or off 3-10

To turn digital channels on or off 3-11

To change input impedance and input coupling 3-12

To adjust analog channel’s vertical scale and offset 3-13

To adjust digital channel’s vertical size and offset 3-14

To adjust sweep speed and horizontal position 3-15

To magnify a part of the waveform using delayed sweep 3-16

To set the oscilloscope to trigger on an edge 3-17

To use the markers 3-19

To use the quick measurements 3-20

To reinitialize the oscilloscope 3-21

Graphical User Interface 3-23

To perform basic user interface operations 3-30

Contents

Contents-2

To select a command from the menu bar 3-33

To select a command from a context-sensitive menu 3-34

To start and stop waveform acquisition 3-37

To clear the waveform display 3-38

To print the screen 3-39

To change waveform brightness 3-40

To turn a channel on or off 3-41

To adjust the vertical offset 3-42

To adjust vertical scaling 3-44

To access the channel setup 3-45

To set the horizontal reference point 3-46

To adjust sweep speed 3-47

To adjust horizontal position 3-48

To access the horizontal setup 3-49

To zoom on a section of the waveform 3-50

To move the markers using the graphical interface 3-52

To make a measurement on a waveform 3-54

To access the trigger setup 3-56

To set an edge trigger 3-57

To set dialog box preferences 3-58

To recover your Infiniium hard disk 3-61

To calibrate the touch screen 3-64

To enable or disable the touch screen 3-65

4 Using the Built-In Information System

To access the information system 4-4

Topic Types 4-7

To navigate through the information system 4-9

To access context-sensitive information 4-10

Setting Up the Oscilloscope

1-2

Setting Up the Oscilloscope

This chapter shows you how to set up your Infiniium oscilloscope,

connect power and accessories, and verify general operation.

Setting Up the Oscilloscope

To inspect package contents

1-3

To inspect package contents

❏Inspect the shipping container for damage.

Keep a damaged shipping container or cushioning material until you have

inspected the contents of the shipment for completeness and have checked the

oscilloscope mechanically and electrically.

❏Verify that you received the following items in the Infiniium Oscilloscope

packaging.

• Infiniium Oscilloscope

•Mouse

• Touchscreen Stylus

• 10073C 10:1 10 MΩpassive probes (one for each analog channel on 8000A

series models only)

• Digital Probe Kit (MSO models only)

• Calibration Cable (80000B series models only)

• SMA to Precision BNC Adaptors (80000B series models only)

• Accessory Pouch

• Front Panel Cover

• Keyboard

•Powercord

• Probe De-skew and Performance Verification Kit (80000B series models

only)

•User’s Quick Start Guide

See the following figures for your model of Infiniium Oscilloscope. (See table

1-4 for the power cord.) If anything is missing, contact your nearest Agilent

Technologies Sales Office. If the shipment was damaged, contact the carrier,

then contact the nearest Agilent Technologies Sales Office.

❏Inspect the oscilloscope.

• If there is mechanical damage or a defect, or if the oscilloscope does not

operate properly or does not pass performance tests, notify your Agilent

Technologies Sales Office.

• If the shipping container is damaged, or the cushioning materials show signs

of stress, notify the carrier and your Agilent Technologies Sales Office. Keep

the shipping materials for the carrier’s inspection. The Agilent Technologies

Sales Office will arrange for repair or replacement at Agilent’s option without

waiting for claim settlement.

Setting Up the Oscilloscope

To inspect package contents

1-4

Figure 1-1

Package Contents for the 80000B Series Infiniium Oscilloscopes

Infiniium Oscilloscope

with Accessory Pouch

User’s Quick Start Guide

Mouse

Keyboard

Calibration Cable

SMA to

Precision

BNC

Adaptors

(2)

Probe Deskew and

Performance

Verification Kit

Touchscreen Stylus

Front Panel

Cover

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de Agilent Technologies

Agilent Technologies

Agilent Technologies 85052C Manual

Agilent Technologies

Agilent Technologies InfiniiVision 5000 Series Manual de usuario

Agilent Technologies

Agilent Technologies InfiniiVision 6000 Series Manual de usuario

Agilent Technologies

Agilent Technologies 85105A Option 50 Manual de instalación y operación

Agilent Technologies

Agilent Technologies 54621A Manual de usuario

Agilent Technologies

Agilent Technologies InfiniiVision 7000B Series Manual de usuario

Agilent Technologies

Agilent Technologies Infiniium DCA Manual

Agilent Technologies

Agilent Technologies 8960 Manual de instrucciones

Agilent Technologies

Agilent Technologies J2126A Manual de instalación y operación

Agilent Technologies

Agilent Technologies 8960 Series 10 Manual de usuario

Agilent Technologies

Agilent Technologies MSO8104A Guía de inicio rápido

Agilent Technologies

Agilent Technologies 8960 Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies 16043A Manual de operación

Agilent Technologies

Agilent Technologies Auroraduet N1726A Manual de usuario

Agilent Technologies

Agilent Technologies DisplayPort Manual de instalación y funcionamiento

Agilent Technologies

Agilent Technologies 37907A Guía de instalación

Agilent Technologies

Agilent Technologies 11644A Series Manual

Agilent Technologies

Agilent Technologies InfiniiVision 7000A Series Manual

Agilent Technologies

Agilent Technologies U1602A Manual

Agilent Technologies

Agilent Technologies InfiniiVision 6000 Series Manual de usuario

Agilent Technologies

Agilent Technologies 16451B Manual de usuario

Agilent Technologies

Agilent Technologies E6001A Manual de usuario

Agilent Technologies

Agilent Technologies N9360A Manual de usuario

Agilent Technologies

Agilent Technologies N9360A Manual del propietario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manual de usuario

Ritmix

Ritmix RAT-701 Manual de usuario