Agilent Technologies U3402A Manual

Agilent Technologies

Agilent U3402A

5 1/2 Digit Dual Display

Multimeter

User’s and Service Guide

U3402-90001.book Page i Friday, July 24, 2009 4:04 PM

Downloaded from Elcodis.com electronic components distributor

ii U3402A User’s and Service Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent

Technologies, Inc. as governed by United

States and international copyright laws.

Manual Part Number

U3402-90001

Edition

First Edition, May 29, 2009

Printed in Malaysia

Agilent Technologies, Inc.

5301 Stevens Creek Blvd.

Santa Clara, CA 95051 USA

Warranty

The material contained in this docu-

ment is provided “as is,” and is sub-

ject to being changed, without notice,

in future editions. Further, to the max-

imum extent permitted by applicable

law, Agilent disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Agilent shall not be

liable for errors or for incidental or

consequential damages in connec-

tion with the furnishing, use, or per-

formance of this document or of any

information contained herein. Should

Agilent and the user have a separate

written agreement with warranty

terms covering the material in this

document that conflict with these

terms, the warranty terms in the sep-

arate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Agilent provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly per-

formed or adhered to, could result

in personal injury or death. Do not

proceed beyond a WARNING

notice until the indicated condi-

tions are fully understood and

met.

U3402-90001.book Page ii Friday, July 24, 2009 4:04 PM

Downloaded from Elcodis.com electronic components distributor

U3402A User’s and Service Guide iii

Safety Symbols

The following symbol on the instrument and in the documentation

indicates precautions that must be taken to maintain safe operation of the

instrument.

Direct current (DC) Off (supply)

Alternating current (AC) On (supply)

Both direct and alternating current Caution, risk of electric shock

Three-phase alternating current Caution, risk of danger (refer to this

manual for specific Warning or Caution

information)

Earth (ground) terminal Caution, hot surface

Protective conductor terminal Out position of a bi-stable push control

Frame or chassis terminal In position of a bi-stable push control

Equipotentiality Equipment protected throughout by

double insulation or reinforced

insulation

IEC Measurement Category II. Inputs may

be connected to mains (up to 300 VAC)

under Category II overvoltage conditions.

CAT II

300 V

U3402-90001.book Page iii Friday, July 24, 2009 4:04 PM

Downloaded from Elcodis.com electronic components distributor

iv U3402A User’s and Service Guide

Regulatory Markings

The CE mark is a registered trademark

of the European Community. This CE

mark shows that the product complies

with all the relevant European Legal

Directives.

The C-tick mark is a registered

trademark of the Spectrum

Management Agency of Australia. This

signifies compliance with

the Australia EMC Framework

regulations under the terms of the

Radio Communication Act of 1992.

ICES/NMB-001 indicates that this ISM

device complies with the Canadian

ICES-001.

Cet appareil ISM est confomre a la

norme NMB-001 du Canada.

This instrument complies with the

WEEE Directive (2002/96/EC) marking

requirement. This affixed product label

indicates that you must not discard

this electrical/electronic product in

domestic household waste.

The CSA mark is a registered

trademark of the Canadian Standards

Association.

U3402-90001.book Page iv Friday, July 24, 2009 4:04 PM

Downloaded from Elcodis.com electronic components distributor

U3402A User’s and Service Guide v

General Safety Information

The following general safety precautions must be observed during all

phases of operation, service, and repair of this instrument. Failure to

comply with these precautions or with specific warnings elsewhere in this

manual violates safety standards of design, manufacture, and intended

use of the instrument. Agilent Technologies assumes no liability for the

customer’s failure to comply with these requirements.

WARNING

• Do not defeat power cord safety ground feature. Plug in to a grounded (earthed)

outlet.

• Do not use instrument in any manner that is not specified by the manufacturer.

• Double-check the instrument’s operation by measuring a known voltage.

• For current measurement, turn off circuit power before connecting the

instrument to the circuit. Always place the instrument in series with the circuit.

• When connecting probes, always connect the common test probe first. When

disconnecting probes, always disconnect the live test probe first.

• Do not measure more than the rated voltage (as marked on the multimeter)

between terminals, or between terminal and earth ground.

• Do not use repaired fuses or short-circuited fuse-holders. For continued

protection against fire, replace the line fuses only with fuses of the same voltage

and current rating and recommended type.

• Do not service or perform adjustments alone. Under certain conditions,

hazardous voltages may exist, even with the instrument switched off. To avoid

dangerous electric shock, service personnel must not attempt internal service or

adjustment unless another person, capable of rendering resuscitation or first aid,

is present.

• Do not substitute parts or modify instrument to avoid the danger of introducing

additional hazards. Return the instrument to Agilent Technologies Sales and

Service Office for service and repair to ensure the safety features are maintained.

• Do not operate damaged instrument as the safety protection features built into

this instrument may have been impaired, either through physical damage,

excessive moisture, or any other reason. Remove power and do not use the

instrument until safe operation can be verified by service-trained personnel. If

necessary, return the instrument to Agilent Technologies Sales and Service Office

for service and repair to ensure the safety features are maintained.

