AEMC instruments 1035 Manual de usuario

DIGITAL ANALOG

MEGOHMMETERS

1035

1039

ENGLISH User Manual

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

All manuals and user guides at all-guides.com

all-guides.com

Statement of Compliance

Chauvin Arnoux®, Inc. d.b.a. AEMC®Instruments

certiﬁes that this instrument has been calibrated

using standards and instruments traceable to

international standards.

We guarantee that at the time of shipping your

instrument has met its published speciﬁcations.

An NIST traceable certiﬁcate may be

requested at the time of purchase, or obtained

by returning the instrument to our repair and

calibration facility, for a nominal charge.

The recommended calibration interval for this

instrument is 12 months and begins on the date of

receipt by the customer. For recalibration, please

use our calibration services. Refer to our repair

and calibration section at www.aemc.com.

Serial #: ________________________________

Catalog #: 2116.90 /2116.91

Model #: 1035 /1039

Please ﬁll in the appropriate date as indicated:

Date Received: _________________________________

Date Calibration Due: _______________________

Chauvin Arnoux®, Inc.

d.b.a AEMC®Instruments

www.aemc.com

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

All manuals and user guides at all-guides.com

Table of Contents

1. INTRODUCTION............................................................................... 3

1.1 International Electrical Symbols................................................4

1.2 DenitionofMeasurementCategories .....................................4

1.3 ReceivingYourShipment..........................................................4

1.4 OrderingInformation.................................................................5

1.4.1 AccessoriesandReplacementParts............................5

2. PRODUCT FEATURES ...................................................................... 6

2.1 Description................................................................................6

2.2 Model1035ControlFeatures ...................................................7

2.3 Model1039ControlFeatures ...................................................8

2.4 LCDDisplaySymbols ...............................................................9

2.4.1 DigitalDisplaySymbols ................................................9

2.4.2 AnalogBargraph...........................................................9

2.5 ButtonFunctions.....................................................................10

2.5.1 YellowPushButton .....................................................10

2.5.2 ALARMButton ............................................................10

2.5.3 CursorButton..............................................................10

2.5.4 ScrollCursorButton.................................................... 11

2.5.5 BacklightButton ...................................................11

2.5.6 RELButton...............................................................11

2.6 MeasurementFunctions .........................................................12

2.6.1 AC/DCVoltageMeasurement-SafetyCheck ............12

2.6.2 InsulationResistanceTesting .....................................12

2.6.3 Resistance ..................................................................13

2.6.4 Capacitance(1039) ....................................................13

2.6.5 AC/DCCurrent(1039) ................................................14

2.6.6 ACVoltage(1039) ......................................................14

2.7 SpecialFunctions ...................................................................15

2.7.1 BatteryLifeIndication .................................................15

2.7.2 Auto-Off.......................................................................15

2.7.3 BatteryAutoTest.........................................................15

2.7.4 Fuse(1039) ................................................................16

2.7.5 Buzzer.........................................................................16

2.7.6 AlarmSetpoints ..........................................................17

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

All manuals and user guides at all-guides.com

2.7.7 RelativeMeasurements( REL).................................19

2.7.8

ProgrammingtheCapacitanceperUnitLength(1039)......19

3. SPECIFICATIONS........................................................................... 20

3.1 ElectricalSpecications ..........................................................20

3.1.1 Voltage........................................................................20

3.1.2 Insulation ....................................................................20

3.1.3 Resistance ..................................................................21

3.1.4 Capacitance(1039) ....................................................21

3.1.5 Distance(1039) ..........................................................22

3.1.6 AC/DCCurrent(1039) ................................................22

3.1.7 ACVoltage(1039) ......................................................22

3.1.8 PowerSupply..............................................................22

3.2 MechanicalSpecications ......................................................23

3.3 EnvironmentalConditions.......................................................23

3.4 SafetySpecications .........................................................24

4. OPERATION .................................................................................. 25

4.1 Operation ................................................................................25

4.2 AC/DCVoltageandInsulationMeasurement .........................25

4.3 ResistanceMeasurement .......................................................26

4.4 CapacitanceMeasurement(1039) .........................................26

4.5 AC/DCCurrentMeasurement(1039) .....................................26

4.6 ACVoltageMeasurement(1039) ...........................................27

4.7 ApplicationExamples .............................................................28

4.7.1 InsulationMeasurementsonInstallations...................28

4.7.2 InsulationMeasurementsonCables ..........................28

4.7.3 InsulationMeasurementsonMotors...........................29

5. MAINTENANCE ............................................................................. 30

5.1 BatteryReplacement ..............................................................30

5.2 FuseReplacement(1039) ......................................................30

5.3 Cleaning..................................................................................30

5.4 Storage ...................................................................................30

RepairandCalibration...........................................................................31

TechnicalandSalesAssistance ............................................................31

Limited Warranty ...................................................................................32

WarrantyRepairs...................................................................................32

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

All manuals and user guides at all-guides.com

DigitalAnalogMegohmmeterModels1035/1039

CHAPTER 1

INTRODUCTION

Warning

Thesesafetywarningsareprovidedtoensurethesafetyofper-

sonnelandproperoperationoftheinstrument.

• Readtheinstructionmanualcompletelyandfollowallsafety

informationbeforeoperatingthisinstrument.

• Safetyistheresponsibilityoftheoperator!

• Tests are to be carried out only on non-energized circuits!

Check for live circuits before making resistance measure-

ments(safetycheck).

• The Megohmmeter Models 1035 and 1039 are sources of

highvoltage,asisthesampleconnectedtothem.Allpersons

performing or assisting in the tests must employ all safety

precautionstopreventelectricalshocktothemselvesandto

others.

• AEMC®considerstheuseofrubberglovestobeanexcellent

safety practice even if the equipment is properly operated

andcorrectlygrounded.

• Whentestingcapacitancesamples,makesurethattheyhave

been properly discharged and that they are safe to touch.

Dielectricinsulationsamplesshouldbeshort-circuitedforat

leastvetimestheamountoftimetheywereenergized.

• Megohmmetersshouldneverbeusedinanexplosiveenvi-

ronment.

• Usetheleadssuppliedwiththemegohmmeters.Iftheyare

defectiveorworn,replacebeforetesting.

• NEVER use the megohmmeters on electrical conductors

ratedabove600VinovervoltagecategoryIII(CATIII).

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

All manuals and user guides at all-guides.com

DigitalAnalogMegohmmeterModels1035/1039

1.1 International Electrical Symbols

This symbol signiﬁes that the instrument is protected by double or rein-

forced insulation.

This symbol on the instrument indicates a WARNING and that the operator

must refer to the user manual for instructions before operating the

instrument. In this manual, the symbol preceding instructions indicates that

if the instructions are not followed, bodily injury, installation/sample and

product damage may result.

Risk of electric shock. The voltage at the parts marked with this symbol may

be dangerous.

In conformity with WEEE 2002/96/EC

1.2 Deﬁnition of Measurement Categories

CAT I: FormeasurementsoncircuitsnotdirectlyconnectedtotheAC

supply wall outlet such as protected secondaries, signal level,

andlimitedenergycircuits.

CAT II: For measurements performed on circuits directly connected to

the electrical distribution system. Examples are measurements

onhouseholdappliancesorportabletools.

CAT III: For measurements performed in the building installation at

the distribution level such as on hardwired equipment in xed

installationandcircuitbreakers.

CAT IV: For measurements performed at the primary electrical supply

(<1000V) such as on primary overcurrent protection devices,

ripplecontrolunits,ormeters.

1.3 Receiving Your Shipment

Uponreceivingyourshipment,makesurethatthecontentsareconsistent

with the packing list. Notify your distributor of any missing items. If the

equipmentappearstobedamaged,leaclaimimmediatelywiththecar-

rierandnotifyyourdistributoratonce,givingadetaileddescriptionofany

damage.Savethedamagedpackingcontainertosubstantiateyourclaim.

Donotuseaninstrumentthatappearstobedamaged.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

All manuals and user guides at all-guides.com

all-guides.com

DigitalAnalogMegohmmeterModels1035/1039

1.4 Ordering Information

Model 1035 ......................................................................... Cat. #2116.90

Includes soft carrying case, 3 color-coded leads, 1 black test probe, 3 alligator

clips, 2 grip probes, batteries and user manual.

Model 1039 ......................................................................... Cat. #2116.91

Includes soft carrying case, 2 color-coded leads, 1 black test probe, 2 alligator

clips, 2 grip probes, batteries and user manual.

Model 1035 Field Kit.......................................................... Cat. #2115.42

Includes meter, eld case, 3 color-coded leads, black test probe, 3 alligator clips,

2 grip probes, remote test probe, batteries and user manual.

Model 1039 Field Kit.......................................................... Cat. #2115.43

Includes meter, eld case, 2 color-coded leads, black test probe, 2 alligator clips,

2 grip probes, remote test probe, AC current probe, batteries and user manual.

1.4.1 Accessories and Replacement Parts

RemoteTestProbe.............................................................. Cat. #2118.97

SoftCarryingPouch ............................................................ Cat. #2119.02

Setof5Fuses,600V,0.63A,¼x1¼"(6x32mm)................ Cat. #2970.78

FieldCase(Waterproof) ...................................................... Cat. #2118.98

HandsFreeCarryingCase.................................................. Cat. #2118.99

ACCurrentProbeMN211(Lead-1mA/A-240Amax) ....... Cat. #2115.73

Model1035ReplacementLeadSet .................................... Cat. #2119.41

Includes3color-codedleads,blacktestprobe,3alligatorclips,2gripprobes.

