Agilent Technologies XY Manual de usuario

Agilent XY Autosampler

Operator’s Manual

Agilent Technologies Deutschland GmbH

Hewlett-Packard-Strasse 8

76337 Waldbronn

Germany

Copyright Agilent

Technologies 2000

Reproduction, adaption,

or translation without

prior written permission

is prohibited, except as

allowed under the

Part No. G1811-90001

Edition 02/00

Printed in Germany

Warranty

The information

contained in this

document is subject to

change without notice.

Agilent Technologies

makes no warranty of

any kind with regard to

this material,

including, but not

limited to, the implied

warranties or

merchantability and

fitness for a particular

purpose.

Agilent Technologies

shall not be liable for

errors contained herein

or for incidental or

consequential damages

in connection with the

furnishing, performance,

or use of this material.

WARNING

For details of safety,

see Safety Information

on page 60.

Warning Symbols Used

In This Book

The apparatus is marked

with this symbol when

the user should refer to

the instruction manual

in order to protect the

apparatus against

damage.

Operator’s Manual

Agilent XY Autosampler

In This Book

This book contains the following chapters:

• Chapter 1 “Description and Specifications” — The XY autosampler’s

accessories described, and its specifications.

•Chapter 2 “Installation”—How to set up the XY autosampler.

•Chapter 3 “Operation”—How to operate the XY autosampler through the

Agilent ChemStation.

•Chapter 4 “Maintenance and Repair”—Guidelines for maintaining your

XY autosampler.

•Chapter 5 “Parts and Supplies”—Replacement parts for the

XY autosampler.

•Chapter 6 “The Rear Panel”—Interface connectors at the rear panel of the

XY autosampler.

Contents

1 Description and Specifications

The XY autosampler’s accessories described, and its

specifications 7

Description 9

Specifications 10

Site Requirements 11

2 Installation

How to set up the XY autosampler 13

Unpacking the XY Autosampler 15

Power Connection and Fuses 17

Assembling the XY Autosampler 19

Setting up the Communication Interface 30

3 Operation

How to operate the XY autosampler through the Agilent

ChemStation 35

Software and Firmware Requirements 37

Controlling the XY Autosampler through Agilent

ChemStation 38

4 Maintenance and Repair

Guidelines for maintaining your XY autosampler 43

Contents

Cleaning the XY Autosampler and Safety Shield 45

Replacing the Needle 46

Replacing a Fuse 48

Transporting the XY Autosampler 49

5 Parts and Supplies

Replacement parts for the XY autosampler 51

6TheRearPanel

Interface connectors at the rear panel of the

XY autosampler 53

Description of Connectors 54

1Description and

Specifications

The XY autosampler’s accessories described, and

its specifications

Description and

Specifications

This chapter contains:

•a brief description of the accessories for the XY autosampler, and

•technical specifications of the XY autosampler.

Description and Specifications

Description

The Agilent Technologies XY autosampler (G1811A) is an XYZ robot which

can automate sample handling procedures. It is controlled by Agilent

ChemStation for UV-visible spectroscopy software of revision A.06.0x or

higher. Figure 1 shows the standard configuration of the XY autosampler.

Figure 1 Assembled XY Autosampler

To transfer analyte from the XY autosampler to the spectrophotometer,

tubings, a flow cell and a peristaltic pump are needed. For more details of

how to connect tubings to the XY autosampler needle, see “Connecting the

Sipper Tubing to the XY Autosampler”on page 28.

Systems including an XY autosampler controlled by a local user interface

from Gilson, Inc. are not supported by Agilent.

Z-axis

Needle

Vertical arm status light

support bar

safety shield

tray

Y-axis

X-axis

horizontal arm

rack

Description and Specifications

Specifications

Manufacturing Standards

Safety certification:

•UL 3101

•CSA 1010

•EN 61010

EMC certification:

•EN 50082-1

•FCC part 15

EMI certification:

•EN 50081-1

Autosampler type XYZ robot with stationary rack design.

Front panel One yellow LED.

Needle rinse Dedicated rinse station for cleaning the inside

and outside of the needle.

Selectable rinse volume and flow rate

Needle positioning

performance Resolution in X, Y and Z: ± 1 mm.

Repeatability in X, Y and Z: ± 0.25 mm.

Arm speed X- and Y-axes: 250 mm/s.

Z-axis: 126.9 mm/s.

Rack capacity Up to four 21 series racks.

Control Computer control via RS-232 port.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de laboratorio de Agilent Technologies

Agilent Technologies

Agilent Technologies 7694 Manual de usuario

Agilent Technologies

Agilent Technologies TS-8989 PXI Manual de usuario

Agilent Technologies

Agilent Technologies BioCel 1200 Manual de usuario

Agilent Technologies

Agilent Technologies 490 Manual de usuario

Agilent Technologies

Agilent Technologies 7890 Series Instrucciones de funcionamiento

Agilent Technologies

Agilent Technologies 55B AA Manual de usuario

Agilent Technologies

Agilent Technologies Cary 3500 Manual de usuario

Agilent Technologies

Agilent Technologies 7697A Manual de instalación

Agilent Technologies

Agilent Technologies InfinityLab LC Series Manual de usuario

Agilent Technologies

Agilent Technologies PlateLoc Manual de usuario

Agilent Technologies

Agilent Technologies 1290 infinity Manual de usuario

Agilent Technologies

Agilent Technologies 1260 Infinity II Manual de usuario

Agilent Technologies

Agilent Technologies 1200 series Manual de usuario

Agilent Technologies

Agilent Technologies 1200 series Manual de usuario

Agilent Technologies

Agilent Technologies M9302A Guía del usuario

Agilent Technologies

Agilent Technologies 1290 Infinity II Manual de usuario

Agilent Technologies

Agilent Technologies 6850 Series Instrucciones de funcionamiento e instalación

Agilent Technologies

Agilent Technologies 7890B Manual de usuario

Agilent Technologies

Agilent Technologies Medalist i1000 Manual de usuario

Agilent Technologies

Agilent Technologies 1290 Infinity II Manual de usuario

Agilent Technologies

Agilent Technologies 8890 Manual de usuario

Agilent Technologies

Agilent Technologies 6890 Series Manual de usuario

Agilent Technologies

Agilent Technologies OmniBER 720 Manual de usuario

Agilent Technologies

Agilent Technologies Cary 630 FTIR Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario

Yamato

Yamato BM510 Manual de usuario