AEMC instruments AmpFlex 193-24-BK Manual de usuario
Current Probes & Sensors
(For Power Quality Meters & Power Energy Loggers)
193-24-BK
193-36-BK
196A-24-BK
MA193-10-BK
MA193-14-BK
MN93-BK
MN193-BK
MR193-BK
SL261
SR193-BK
ENGLISH User Manual
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30
Thank you for purchasing an AEMC current probe.
For best results from your instrument and for your safety, read the enclosed
operating instructions carefully and comply with the precautions for use. These
products must be only used by qualied and trained users.
WARNING, risk of DANGER! The operator must refer to these instructions
whenever this danger symbol appears.
CAUTION! Risk of electric shock. The voltage at the parts marked with this
symbol may be dangerous.
Application or withdrawal authorized on conductors carrying dangerous voltages.
Type A current sensor as per IEC 61010-2-032.
Must not be applied to or removed from conductors at dangerous voltages.
Type B current sensor as per IEC 61010-2-032.
Equipment is protected by double insulation.
Battery
Important instructions to read and to fully understand.
Useful information or tip to read.
The CE marking guarantees conformity with European directives and with
regulations covering EMC.
The trash can with a line through it means that in the European Union, the
product must undergo selective disposal for the recycling of electric and
electronic material, in compliance with Directive WEEE 2002/96/EC.
Denition of Measurement Categories (CAT)
CAT IV Measurement category IV corresponds to measurements taken at the
source of low-voltage installations.
Example: power feeders, counters and protection devices.
CAT III Measurement category III corresponds to measurements on building
installations.
Example: distribution panel, circuit-breakers, machines or xed indus-
trial devices.
CAT II Measurement category II corresponds to measurements taken on cir-
cuits directly connected to low-voltage installations.
Example: power supply to domestic electrical appliances and portable
tools.
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30
PRECAUTIONS BEFORE USE
The protection assured by the current probe can be compromised if it is used in a
way that is not recommended by the manufacturer.
■Comply with the rated maximum voltage and current, and the measurement
category. Do not use the current probe on networks where the voltage or
category exceeds those specied.
■Comply with the conditions of use (e.g. temperature, humidity, altitude, degree
of pollution, location).
■Do not use the current probe if its housing is open, deteriorated, or incorrectly
reassembled. Before each use, check the integrity of the insulation of the unit,
jaws, clamps, housing, and leads.
■Do not subject the current probe to water or other liquids.
■Keep the jaw contacts of the clamp absolutely clean.
■Use suitable personal protective equipment when hazardous voltages may be
accessible in the installation where the measurement is made.
■Any repairs must be carried out by accredited skilled personnel.
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30
Current Probes & Sensors for Power Quality Meters and Power Energy Loggers
3
Table of Contents
1. INTRODUCTION .....................................................................4
1.1 Receiving Your Shipment......................................................................4
1.2 Ordering Information.............................................................................4
2. PRODUCT FEATURES ............................................................5
2.1 Control Features...................................................................................5
2.1.1 AmpFlex®Models 193-24-BK, 193-36-BK & 196-24-BK ..........5
2.1.2 MiniFlex®Model MA193-BK .....................................................6
2.1.3 AC/DC Current Probe Model J93-BK .......................................7
2.1.4 AC Current Probe Models MN93-BK & MN193-BK..................8
2.1.5 AC Current Probe Model MR193-BK........................................9
2.1.6 AC Current Probe Model SL261.............................................10
2.1.7 AC Current Probe Model SR193-BK ......................................11
3. OPERATION..........................................................................12
4. SPECIFICATIONS .................................................................14
4.1 Electrical .............................................................................................14
4.2 Environmental.....................................................................................15
4.3 Mechanical..........................................................................................15
4.4 Safety..................................................................................................16
5. MAINTENANCE ....................................................................17
5.1 Cleaning..............................................................................................17
5.2 Battery Replacement ..........................................................................17
5.2.1 Model MR193-BK ...................................................................17
5.2.2 Model SL261 ..........................................................................17
5.2.3 Model J93-BK.........................................................................18
5.3 Repair and Calibration........................................................................19
5.4 Technical and Sales Assistance..........................................................19
5.5 Limited Warranty.................................................................................20
5.6 Warranty Repairs................................................................................20
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30
4Current Probes & Sensors for Power Quality Meters and Power Energy Loggers
1. INTRODUCTION
1.1 Receiving Your Shipment
Upon receiving your shipment, make sure that the contents are consistent with the
packing list. Notify your distributor of any missing items. If the equipment appears
to be damaged, le a claim immediately with the carrier and notify your distributor
at once, giving a detailed description of any damage. Save the damaged packing
container to substantiate your claim.
1.2 Ordering Information
NOTE: The current probes in this manual are compatible only with AEMC®Power
Analyzers (see § 4 for meter compatibility).
AmpFlex®Sensor 24" Model 193-24-BK ..........................................Cat. #2140.34
AmpFlex®Sensor 36" Model 193-36-BK ..........................................Cat. #2140.35
AmpFlex®Sensor 24” Model 196A-24-BK........................................Cat. #2140.75
MiniFlex®Sensor 10" Model MA193-10-BK......................................Cat. #2140.48
MiniFlex®Sensor 14" Model MA193-14-BK......................................Cat. #2140.50
AC/DC Current Probe Model J93-BK ....................... Discontinued October 2021
AC Current Probe Model MN93-BK..................................................Cat. #2140.32
AC Current Probe Model MN193-BK................................................Cat. #2140.36
AC Current Probe Model MR193-BK................................................Cat. #2140.28
AC Current Probe Model SR193-BK ................................................Cat. #2140.33
AC/DC Current Probe Model SL261* ...............................................Cat. #1201.51
* Adapter for SL261 - BNC Adapter............................................Cat. #2140.40
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30
Current Probes & Sensors for Power Quality Meters and Power Energy Loggers
5
2. PRODUCT FEATURES
2.1 Control Features
2.1.1 AmpFlex
®
Models 193-24-BK, 193-36-BK & 196A-24-BK
2
3
4
1
1. Flexible sensor
2. Sensor opening connector
3. Shielded lead
4. Custom 4-pin input connector (available standard or IP 67 compliant,
depending on instrument)
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30
6Current Probes & Sensors for Power Quality Meters and Power Energy Loggers
2.1.2 MiniFlex®Model MA193-BK
2
3
4
1
1. Flexible sensor
2. Sensor opening device
3. Shielded lead
4. Custom 4-pin input connector
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30
Current Probes & Sensors for Power Quality Meters and Power Energy Loggers
7
2.1.3 AC/DC Current Probe Model J93-BK
1
2
4
5
6
3
5000A
500A
ZERO
Stop
Test
MARCHE
SORTIE
ZERO
ON
OFF
300 V CAT IV
600 V CAT III
1. Jaws
2. 4-point CA connector
3. Safety guard
4. Zero adjustment knob
5. Power ON/Low battery indicator
6. Three-position switch: ON, OFF, battery test
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30
8Current Probes & Sensors for Power Quality Meters and Power Energy Loggers
2.1.4 AC Current Probe Models MN93-BK & MN193-BK
200V CAT IV
600V CAT III 200A
5
4
2
3
6
1
1. Jaws
2. Protective guard
3. Two-position range switch (MN193-BK only)
4. Jaw opening lever
5. Shielded lead
6. Custom 4-pin input connector
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30
Current Probes & Sensors for Power Quality Meters and Power Energy Loggers
9
2.1.5 AC Current Probe Model MR193-BK
5
2
4
3
7
6
1
1. Jaws
2. Protective guard
3. Jaw opening lever
4. Two-position range switch
5. Shielded lead
6. Zero adjustment
7. Custom 4-pin input connector
www.calcert.com [email protected]1.800.544.2843 0
5
10
15
20
25
30
Otros manuales para AmpFlex 193-24-BK
3
Este manual sirve para los siguientes modelos
13
Tabla de contenidos
Otros manuales de Instrumento de medición de AEMC instruments
AEMC instruments
AEMC instruments DIGITAL FLEXPROBE 400D-6 Manual de usuario
AEMC instruments
AEMC instruments 6550 Manual de usuario
AEMC instruments
AEMC instruments MN213 Manual de usuario
AEMC instruments
AEMC instruments SR701 Manual de usuario
AEMC instruments
AEMC instruments SR759 Manual de usuario
AEMC instruments
AEMC instruments 1015 Manual de usuario
AEMC instruments
AEMC instruments 6527 Manual de usuario
AEMC instruments
AEMC instruments MR525 Manual de usuario
AEMC instruments
AEMC instruments SIMPLE LOGGER L100 Manual de usuario
AEMC instruments
AEMC instruments 5050 Manual de usuario
AEMC instruments
AEMC instruments FlexProbe 24-3001 Manual de usuario
AEMC instruments
AEMC instruments MN375 Manual de usuario
AEMC instruments
AEMC instruments A196-24-BK Manual de usuario
AEMC instruments
AEMC instruments CA811 Manual de usuario
AEMC instruments
AEMC instruments JM865A Manual de usuario
AEMC instruments
AEMC instruments 5070 Manual de usuario
AEMC instruments
AEMC instruments PowerPad IV 8345 Manual de usuario
AEMC instruments
AEMC instruments MN01 Manual de usuario
AEMC instruments
AEMC instruments 1035 Manual de usuario
AEMC instruments
AEMC instruments 407 Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario