Network Setup
The H400+ can be connected to your network either via ethernet or Wi-Fi.
For ethernet connection, follow instructions 1, 2, 3.
For Wi-Fi connections, follow instructions 1, 2, 4, 5, 6.
Click the “Config” button. Click the button.
Plug the network cable into the back of
the machine. If the printer successfully
connects to the network, the ethernet
connection icon will appear on the top
right of the status bar as shown below.
To use a WiFi connection, toggle the
WiFi option to ON, and choose the Wi-Fi
network that your computer is connected to.
Input the Wi-Fi password, then press
Return.
If the printer is successfuly connected
to the Wi-Fi network, the Wi-Fi connection
icon will appear in the top right of the status
bar as shown below.
