Agilent Technologies 8560 E-Series Manual de usuario

Quick Reference Guide

Agilent Technologies

8560 E-Series and EC-Series

Spectrum Analyzers

Manufacturing Part Number: 08560-90159

Printed in USA November 2000

Silicon Investigations

Repair Information - Contact Us

920-955-3693

www.siliconinvestigations.com

Notice.

The information contained in this document is sub ject to change without

notice.

AgilentTechnologies makes no warrantyof any kind with regard to

this material, including but not limited to, the implied warranties of

merchantability and tness for a particular purpose. AgilentTechnologies shall

not be liable for errors contained herein or for incidental or consequential

damages in connection with the furnishing, p erformance, or use of this

material.



written p ermission is prohibited, except as allowed under the copyrightlaws.

1400 FountaingroveParkway, Santa Rosa, CA 95403-1799, USA

Introduction

This Quick Reference Guide is a convenient reference for b oth manual and

automated measurements. It is provided for the exp erienced spectrum analyzer

user.

Chapter 1 gives an overview of front-panel keys and connectors, rear-panel

connectors, and display annotation.

Chapter 2 leads you through a simple measurement procedure.

Chapter 3 diagrams the front-panel key lo cation menus.

Chapter 4 do cuments front-panel key and softkey functions.

Chapter 5 do cuments programming commands and information.

Chapter 6 do cuments the error messages.

Appendix A provides simplied blo ck diagrams of the instruments.

For additional instrument information, consult the:

Agilent Technologies 8560 E-Series and EC-Series Spectrum Analyzers User's

Guide

Agilent Technologies 8560 E-Series and EC-Series Spectrum Analyzers

Calibration Guide

iii

Contents

1. InstrumentOverview

The FrontPanel . . . . . . . . . . . . . . . . . . . . . 1-2

Display Annotation . . . . . . . . . . . . . . . . . . . . 1-6

The Rear Panel . . . . . . . . . . . . . . . . . . . . . . 1-8

2. Making a Basic Measurement

Reference Level Calibration . . . . . . . . . . . . . . . . 2-6

3. MenuTrees

4. FrontPanel Key Functions

Finding the FrontPanel Key . . . . . . . . . . . . . . . . 4-2

Key Descriptions . . . . . . . . . . . . . . . . . . . . . 4-15

5. Programming Reference

Programming Commands (functional index) . . . . . . . . . 5-2

Key versus Programming Command . . . . . . . . . . . . . 5-22

Mass Memory Mo dule Commands . . . . . . . . . . . . . . 5-37

Programming Commands (alphab etical index) . . . . . . . . 5-42

Notation Conventions . . . . . . . . . . . . . . . . . . . 5-88

Syntax Conventions . . . . . . . . . . . . . . . . . . . . 5-89

Secondary Key Word Summary . . . . . . . . . . . . . . . 5-90

6. Error Messages

A. Blo ck Diagrams

Contents-1

Figures

1-1. 8560 E-Series and EC-Series FrontPanel . . . . . . . . . . 1-2

1-2. Display Annotation . . . . . . . . . . . . . . . . . . . 1-6

1-3. 8560 E-Series Rear Panel . . . . . . . . . . . . . . . . 1-8

1-4. 8560 EC-Series Rear Panel . . . . . . . . . . . . . . . . 1-9

2-1. 300 MHz Center Frequency . . . . . . . . . . . . . . . . 2-2

2-2. 20 MHz Frequency Span . . . . . . . . . . . . . . . . . 2-3

2-3. Activated Normal Marker . . . . . . . . . . . . . . . . 2-4

2-4.

10 dBm Reference Level . . . . . . . . . . . . . . . . 2-5

2-5. Peaked Signal to Reference Level . . . . . . . . . . . . . 2-7

Tables

1-1. Front-Panel Connector Data . . . . . . . . . . . . . . . 1-4

4-1. FrontPanel Softkey Access . . . . . . . . . . . . . . . . 4-2

4-2. Conversion-Loss Flatness Data . . . . . . . . . . . . . . 4-21

4-3. External Mixing Frequency Bands and Recommended

Harmonics (For Unpreselected External Mixers) . . . . . 4-25

5-1. FrontPanel Key Versus Command . . . . . . . . . . . . 5-22

5-2. Mass Memory Mo dule Commands . . . . . . . . . . . . . 5-37

6-1. Remote Operation Errors . . . . . . . . . . . . . . . . 6-2

6-2. Data and Other User-Generated Errors . . . . . . . . . . 6-4

Contents-2

Instrument Overview

This chapter introduces the front-panel and rear-panel keys and connectors on

the 8560 E-Series and EC-Series spectrum analyzers. Complete descriptions

of each front-panel function are in Chapter 5 of the 8560 E-Series and 8560

EC-Series User's Guide.

Instrument Overview 1-1

The Front Panel

Figure 1-1. 8560 E-Series and EC-Series Front Panel

1. FREQUENCY, SPAN, and AMPLITUDE are the fundamental functions for

most measurements. The HOLD key freezes the active function and holds it

at a set value until a function key is pressed again. HOLD also blanks the

softkey menu and expands the graticule display horizontally to ll the full

CRT.

2. INSTRUMENT STATE functions generally aect the state of the entire

spectrum analyzer, not just the state of a single function.

3. MARKER functions read out frequencies and amplitudes along the

spectrum analyzer trace, let you make relative measurements, automatically

lo cate the signal of highest amplitude on a trace, and tune the analyzer to

track a signal automatically.

4. CONTROL functions allowyou to adjust the resolution and video

bandwidths, the sweep time, and the display, and let you vary other

functions that control spectrum analyzer measurement capabilities.

1-2 Instrument Overview

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Agilent Technologies

Agilent Technologies

Agilent Technologies E4991A Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity Manual de usuario

Agilent Technologies

Agilent Technologies E4418B Manual de usuario

Agilent Technologies

Agilent Technologies PSA Series Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies 8702D Manual de usuario

Agilent Technologies

Agilent Technologies ESA-E E4407B Manual de instalación y operación

Agilent Technologies

Agilent Technologies DSOX4USBSQ USB 2.0 Manual de usuario

Agilent Technologies

Agilent Technologies 4291B Manual de usuario

Agilent Technologies

Agilent Technologies ESA E4401B Manual de instalación y operación

Agilent Technologies

Agilent Technologies u8903a Manual de usuario

Agilent Technologies

Agilent Technologies 16850 Series Manual de usuario

Agilent Technologies

Agilent Technologies Flow Tracker 1000 Manual de usuario

Agilent Technologies

Agilent Technologies FieldFox N9923AN Manual de usuario

Agilent Technologies

Agilent Technologies E444 AU Series Manual de usuario

Agilent Technologies

Agilent Technologies 86140B Series Manual de usuario

Agilent Technologies

Agilent Technologies EPM-P Series Manual de usuario

Agilent Technologies

Agilent Technologies N1911A Manual de usuario

Agilent Technologies

Agilent Technologies 54701A Manual

Agilent Technologies

Agilent Technologies 5977B Series Manual de usuario

Agilent Technologies

Agilent Technologies 4285A Manual de usuario

Agilent Technologies

Agilent Technologies varian 310-MS LC/MS Manual de usuario

Agilent Technologies

Agilent Technologies 4263B Manual de usuario

Agilent Technologies

Agilent Technologies PSA Series Manual de instalación y operación

Agilent Technologies

Agilent Technologies E8362B Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario