Agilent Technologies 1000A Series Manual de usuario
s1
Agilent 1000A Series
Oscilloscopes
Service Guide
Agilent 1000A Series Oscilloscopes Service Guide
Notices
© Agilent Technologies, Inc. 2009, 2013
No part of this manual may be reproduced in
any form or by any means (including elec-
tronic storage and retrieval or translation
into a foreign language) without prior agree-
ment and written consent from Agilent
Technologies, Inc. as governed by United
States and international copyright laws.
Manual Part Number
54130-97015
Edition
Third Edition, April 2013
Available in electronic format only
Agilent Technologies, Inc.
1900 Garden of the Gods Road
Colorado Springs, CO 80907 USA
Warranty
The material contained in this docu-
ment is provided “as is,” and is sub-
ject to being changed, without notice,
in future editions. Further, to the max-
imum extent permitted by applicable
law, Agilent disclaims all warranties,
either express or implied, with regard
to this manual and any information
contained herein, including but not
limited to the implied warranties of
merchantability and fitness for a par-
ticular purpose. Agilent shall not be
liable for errors or for incidental or
consequential damages in connec-
tion with the furnishing, use, or per-
formance of this document or of any
information contained herein. Should
Agilent and the user have a separate
written agreement with warranty
terms covering the material in this
document that conflict with these
terms, the warranty terms in the sep-
arate agreement shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accor-
dance with the terms of such license.
Restricted Rights Legend
U.S. Government Restricted Rights. Soft-
ware and technical data rights granted to
the federal government include only those
rights customarily provided to end user cus-
tomers. Agilent provides this customary
commercial license in Software and techni-
cal data pursuant to FAR 12.211 (Technical
Data) and 12.212 (Computer Software) and,
for the Department of Defense, DFARS
252.227-7015 (Technical Data - Commercial
Items) and DFARS 227.7202-3 (Rights in
Commercial Computer Software or Com-
puter Software Documentation).
Safety Notices
CAUTION
A CAUTION notice denotes a haz-
ard. It calls attention to an operat-
ing procedure, practice, or the like
that, if not correctly performed or
adhered to, could result in damage
to the product or loss of important
data. Do not proceed beyond a
CAUTION notice until the indicated
conditions are fully understood and
met.
WARNING
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly per-
formed or adhered to, could result
in personal injury or death. Do not
proceed beyond a WARNING
notice until the indicated condi-
tions are fully understood and
met.
See also Appendix A, “Safety Notices,”
starting on page 41.
Agilent 1000A Series Oscilloscopes Service Guide 3
Agilent 1000A Series Oscilloscopes—At a Glance
The Agilent 1000A Series oscilloscopes are low-cost portable
digital storage oscilloscopes (DSOs) that deliver these
powerful features:
• Two and four- channel, 60 MHz, 100 MHz, and 200 MHz
bandwidth models.
• Bright 5.7 inch QVGA (320 x 240) TFT color LCD display
and small footprint (to save bench space).
•Upto2GSa/ssamplerate.
• Up to 20 kpts memory.
• Up to 400 wfms/s refresh rate.
• Automatic voltage and time measurements (22) and
cursor measurements.
• Powerful triggering (edge, pulse width, video, pattern, and
alternate modes) with adjustable sensitivity (to filter
noise and avoid false triggers).
• Math function waveforms: add, subtract, multiply, FFT.
• USB ports (2 host, 1 device) for easy printing, saving, and
sharing of waveforms, setups, screen BMP files, and CSV
data files.
• Internal storage for 10 waveforms and 10 setups.
• Special digital filter and waveform recorder.
• Built- in 6- digit hardware frequency counter.
• Multi- language (11) user interface menus and built- in
help.
Table 1 Agilent 1000A Series Oscilloscope Models
Channels
Input Bandwidth (Maximum Sample Rate, Memory)
200 MHz
(1-2 GSa/s,
10-20 kpts)
100 MHz
(1-2 GSa/s,
10-20 kpts)
60 MHz
(1-2 GSa/s,
10-20 kpts)
4 channel DSO1024A DSO1014A DSO1004A
2 channel DSO1022A DSO1012A DSO1002A
4 Agilent 1000A Series Oscilloscopes Service Guide
In This Book
This guide contains service information for the Agilent
1000A Series oscilloscopes.
1Service
Describes oscilloscope maintanance, performance testing, and
what to do if your oscilloscope requires service.
Agilent 1000A Series Oscilloscopes Service Guide 5
Contents
Agilent 1000A Series Oscilloscopes—At a Glance 3
In This Book 4
Figures 7
Tables 9
1Service11
Cleaning the Oscilloscope 12
Testing Performance 13
Before Testing Performance 14
To test DC gain accuracy 16
To test analog bandwidth, maximum frequency 21
To test time scale accuracy 29
To test trigger sensitivity 32
Performance Test Record 35
Returning the Oscilloscope to Agilent for Service 39
Contacting Agilent 40
ASafetyNotices41
Warnings 41
Safety Symbols 42
Index 43
6 Agilent 1000A Series Oscilloscopes Service Guide
Contents
Agilent 1000A Series Oscilloscopes Service Guide 7
Figures
Figure 1. Averages Menu Item 17
Figure 2. Connecting Equipment for DC Gain Accuracy Test 18
Figure 3. Vavg Menu Item 19
Figure 4. Connecting Equipment for Maximum Frequency Check Test 23
Figure 5. Channel 1 Vertical Scale Setting 24
Figure 6. Channel 1 Horizontal Scale Setting 24
Figure 7. Averages Menu Item 25
Figure 8. Signal Generator Waveform 26
Figure 9. Connecting Equipment for Time Scale Accuracy Test 30
Figure 10. Connecting Equipment for Trigger Sensitivity Test 33
8 Agilent 1000A Series Oscilloscopes Service Guide
Figures
Agilent 1000A Series Oscilloscopes Service Guide 9
Tables
Table 1. Agilent 1000A Series Oscilloscope Models 3
Table 2. Equipment Required to Perform All Tests 14
Table 3. DC Gain Accuracy Specification 16
Table 4. Equipment Required for DC Gain Accuracy Test 16
Table 5. Analog Bandwidth Specification 21
Table 6. Equipment Required for Analog Bandwidth Test 22
Table 7. Oscilloscope Models and Signal Generator Frequency 27
Table 8. Time Scale Accuracy Specification 29
Table 9. Equipment Required for Time Scale Accuracy Test 30
Table 10. Trigger Sensitivity Specification 32
Table 11. Equipment Required for Trigger Sensitivity Test 32
Table 12. Performance Test Information 35
Table 13. DC Gain Test 35
Table 14. Analog Bandwidth - Maximum Frequency Check 37
Table 15. Time Scale Accuracy 38
Table 16. Trigger Sensitivity 38
10 Agilent 1000A Series Oscilloscopes Service Guide
Tables
Tabla de contenidos
Otros manuales de Equipo de prueba de Agilent Technologies
Agilent Technologies
Agilent Technologies 16191A Manual de operación
Agilent Technologies
Agilent Technologies ENA Series Manual de usuario
Agilent Technologies
Agilent Technologies 86100A Cómo utilizar
Agilent Technologies
Agilent Technologies 85052C Manual
Agilent Technologies
Agilent Technologies InfiniiVision 6000 Series Manual de usuario
Agilent Technologies
Agilent Technologies 85052D Manual
Agilent Technologies
Agilent Technologies U2701A Manual de usuario
Agilent Technologies
Agilent Technologies 87511A Manual de operación
Agilent Technologies
Agilent Technologies 83480A Manual de usuario
Agilent Technologies
Agilent Technologies 8960 Manual de instalación y operación
Agilent Technologies
Agilent Technologies 35670A Manual de usuario
Agilent Technologies
Agilent Technologies E5022B Manual del propietario
Agilent Technologies
Agilent Technologies 85056D Manual
Agilent Technologies
Agilent Technologies 54641A Manual de usuario
Agilent Technologies
Agilent Technologies ProBER 2 Manual de usuario
Agilent Technologies
Agilent Technologies J2126A Manual de instalación y operación
Agilent Technologies
Agilent Technologies 1100 Series Manual de usuario
Agilent Technologies
Agilent Technologies 54621A Manual de usuario
Agilent Technologies
Agilent Technologies InfiniiVision 7000B Series Manual de usuario
Agilent Technologies
Agilent Technologies HP 10070A Manual de usuario
