Agilent Technologies 355 SCD Manual de usuario

Agilent Technologies

Agilent 355 SCD and 255 NCD

Quick Reference Guide

Detector Startup

Complete Startup (from total shut down)

1Turn on the detector and establish carrier gas flow.

2Turn on the vacuum pump with the toggle button located on the front panel

of the Detector.

3Turn the instrument from Standby to On, and allow the system to evacuate

for approximately 1 minute.

4Turn on the air to the ozone generator and set the regulator inside the front

door of the Detector to between 3 and 6 psig.

5Turn on the ozone generator.

6Turn on the Interface Controller with the toggle on the back panel of the

box.

Daily Startup (from daily shutdown)

1Turn the instrument from Standby to On, and allow the system to evacuate

for approximately 1 minute.

2Turn on the air to the ozone generator and set the regulator inside the front

door of the Detector to between 3 and 6 psig.

3Turn on the ozone generator.

Detector Shutdown

Daily Shutdown (Standby Mode)

1Turn off the ozone generator with the button on the front of the Detector.

2Turn down the oxidant flow to 0 with the regulator located in the front door

of the Detector.

3Turn the Detector power to Standby.

It is recommended to leave the vacuum pump and Dual Plasma Controller

operating at all times.

2Quick Reference Guide

Agilent 355 SCD and 255 NCD

Complete Shutdown (long periods of time)

1Turn off the ozone generator with the button on the front of the Detector.

2Turn down the air flow to 0 with the regulator located in the front door of

the Detector.

3Turn the Detector power to Standby.

4Turn off the power switch on the Controller and allow at least 15 minutes

for the burner to cool.

5Turn off the vacuum pump.

6Turn off the Detector gases.

Table 1 Typical Operating Conditions

*Oil-free pump

Table 2 Maintenance Schedule

*Operating life is based on the total time logged during operation of the 355 SCD with the burner and ozone

generator on.

Condition SCD NCD

Detector Pressure (Torr) 4-8 (6-12*) 4-10

Dual Plasma Controller Pressure (Torr) 300-400 100-250

Burner Temperature (°C) 800 900-950

Hydrogen Flow Rate (sccm) 40-50 4-6

Oxidant Flow Rate (sccm) 60-65 (air) 8-12 (oxygen)

Background Noise (mV) 0.3-2.0 0.3-1.0

Component/Material Operating Life*

Pump Oil ~3 month

Oil Coalescing Filter ~3 months

Chemical Trap ~3 months

Agilent 355 SCD and 255 NCD

Quick Reference Guide 3

Agilent Technologies

©Agilent Technologies, Inc. 2007

Printed in USA

First edition, March 2007

Agilent Technologies, Inc.

2850 Centerville Road

Wilmington, DE 19808-1610 USA

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sensor de seguridad de Agilent Technologies

Agilent Technologies

Agilent Technologies G6600-90006 Manual de usuario

Agilent Technologies

Agilent Technologies VS Series Manual de usuario

Agilent Technologies

Agilent Technologies 1200 Infinity Series Manual de usuario

Agilent Technologies

Agilent Technologies 8355 Sulfur Manual de usuario

Agilent Technologies

Agilent Technologies G2621-64000 Manual de usuario

Agilent Technologies

Agilent Technologies Helium Manual de usuario

Agilent Technologies

Agilent Technologies 1200 Infinity Series Manual de usuario

Agilent Technologies

Agilent Technologies 8355 Sulfur Manual de usuario

Agilent Technologies

Agilent Technologies 1100 Series Manual de usuario

Agilent Technologies

Agilent Technologies G3388A Manual de usuario

Agilent Technologies

Agilent Technologies CrossLab CS Manual de usuario

Agilent Technologies

Agilent Technologies 85025A Manual

Agilent Technologies

Agilent Technologies 1100 Series Manual de usuario

Agilent Technologies

Agilent Technologies VS Series Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity II Manual de usuario

Agilent Technologies

Agilent Technologies G2334A Manual de usuario

Agilent Technologies

Agilent Technologies G8610 Series Manual de usuario

Agilent Technologies

Agilent Technologies G3437A Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity Manual de usuario

Agilent Technologies

Agilent Technologies 85037A Manual de servicio

Agilent Technologies

Agilent Technologies 1200 series Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity Manual de usuario

Agilent Technologies

Agilent Technologies InfinityLab LC Series Manual de usuario

Agilent Technologies

Agilent Technologies 5977C Series Manual de usuario

Manuales populares de Sensor de seguridad de otras marcas

THORLABS

THORLABS PDA10JT Manual de usuario

Waeco

Waeco UV-DETECT Manual de usuario

Intermatic

Intermatic IOS-DSIMF Manual de usuario

urmet domus

urmet domus 1083 Manual de usuario

Siemens

Siemens AZL66 Series Manual de usuario

BTI

BTI Profiline Multi Finder Manual de usuario

Challenger

Challenger SL01 Manual de usuario

DMP Electronics

DMP Electronics 1122INT Manual de usuario

Rielta

Rielta Ladoga MK-RK Manual de usuario

Mirion Technologies

Mirion Technologies ACCURAD PRD Manual de usuario

Bosch

Bosch DS835 Manual de usuario

DBI SALA

DBI SALA EZ Stop Manual del operador

Lamptime

Lamptime ST05C Manual de usuario

Ubiquiti

Ubiquiti MFI-MSC Manual de usuario

Subsite

Subsite 910R Instrucciones de instalación

Satel

Satel OPAL Pro Manual de usuario

Aleph

Aleph XC-1XTEU Manual de usuario

Pima

Pima LARIS QUAD Manual de usuario