U3402-90001.book Page v Friday, July 24, 2009 4:04 PM

Downloaded from Elcodis.com electronic components distributor

vi U3402A User’s and Service Guide

CAUTION

• Turn off circuit power and discharge all high-voltage capacitors in the circuit before

you perform resistance, continuity, or diode tests.

• Use the correct terminals, functions, and range for your instrument.

• Do not measure voltage when current measurement is selected.

• Use the instrument with the cables provided.

• Repair or service that is not covered in this manual should only be performed by

qualified personnels.

U3402-90001.book Page vi Friday, July 24, 2009 4:04 PM

Downloaded from Elcodis.com electronic components distributor

U3402A User’s and Service Guide vii

Environmental Conditions

This instrument is designed for indoor use and in an area with low

condensation. The table below shows the general environmental

requirements for the instrument.

Environmental Conditions Requirements

Operating temperature Full accuracy from 0 °C to 50°C (Operating)

Operating humidity Full accuracy up to 80 % R.H. (relative humidity)

for temperature up to 28°C

Storage temperature –20 °C to 60 °C (Non-operating)

Altitude Operating up to 2,000 metres (6,562 feet)

Pollution degree Pollution Degree 2

CAUTION

The Agilent U3402A 5 1/2 digit dual display multimeter complies with

the following EMC requirements:

• IEC 61010-1:2001/EN61010-1:2001 (2nd Edition)

• Canada: CAN/CSA-C22.2 No. 61010-1-04

• USA: ANSI/UL 61010-1:2004

• IEC 61326-1:2005/EN 61326-1:2006

• Canada: ICES/NMB-001:2004

• Australia/New Zealand: AS/NZS CISPR11:2004

U3402-90001.book Page vii Friday, July 24, 2009 4:04 PM

Downloaded from Elcodis.com electronic components distributor

viii U3402A User’s and Service Guide

Waste Electrical and Electronic Equipment (WEEE) Directive

2002/96/EC

This instruction complies with the WEEE Directive (2002/96/EC) marking

requirement. This affixed product label indicates that you must not discard

this electrical/electronic product in domestic household waste.

Product Category:

With reference to the equipment types in the WEEE directive Annex 1, this

instrument is classified as a “Monitoring and Control Instrument” product.

The affixed product label is shown as below:

Do not dispose in domestic household waste

To return this unwanted instrument, contact your nearest Agilent office, or

visit

www.agilent.com/environment/product

for more information.

U3402-90001.book Page viii Friday, July 24, 2009 4:04 PM

Downloaded from Elcodis.com electronic components distributor

U3402A User’s and Service Guide ix

DECLARATION OF CONFORMITY

According to EN ISO/IEC 17050-1:2004

Manufacturer’s Name: Agilent Technologies Microwave Products (M) Sdn Bhd

Manufacturer’s Address:

Bayan Lepas Free Industrial Zone

11900 Penang, Malaysia

Declares under sole responsibility that the product as originally delivered:

Product Name: 5½ Digit Dual Display Multimeter (U3402A)

4½ Digit Dual Display Multimeter (U3401A)

Model Number: U3401A, U3402A

Product Option: This declaration covers all options of the above product(s)

complies with the essential requirements of the following applicable European Directives, and

carries the CE marking accordingly:

Low Voltage Directive (2006/95/EC)

EMC Directive (2004/108/EC)

and conforms with the following standards:

EMC Standards Limit

IEC61326-1:2005 / EN61326-1:2006

CISPR 11:2003 / EN 55011:2007 Group 1 Class A

IEC 61000-4-2:2001 / EN 61000-4-2:1995+A1:1998+A2:2001 4 kV CD, 8 kV AD

IEC 61000-4-3:2002 / EN 61000-4-3:2002 10 V/m (80 MHz-1.0 GHz)

3 V/m (1.4 GHz-2.0 GHz)

1 V/m (2.0 GHz-2.7 GHz)

IEC 61000-4-4:2004 / EN 61000-4-4:2004 1 kV signal lines, 2 kV power lines

IEC 61000-4-5:2001 / EN 61000-4-5:1995:A1:2001 1 kV line-line, 2 kV line-ground

IEC 61000-4-6:2003 / EN 61000-4-6:2007 3 V (0.15 MHz-80 MHz)

IEC 61000-4-11:2004 / EN 61000-4-11:2004 100% Dip (0.5 cycle, 1 cycle)

60% Dip (10 cycles)

30% Dip (25 cycles)

100% short interruptions (250 cycles)

Canada: ICES/NMB-001:2004

Australia/New Zealand: AS/NZS CISPR 11:2004

Safety

IEC 61010-1:2001 / EN 61010-1:2001

CAN/CSA-C22.2 No.61010-1-04

ANSI/UL61010-1:2004

Additional Information:

The product was tested in a typical configuration with Agilent Technologies test systems.

This DoC applies to above-listed products placed on the EU market after:

5-Mar-09

Date

Tay Eng Su

Quality Manager

For further information, please contact your local Agilent Technologies sales office, agent or distributor,

or Agilent Technologies Deutschland GmbH, Herrenberger Straße 130, 71034 Böblingen, Germany.

Template: A5971-5302-2, Rev. E.00 U3402A DoC Revision A

U3402-90001.book Page ix Friday, July 24, 2009 4:04 PM

Downloaded from Elcodis.com electronic components distributor

x U3402A User’s and Service Guide

Product Regulations

Standards Performance Criteria

IEC61326-1:2005 / EN61326-1:2006

CISPR 11:2003 / EN 55011:2007 Group 1 Class A

IEC 61000-4-2:2001 / EN 61000-4-2:1995+A1:1998+A2:2001 A

IEC 61000-4-3:2002 / EN 61000-4-3:2002 A

IEC 61000-4-4:2004 / EN 61000-4-4:2004 A

IEC 61000-4-5:2001 / EN 61000-4-5:1995:A1:2001 A

IEC 61000-4-6:2003 / EN 61000-4-6:2007 A

IEC 61000-4-11:2004 / EN 61000-4-11:2004

o100% Dip (0.5 cycle) A

o100% Dip (1 cycle) A

o60% Dip (10 cycles) B

o30% Dip (25 cycles) A

o100% Short Interruptions (250 cycles) B



Performance Criteria:

A Pass - Normal operation, no effect.

B Pass - Temporary degradation, self recoverable.

C Pass - Temporary degradation, operator intervention required.

D Fail - Not recoverable, component damage.

N/A – Not applicable

Notes:

Regulatory Information for Canada

ICES/NMB-001:2004

This ISM device complies with Canadian ICES-001.

Cet appareil ISM est confomre à la norme NMB-001 du Canada.

Regulatory Information for Australia/New Zealand

This ISM device complies with Australian/New Zealand AS/NZS CISPR11:2004

U3402-90001.book Page x Friday, July 24, 2009 4:04 PM

Downloaded from Elcodis.com electronic components distributor

Otros manuales para U3402A

Tabla de contenidos

Otros manuales de Multímetro de Agilent Technologies

Agilent Technologies

Agilent Technologies 8153A Manual de usuario

Agilent Technologies

Agilent Technologies U1272A Manual de usuario

Agilent Technologies

Agilent Technologies Agilent E1412A Manual de usuario

Agilent Technologies

Agilent Technologies Agile or Elusive Signals Using Manual

Agilent Technologies

Agilent Technologies 34410A Manual de usuario

Agilent Technologies

Agilent Technologies 34405A Manual

Agilent Technologies

Agilent Technologies 3458A Manual de uso y cuidado

Agilent Technologies

Agilent Technologies U1253B Manual de usuario

Agilent Technologies

Agilent Technologies U1251A Manual de usuario

Agilent Technologies

Agilent Technologies U2741A Manual de usuario

Agilent Technologies

Agilent Technologies 34405A Manual

Agilent Technologies

Agilent Technologies U1270 Series Manual de usuario

Agilent Technologies

Agilent Technologies E5071C Manual de instalación y funcionamiento

Agilent Technologies

Agilent Technologies 3458A Guía de inicio rápido

Agilent Technologies

Agilent Technologies Agilent 8163A Manual de usuario

Agilent Technologies

Agilent Technologies U1241B Manual de usuario

Agilent Technologies

Agilent Technologies U3606A Manual

Agilent Technologies

Agilent Technologies U3401A Manual de usuario

Agilent Technologies

Agilent Technologies 34450A 5 Digit Multimeter Manual de usuario

Agilent Technologies

Agilent Technologies U1241A Manual de usuario

Agilent Technologies

Agilent Technologies U1251A Manual de usuario

Agilent Technologies

Agilent Technologies U1253A Manual

Agilent Technologies

Agilent Technologies U1273A Manual de usuario

Agilent Technologies

Agilent Technologies U1252B Manual de usuario

Manuales populares de Multímetro de otras marcas

Fluke

Fluke 83 Manual de usuario

Hameg

Hameg HM 8012 Manual de usuario

Mastech

Mastech MY70 Manual de usuario

Steren

Steren MUL-300 Manual de usuario

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Manual de usuario

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Manual de usuario

PeakTech

PeakTech 4000 Manual de uso y cuidado

YOKOGAWA

YOKOGAWA 90050B Manual de usuario

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Manual de usuario

Fluke

Fluke 8846A Manual de operación y mantenimiento

Tempo Communications

Tempo Communications MM200 Manual de usuario

Elenco Electronics

Elenco Electronics CM-1555 Manual de usuario

Mastech

Mastech MS8238C Manual de usuario

SDAR

SDAR 830A, 830B, 830D, 830C Manual de usuario

RS PRO

RS PRO RS-9519BT Manual de usuario

BGS technic

BGS technic 8890 Manual de usuario

Amprobe

Amprobe Hexagon 60 Manual de usuario

Morris

Morris 57074 Manual de usuario