Model1039ReplacementLeadSet .................................... Cat. #2119.40

Includes2leads,1blacktestprobe,2alligatorclipsand2gripprobes.

Order Accessories and Replacement Parts Directly Online

Check our Storefront at www.aemc.com/store for availability

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

All manuals and user guides at all-guides.com

DigitalAnalogMegohmmeterModels1035/1039

CHAPTER 2

PRODUCT FEATURES

2.1 Description

Theseportablemegohmmetersfunctionwithbatteries.Theycanbeused

tocheckinsulationandvoltages,andtomeasureresistances.The1039

canalsobeusedfor:

• measurementofthecapacitanceofatelephoneline

• currentmeasurement

• measurement of the pure alternating component of a DC

voltage

These megohmmeters help to ensure the safety of electrical and tele-

phoneinstallations.Theacquisition,processinganddisplayofthemea-

surementsaremanagedbyamicroprocessor.Theyofferawiderangeof

advantagessuchas:

• automaticdetectionofthepresenceofadangerousvoltage

ontheterminalsinMΩranges(allinsulationmeasurement

blockedifV>25V)

• protectionoftheinstrumentagainstexternalvoltagesurges

• operatorsafetybymeansofautomaticdischargeofthehigh

voltageontheequipmenttested

• displayofthedifferencecomparedtoameasurementvalue

in memory

• measurementofthelengthofatelephonelineaccordingto

itscapacitanceperkmunitlength(1039)

• automaticshutdownoftheinstrumenttosavethebatteries

andindicationofthebatterycharge

• fusetestingbyperiodicchecksduringcurrentmeasurement

(1039)

• alarge backlit LCDscreen with awide range ofindicators

makingitveryeasyfortheusertoread

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

All manuals and user guides at all-guides.com

DigitalAnalogMegohmmeterModels1035/1039

2.2 Model 1035 Control Features

Figure 1

1. Safetyterminals-Ø4mm(marked“+”and“G”)anda3-Pointsocket

forconnectingtheremotecontrol

2. Backlightliquidcrystaldisplay

3. Buttons:Yellow(toactivateinsulationmeasurement)

 ALARM, ,, and ΔREL(see§2.7)

4. 6-positionswitch:

 OFF,MΩ-50V,MΩ-100V,MΩ-250V,MΩ-500V,400kΩ

5. Batterycompartmentandstand(notshownindrawing)

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

All manuals and user guides at all-guides.com

DigitalAnalogMegohmmeterModels1035/1039

2.3 Model 1039 Control Features

Figure 2

1. Safetyterminals-Ø4mm(marked“mA”,“+”and“-”).Nexttothe“-”

terminal,therearetwoadditionalcontactsforconnectingtheremote

controlprobe(3-Pointconnector).

2. Backlightliquidcrystaldisplay

3. Buttons:Yellow(toactivateinsulationmeasurement)

 ALARM, ,, and ΔREL(see§2.7)

4. 7-positionswitch:

 OFF,MΩ-50V,MΩ-100V,40kΩ,4000nF,400mA,400V~

5. Batterycompartmentandstand(notshowninthedrawing)

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

All manuals and user guides at all-guides.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de AEMC instruments

AEMC instruments

AEMC instruments CA7027 Manual de usuario

AEMC instruments

AEMC instruments 403 Manual de usuario

AEMC instruments

AEMC instruments JM840A Manual de usuario

AEMC instruments

AEMC instruments SR701 Manual de usuario

AEMC instruments

AEMC instruments 6536 Manual de usuario

AEMC instruments

AEMC instruments MN379T Manual de usuario

AEMC instruments

AEMC instruments 6528 Manual de usuario

AEMC instruments

AEMC instruments SL261 Manual de usuario

AEMC instruments

AEMC instruments CM605 Manual de usuario

AEMC instruments

AEMC instruments AmpFlex Manual de usuario

AEMC instruments

AEMC instruments MN375 Manual de usuario

AEMC instruments

AEMC instruments MN312 Manual de usuario

AEMC instruments

AEMC instruments 6501 Manual de usuario

AEMC instruments

AEMC instruments 6536 Manual de usuario

AEMC instruments

AEMC instruments Clamp-On 3705 Manual de usuario

AEMC instruments

AEMC instruments MN261 Manual de usuario

AEMC instruments

AEMC instruments A196-24-BK Manual de usuario

AEMC instruments

AEMC instruments OX5042 Manual de usuario

AEMC instruments

AEMC instruments AmpFlex 193-24-BK Manual de usuario

AEMC instruments

AEMC instruments JM835A Manual de usuario

AEMC instruments

AEMC instruments 6505 Manual de usuario

AEMC instruments

AEMC instruments 6526 Manual de usuario

AEMC instruments

AEMC instruments FlexProbe 24-3001 Manual de usuario

AEMC instruments

AEMC instruments PEL 105 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario