Agilent Technologies N9320B Manual de usuario



Agilent N9320B

RF Spectrum Analyzer

Quick Start Guide

N9320B Quick Start Guide

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or

translation into a foreign language) without

prior agreement and written consent from

Agilent Technologies, Inc. as governed by

United States and international copyright

laws.

Edition

First Edition

Printed in China, August 2008

Agilent Technologies, Inc.

Qianfeng Hi-Tech Industrial Park

Chengdu Hi-Tech Industrial Development

Zone(West District)

Chengdu, 611731, P.R.C

Warranty

The material contained in this

document is provided “as is,” and is

subject to being changed, without

notice, in future editions. Further, to

the maximum extent permitted by

applicable law, Agilent disclaims all

warranties, either express or implied,

with regard to this manual and any

information contained herein,

including but not limited to the

implied warranties of merchantability

and fitness for a particular purpose.

Agilent shall not be liable for errors

or for incidental or consequential

damages in connection with the

furnishing, use, or performance of

this document or of any information

contained herein. Should Agilent and

the user have a separate written

agreement with warranty terms

covering the material in this

document that conflict with these

terms, the warranty terms in the

separate agreement shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Soft-

ware and technical data rights granted to

the federal government include only those

rights customarily provided to end user cus-

tomers. Agilent provides this customary

commercial license in Software and techni-

cal data pursuant to FAR 12.211 (Technical

Data) and 12.212 (Computer Software) and,

for the Department of Defense, DFARS

252.227-7015 (Technical Data - Commercial

Items) and DFARS 227.7202-3 (Rights in

Commercial Computer Software or Com-

puter Software Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly

performed or adhered to, could

result in damage to the product or

loss of important data. Do not

proceed beyond a CAUTION notice

until the indicated conditions are

fully understood and met.

WARNING

A WARNING notice denotes a

hazard. It calls attention to an

operating procedure, practice, or

the like that, if not correctly

performed or adhered to, could

result in personal injury or death.

Do not proceed beyond a

WARNING notice until the

indicated conditions are fully

understood and met.

Software Revision

This guide is valid for A.01.00 revisions of

the N9320B RF Spectrum Analyzer

software.

N9320B Quick Start Guide

Contents

1 Getting Started 1

Check the Shipment and Order List 2

Options 3

Safety Notice 4

Power Requirements 5

Power On and Check 7

Running Internal Alignments 8

Check for Instrument Messages 8

Environmental Requirements 9

Electrostatic Discharge Protection 12

2 N9320B Overview 13

Agilent N9320B at a Glance 14

Front Panel at a Glance 15

Display Annotations 18

Rear Panel Overview 20

Front and rear panel symbols 21

3 Basic Operation 23

Making a Basic Measurement 24

Using the Front Panel 24

Presetting the Spectrum Analyzer 25

Viewing a Signal 26

Some helpful Tips 28

N9320B Quick Start Guide

Contents

Set system date and time 28

Enable the Options 28

Using an External Reference 28

Firmware Update 29

Remote Control 30

Installing Agilent IO libraries suite 30

USB Connection 31

LAN Connection 31

4Troubleshooting 33

Check the basics 34

Warranty and Service Options 35

Contact Agilent Technologies 36

Index 37

s

Agilent N9320B Spectrum Analyzer

Quick Start Guide

Getting Started

Check the Shipment and Order List 2

Safety Notice 4

Power Requirements 5

Power On and Check 7

Environmental Requirements 9

Electrostatic Discharge Protection 12

This Quick Start Guide helps you in preparing the spectrum

analyzer for use. With this guide, you will become familiar

with its basic operating and programming information. For

more information, please refer to User’s Guide from:

www.agilent.com/find/n9320b

This chapter gives you the information to start using the

spectrum analyzer correctly.

2N9320B Spectrum Analyzer

1 Getting Started

Check the Shipment and Order List

After receiving the shipment, first check the shipment and

your order list.

Inspect the shipping container and the cushioning material

for signs of stress. Retain the shipping materials for future

use, as you may wish to ship the analyzer to another

location or to Agilent Technologies for service. Verify that

the contents of the shipping container are complete.

Each spectrum analyzer includes the following accessories as

standard:

Shipping Problems?

If the shipping materials are damaged or the contents of the

container are incomplete:

•Contact the nearest Agilent Technologies office to arrange

for repair or replacement. You will not need to wait for a

claim settlement.

•Keep the shipping materials for the carrier’s inspection.

•If you must return an analyzer to Agilent Technologies,

use the original (or comparable) shipping materials.

For any questions about your shipment, Contact Agilent

Technologies for consulting and service.

Item Description

USB cable (A-B) Connection for remote control

N-BNC adapter and BNC cable Connection for alignment

Printed Quick Start Guide Documentation

Three-pin power cord Specific to shipping location

Help kit CD-ROM Remote control Software

Agilent IO libraries suite

PDF files for quick start guide & user’s guide

Getting Started 1

N9320B Spectrum Analyzer 3

Options

Verify if that the shipment includes your ordered options by

checking the option label on the shipping container:

Unless specified otherwise, all options are available when

you order a spectrum analyzer; some options are also

available as kits that you can order and install/activate after

you receive the analyzer. Order kits through your local

Agilent Sales and Service Office.

At the time of analyzer purchase, options can be ordered

using your product number and the number of the option

you are ordering. For example, if you are ordering Option

TG3, you would order N9320B- TG3.

If you are ordering an option after the purchase of your

analyzer, you will need to add a K to the product number

and then specify which option you are ordering. For

example, N9320BK- TG3.

