Agilent Technologies InfiniiVision 2000 X-Series Manual de usuario

Agilent InfiniiVision

2000 X-Series

Oscilloscopes

User's Guide

2 Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

75015-97034

Edition

Fifth edition, July 2012

Printed in Malaysia

Agilent Technologies, Inc.

1900 Garden of the Gods Road

Colorado Springs, CO 80907 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connec-

tion with the furnishing, use, or per-

formance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of a

U.S. Government prime contract or subcon-

tract, Software is delivered and licensed as

“Commercial computer software” as

defined in DFAR 252.227-7014 (June 1995),

or as a “commercial item” as defined in FAR

2.101(a) or as “Restricted computer soft-

ware” as defined in FAR 52.227-19 (June

1987) or any equivalent agency regulation or

contract clause. Use, duplication or disclo-

sure of Software is subject to Agilent Tech-

nologies’ standard commercial license

terms, and non-DOD Departments and

Agencies of the U.S. Government will

receive no greater than Restricted Rights as

defined in FAR 52.227-19(c)(1-2) (June

1987). U.S. Government users will receive

no greater than Limited Rights as defined in

FAR 52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November 1995), as

applicable in any technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

Print History

75015-97000, January 2011

75015-97011, February 2011

75015-97012, June 2011

75015-97023, March 2012

75015-97034, July 2012

Trademarks

Java is a U.S. trademark of Sun Microsys-

tems, Inc.

Sun, Sun Microsystems, and the Sun Logo

are trademarks or registered trademarks of

Sun Microsystems, Inc. in the U.S. and other

countries.

Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 3

InfiniiVision 2000 X-Series Oscilloscopes—At a Glance

The Agilent InfiniiVision 2000 X- Series oscilloscopes deliver these features:

• 70 MHz, 100 MHz, and 200 MHz bandwidth models.

• 2- and 4- channel digital storage oscilloscope (DSO) models.

• 2+8- channel and 4+8-channel mixed- signal oscilloscope (MSO) models.

Table 1 2000 X-Series Model Numbers, Bandwidths

Bandwidth 70MHz 100MHz 200MHz

2-Channel + 8 Logic

Channels MSO

MSO-X 2002A MSO-X 2012A MSO-X 2022A

4-Channel + 8 Logic

Channels MSO

MSO-X 2004A MSO-X 2014A MSO-X 2024A

2-Channel DSO DSO-X 2002A DSO-X 2012A DSO-X 2022A

4-Channel DSO DSO-X 2004A DSO-X 2014A DSO-X 2024A

4 Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide

An MSO lets you debug your mixed- signal designs using analog signals

and tightly correlated digital signals simultaneously. The 8 digital

channels have a 1 GSa/s sample rate, with a 50 MHz toggle rate.

•8.5inchWVGAdisplay.

• Interleaved 2 GSa/s or non- interleaved 1 GSa/s sample rate.

• Interleaved 100 Kpts or non- interleaved 50 Kpts MegaZoom IV memory

for the fastest waveform update rates, uncompromised.

• All knobs are pushable for making quick selections.

• Trigger types: edge, pulse width, pattern, and video.

• Math waveforms: add, subtract, multiply, and FFT.

• Reference waveforms (2) for comparing with other channel or math

waveforms.

• Many built- in measurements.

• Built- in license- enabled waveform generator with: sine, square, ramp,

pulse, DC, noise.

• USB ports make printing, saving and sharing data easy.

• Optional LAN/VGA module for connecting to a network and displaying

the screen on a different monitor.

• Optional GPIB module.

• A Quick Help system is built into the oscilloscope. Press and hold any

key to display Quick Help. Complete instructions for using the quick

help system are given in “Access the Built-In Quick Help" on page 40.

For more information about InfiniiVision oscilloscopes, see:

"www.agilent.com/find/scope"

Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 5

In This Guide

This guide shows how to use the InfiniiVision 2000 X-Series oscilloscopes.

When unpacking and using the

oscilloscope for the first time, see:

•Chapter 1, “Getting Started,” starting on page 19

When displaying waveforms and

acquired data, see:

•Chapter 2, “Horizontal Controls,” starting on page 43

•Chapter 3, “Vertical Controls,” starting on page 55

•Chapter 4, “Math Waveforms,” starting on page 63

•Chapter 5, “Reference Waveforms,” starting on page

•Chapter 6, “Digital Channels,” starting on page 81

•Chapter 7, “Display Settings,” starting on page 101

•Chapter 8, “Labels,” starting on page 107

When setting up triggers or changing

how data is acquired, see:

•Chapter 9, “Triggers,” starting on page 113

•Chapter 10, “Trigger Mode/Coupling,” starting on

page 135

•Chapter 11, “Acquisition Control,” starting on page 143

Making measurements and analyzing

data:

•Chapter 12, “Cursors,” starting on page 159

•Chapter 13, “Measurements,” starting on page 169

•Chapter 14, “Mask Testing,” starting on page 189

•Chapter 15, “Digital Voltmeter,” starting on page 201

When using the built-in waveform

generator, see:

•Chapter 16, “Waveform Generator,” starting on page

205

When saving, recalling, or printing,

see:

•Chapter 17, “Save/Recall (Setups, Screens, Data),”

starting on page 217

•Chapter 18, “Print (Screens),” starting on page 231

When using the oscilloscope's utility

functions or web interface, see:

•Chapter 19, “Utility Settings,” starting on page 237

•Chapter 20, “Web Interface,” starting on page 257

For reference information, see: •Chapter 21, “Reference,” starting on page 273

6 Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide

TIP

Abbreviated instructions for pressing a series of keys and softkeys

Instructions for pressing a series of keys are written in an abbreviated manner. Instructions

for pressing [Key1], then pressing Softkey2, then pressing Softkey3 are abbreviated as

follows:

Press [Key1]> Softkey2 > Softkey3.

The keys may be a front panel [Key] or a Softkey. Softkeys are the six keys located directly

below the oscilloscope display.

Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 7

Contents

InfiniiVision 2000 X-Series Oscilloscopes—At a Glance 3

In This Guide 5

1 Getting Started

Inspect the Package Contents 19

Install the Optional LAN/VGA or GPIB Module 22

Tilt the Oscilloscope for Easy Viewing 22

Power-On the Oscilloscope 23

Connect Probes to the Oscilloscope 24

Maximum input voltage at analog inputs 24

Do not float the oscilloscope chassis 24

Input a Waveform 25

Recall the Default Oscilloscope Setup 25

Use Auto Scale 26

Compensate Passive Probes 27

Learn the Front Panel Controls and Connectors 28

Front Panel Overlays for Different Languages 35

Learn the Rear Panel Connectors 37

Learn the Oscilloscope Display 38

Access the Built-In Quick Help 40

8 Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide

2 Horizontal Controls

To adjust the horizontal (time/div) scale 44

To adjust the horizontal delay (position) 45

Panning and Zooming Single or Stopped Acquisitions 46

To change the horizontal time mode (Normal, XY, or Roll) 47

XY Time Mode 48

To display the zoomed time base 50

To change the horizontal scale knob's coarse/fine adjustment

setting 52

To position the time reference (left, center, right) 52

Navigating the Time Base 53

To navigate time 53

To navigate segments 53

3 Vertical Controls

To turn waveforms on or off (channel or math) 56

To adjust the vertical scale 57

To adjust the vertical position 57

To specify channel coupling 57

To specify bandwidth limiting 58

To change the vertical scale knob's coarse/fine adjustment

setting 58

To invert a waveform 59

Setting Analog Channel Probe Options 59

To specify the channel units 60

To specify the probe attenuation 60

To specify the probe skew 61

Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide 9

4MathWaveforms

To display math waveforms 63

To perform a transform function on an arithmetic operation 64

To adjust the math waveform scale and offset 65

Units for Math Waveforms 65

Math Operators 66

Add or Subtract 66

Multiply or Divide 67

Math Transforms 68

FFT Measurement 68

5 Reference Waveforms

To save a waveform to a reference waveform location 77

To display a reference waveform 78

To scale and position reference waveforms 79

To adjust reference waveform skew 79

To display reference waveform information 80

To save/recall reference waveform files to/from a USB storage

device 80

6 Digital Channels

To connect the digital probes to the device under test 81

Probe cable for digital channels 82

Acquiring waveforms using the digital channels 85

To display digital channels using AutoScale 85

Interpreting the digital waveform display 86

10 Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide

To change the displayed size of the digital channels 87

To switch a single channel on or off 88

To switch all digital channels on or off 88

To switch groups of channels on or off 88

To change the logic threshold for digital channels 88

To reposition a digital channel 89

To display digital channels as a bus 90

Digital channel signal fidelity: Probe impedance and

grounding 93

Input Impedance 94

Probe Grounding 96

Best Probing Practices 98

To replace digital probe leads 98

7 Display Settings

To adjust waveform intensity 101

To set or clear persistence 103

To clear the display 104

To select the grid type 104

To adjust the grid intensity 105

To freeze the display 105

8Labels

To turn the label display on or off 107

To assign a predefined label to a channel 108

To define a new label 109

To load a list of labels from a text file you create 110

Otros manuales para InfiniiVision 2000 X-Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de Agilent Technologies

Agilent Technologies

Agilent Technologies Ininiium 90000 Manual de usuario

Agilent Technologies

Agilent Technologies 37907A Guía de instalación

Agilent Technologies

Agilent Technologies e6601a Instrucciones de instalación y funcionamiento

Agilent Technologies

Agilent Technologies 54621A Manual de usuario

Agilent Technologies

Agilent Technologies 85056D Manual

Agilent Technologies

Agilent Technologies 3000 Series Manual

Agilent Technologies

Agilent Technologies Infiniium 9000 Series Manual de usuario

Agilent Technologies

Agilent Technologies E5035A Manual de usuario

Agilent Technologies

Agilent Technologies 8960 Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies 16451B Manual de usuario

Agilent Technologies

Agilent Technologies 16048A Manual de operación

Agilent Technologies

Agilent Technologies ProBER 2 Instrucciones de montaje

Agilent Technologies

Agilent Technologies 16194A Manual de operación

Agilent Technologies

Agilent Technologies 16191A Manual de operación

Agilent Technologies

Agilent Technologies E4406A Manual de usuario

Agilent Technologies

Agilent Technologies 81250 Manual de usuario

Agilent Technologies

Agilent Technologies 5DX II Series Manual de usuario

Agilent Technologies

Agilent Technologies Infinium DCA 86100A Manual de usuario

Agilent Technologies

Agilent Technologies 54610B Manual

Agilent Technologies

Agilent Technologies 16047A Manual de operación

Agilent Technologies

Agilent Technologies E4406A VSA Series Manual de instalación y operación

Agilent Technologies

Agilent Technologies 7683 Manual de usuario

Agilent Technologies

Agilent Technologies Infiniium 80000 Series Manual de usuario

Agilent Technologies

Agilent Technologies 4072A Advanced Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manual de usuario

Ritmix

Ritmix RAT-701 Manual de usuario