For the latest information on Agilent N9320B Spectrum

Analyzer options and upgrade kits, visit the following

Internet URL:

http://www.agilent.com/find/sa_upgrades

Option Description Part number

PA3 3 GHz Preamplifier N9320B-PA3

AMA AM/FM demodulation N9320B-AMA

ABA English printed User’s Guide N9320B-ABA

TG3 3 GHz tracking generator N9320B-TG3

TR1 RF training kit N9320B-TR1

1HB Handle and bumpers N9320B-1HB

1CM Rackmount kit N9320B-1CM

1TC Hard transit case N9320B-1TC

UK6 Commercial calibration certificate

with testing data

N9320B-UK6

4N9320B Spectrum Analyzer

1 Getting Started

Safety Notice

Read the following warnings and cautions carefully before

powering on the spectrum analyzer to ensure personal and

instrument safety.

WARNING Always use a well-grounded, three-pin AC power cord to connect to

power source. Personal injury may occur if there is any interruption of

the AC power cord. Intentional interruption is prohibited. If this product

is to be energized via an external auto transformer for voltage

reduction, make sure that its common terminal is connected to a

neutral (earthed pole) of the power supply.

WARNING Personal injury may result if the spectrum analyzer covers are removed.

There are no operator-serviceable parts inside. To avoid electrical

shock, refer servicing to qualified personnel.

WARNING Electrical shock may result if the spectrum analyzer is connected to the

power supply while cleaning. Do not attempt to clean internally.

CAUTION Prevent damage to the instrument and ensure protection of the input

mixer by limiting average continuous power input to +33 dBm, DC voltage

to 50 VDC with >10 dB input attenuation. Instrument damage may result

if these precautions are not followed.

CAUTION To install the spectrum analyzer in other racks, note that they may

promote shock hazards, overheating, dusting contamination, and

inferior system performance. Consult your Agilent customer engineer

about installation, warranty, and support details.

Getting Started 1

N9320B Spectrum Analyzer 5

Power Requirements

The spectrum analyzer has an auto- ranging line voltage

input. The AC power supply must meet the following

requirements:

AC Power Cord

The analyzer is equipped with a three- wire power cord, in

accordance with international safety standards. This cable

grounds the analyzer cabinet when connected to an

appropriate power line outlet. The cable appropriate to the

original shipping location is included with the analyzer.

Various AC power cables are available that are unique to

specific geographic areas. You can order additional AC power

cables for use in different areas. The table AC Power Cords

lists the available AC power cables, the plug configurations,

and identifies the geographic area in which each cable is

appropriate.

The detachable power cord is the product disconnecting

device. It disconnects the mains circuits from the mains

supply before other parts of the product. The front panel

switch is only a standby switch and does not disconnect the

instrument from LINE power.

Voltage: 100 to 240 VAC (90 to 264 VAC)

Frequency: 50 to 60 Hz

Power: Maximum 100 W

6N9320B Spectrum Analyzer

1 Getting Started

AC Power Cords

a. Plug description describes the plug only. The part number is for the complete cable assembly.

Plug Type Cable Part

Number Plug a

Description

For use in

Country & Region

8121-1703 BS 1363/A Option 900

United Kingdom, Hong Kong,

Singapore, Malaysia

8120-0696 AS 3112:2000 Option 901

Australia, New Zealand

8120-1692 IEC 83 C4 Option 902

Continental Europe, Korea,

Indonesia, Italy, Russia

8120-1521 CNS 10917-2

/NEMA 5-15P

Option 903

United States, Canada, Taiwan,

Mexico

8120-2296 SEV 1011 Option 906

Switzerland

8120-4600 SABS 164-1 Option 917

South Africa, India

8120-4754 JIS C8303 Option 918

Japan

8120-5181 SI 32 Option 919

Israel

8120-8377 GB 1002 Option 922

China

250V 10A

250V 16A

230V 15A

250V 16A

125V 15A

250V 10A

125V 10A

250V 10A

Tabla de contenidos

Otros manuales de Instrumento de medición de Agilent Technologies

Agilent Technologies

Agilent Technologies 4263B Manual de usuario

Agilent Technologies

Agilent Technologies 8504B Manual de usuario

Agilent Technologies

Agilent Technologies N4376B Manual de usuario

Agilent Technologies

Agilent Technologies VARIAN Dual Manual de usuario

Agilent Technologies

Agilent Technologies 1664A Manual de usuario

Agilent Technologies

Agilent Technologies u8903a Manual de usuario

Agilent Technologies

Agilent Technologies E5382A Manual de usuario

Agilent Technologies

Agilent Technologies Seahorse XFe96 Manual de usuario

Agilent Technologies

Agilent Technologies N9010AK-REA Manual de usuario

Agilent Technologies

Agilent Technologies N2797A Manual de usuario

Agilent Technologies

Agilent Technologies 490 Micro GC Instrucciones de funcionamiento y mantenimiento

Agilent Technologies

Agilent Technologies 8712ET Manual de usuario

Agilent Technologies

Agilent Technologies U3025AE10 Manual de usuario

Agilent Technologies

Agilent Technologies HP 8566B Manual del propietario

Agilent Technologies

Agilent Technologies 55B AA Manual de usuario

Agilent Technologies

Agilent Technologies ESA-E Series Manual de usuario

Agilent Technologies

Agilent Technologies 89410A Manual de usuario

Agilent Technologies

Agilent Technologies N1911A Manual de usuario

Agilent Technologies

Agilent Technologies ENA Series Manual de usuario

Agilent Technologies

Agilent Technologies 1170 Series Manual de usuario

Agilent Technologies

Agilent Technologies 16441A R-Box Manual de usuario

Agilent Technologies

Agilent Technologies E8363A Manual de instalación y operación

Agilent Technologies

Agilent Technologies E4440AU Manual de instalación y operación

Agilent Technologies

Agilent Technologies Acqiris U10 Series Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario