Advantech MIC-3716 Manual de usuario

This documentation and the software included with this product are

copyrighted 2003by Advantech Co., Ltd. All rights are reserved.

Advantech Co., Ltd. reserves the right to make improvements in the

product described in this manual at any time without notice. No part of

this manual may be reproduced, copied, translated or transmitted in any

form or by any means without the prior written permission of

Advantech Co., Ltd. Information provided in this manual is intended to

be accurate and reliable. However, Advantech Co., Ltd. assumes no

responsibility for its use, or for any infringements of the rights of third

parties which may result from its use.

Acknowledgements

PC-LabCard™is a trademark of Advantech Co., Ltd.

IBM and PC are trademarks of International Business Machines

Corporation.

MS-DOS, Windows, Microsoft Visual C++ and Visual BASIC are

trademarks of Microsoft Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Delphi and C++ Builder are trademarks of Borland Software

Corporation.

PICMG, CompactPCI and the PICMG, and CompactPCI logos are

trademarks of the PCI Industrial Computers Manufacturers Group.

All other product names or trademarks are properties of their respective

owners.

CE notification

The MIC-3716,developed by ADVANTECH CO., LTD., has passed

the CE test for environmental specifications when shielded cables are

used for external wiring. We recommend the use of shielded cables.

This kind of cable is available from Advantech. Please contact your

local supplier for ordering information.

On-line Technical Support

For technical support and service, please visit our support website at:

http://www.advantech.com/support

Part No.: 2003371600 1st Edition

Printed in Taiwan January 2004

(This page is left blank for hard printing.)

iii

Contents

1. Introduction····································································································2

1.1 Product Description······································································· 3

1.2 What You Need to Get Started ······················································· 6

1.3 Software Programming Choices····················································· 8

1.4 Optional Accessories····································································· 9

2. Installation ····································································································12

2.1 Unpacking··················································································· 12

2.2 Software Installation ··································································· 14

2.3 Hardware Installation ·································································· 15

2.4 Device Setup & Configuration····················································· 20

2.5 Device Testing ············································································ 24

3. Signal Connections·······················································································32

3.1 Overview···················································································· 32

3.2 I/O Connector ············································································· 32

3.3 Analog Input Connections··························································· 36

3.4 Analog Output Connections························································· 41

3.5 Trigger Source Connections························································· 42

3.6 Field Wiring Considerations························································ 42

4. Software Programming Overview·····························································46

4.1 Programming Choices·································································46

4.2 DLL Driver Programming Roadmap············································ 47

5. Calibration····································································································52

5.1 Overview···················································································· 52

5.2 VR Assignment··········································································· 53

5.3 Auto-Calibration ········································································· 54

5.4 Manual Calibration······································································ 62

Appendix A. Specifications·············································································68

Appendix B. Block Diagrams·········································································71

Appendix C. Register Structure and Format···············································73

C.1 Overview···················································································· 73

C.2 I/O Port Address Map·································································73

C.3 Channel Number and A/D Data —BASE+0 and BASE+1 ·········· 78

C.4 Software A/D Trigger —BASE+0·············································· 79

C.5 A/D Channel Range Setting —BASE+2····································· 80

C.6 MUX Control —BASE+4 and BASE+5····································· 82

C.7 Control Register —BASE+6 and BASE+7·································86

C.8 Status Register —BASE+6 and BASE+7··································· 89

C.9 Clear Interrupt and FIFO —BASE+8 and BASE+9···················· 90

C.10 D/A Output Channel 0 —BASE+10 and BASE+11 ·················· 90

C.11 D/A Output Channel 0 —BASE+10 and BASE+11 ·················· 91

C.12 D/A Output Channel 1 —BASE+12 and BASE+13·················· 92

C.13 D/A Output Channel 1 —BASE+12 and BASE+13·················· 93

C.14 D/A Reference Control —BASE+14········································· 94

C.15 Digital I/O Registers —BASE+16 and BASE+17····················· 95

C.16 Calibration Registers —BASE+18 and BASE+19 ···················· 96

C.17 Board ID Registers —BASE+20·············································· 98

C.18 Programmable Timer/Counter Registers BASE+24, BASE+26,

BASE+28 and BASE+30························································ 98

Appendix D. 82C54 Counter Chip Function ···············································99

D.1 The Intel 82C54 ······································································· 99

D.2 Counter Read/Write and Control Registers·································101

D.3 Counter Operating Modes··························································105

D.4 Counter Operations····································································108

Appendix E. Manual Calibration································································110

E.1 A/D Calibration ·········································································111

E.2 D/A Calibration ·········································································114

(This page is left blank for hard printing.)

vii

Tables

Table 3-1: I/O Connector Signal Description···················································35

Table C-1: MIC-3716 register format (Part 1)·················································74

Table C-1: MIC-3716 register format (Part 2)·················································75

Table C-1: MIC-3716 register format (Part 3)·················································76

Table C-1: MIC-3716 register format (Part 4)·················································77

Table C-2: MIC-3716 Register for A/D data····················································78

Table C-3: Register for A/D channel range setting··········································80

Table C-4: Gain codes for MIC-3716·······························································81

Table C-5: Register for multiplexer control ·····················································82

Table C-6: Control Register···············································································86

Table C-7: MIC-3716 Register for channel number and A/D data··············87

Table C-8: Status Register ·················································································89

Table C-9: Register to clear interrupt and FIFO··············································90

Table C-10: Register for load D/A channel 0 data···········································90

Table C-11: Register for D/A channel 0 data···················································91

Table C-12: Register for load D/A channel 1 data···········································92

Table C-13: Register for D/A channel 1 data···················································93

Table C-14: Register for D/A reference control···············································94

Table C-15: Register for digital input·······························································95

Table C-16: Register for digital output·····························································95

Table C-17: Calibration Command and Data Register····································96

Table C-18: Calibration Command and Data Register····································97

Table C-19: Register for Board ID ···································································98

Table E-1:A/D binary code table····································································113

viii

Table E-2:D/A binary code table····································································117

Figures

Fig. 1-1:Installation Flow Chart·········································································7

Fig. 2-1:The Setup Screen of Advantech Automation Software····················14

Fig. 2-2:Different options for Driver Setup·····················································15

Fig. 2-3:The device name listed on the Device Manager·······························19

Fig. 2-4: The Device Manager dialog box························································21

Fig. 2-5: The Device Setting dialog box···························································22

Fig. 2-6: The Device Name appearing on the list of devices box················23

Fig. 2-7: The Advantech Device Test dialog box·············································24

Fig. 2-8: Analog Input tab on the Device Test dialog box·······························25

Fig. 2-9: Analog Output tab on the Device Test dialog box····························26

Fig. 2-10: Digital Input tab on the Device Test dialog box·····························27

Fig. 2-11: Digital Output tab on the Device Test dialog box···························28

Fig. 2-12: Counter tab on the Device Test dialog box·····································29

Fig. 3-1:I/O connector pin assignments for the MIC-3716····························34

Fig. 3-2:Single-ended input channel connection·············································37

Fig.3-3:Differential input channel connection -ground reference signal

source ································································································38

Fig.3-4:Differential input channel connection -floating signal source········39

Fig.3-5:Analog output connections·································································41

Fig. 5-1: MIC-3716 VR assignment ·································································54

Fig.5-2: Selecting the device you want to calibrate········································55

Fig. 5-3: Warning message before start calibration ·········································56

Fig.5-4: Auto A/D Calibration Dialog Box ·····················································57

Fig. 5-5: A/D Calibration Procedure 1······························································57

Fig. 5-6: A/D Calibration Procedure 2······························································58

Fig. 5-7: A/D Calibration Procedure 3······························································58

Fig. 5-8: A/D Calibration is finished·································································59

Fig. 5-9: Range Selection in D/A Calibration ··················································60

Fig. 5-10: Calibrating D/A Channel 0·······························································60

Fig. 5-11: Calibrating D/A Channel 1·······························································61

Fig.5-12: D/A Calibration is finished ······························································61

Fig.5-13: Selecting Input Rage in Manual A/D Calibration panel·················63

Fig.5-14: Adjusting registers············································································63

Fig.5-15 & Fig.5-16: Selecting D/A Range and Choosing Output

Voltage·······························································································65

Fig.5-17: Adjusting registers············································································66

Tabla de contenidos

Otros manuales de Tarjeta PCI de Advantech

Advantech

Advantech PCI-1761 Manual de usuario

Advantech

Advantech PCI-1714 Manual de usuario

Advantech

Advantech PCIE-1758 Series Manual de usuario

Advantech

Advantech PCA-684 Manual de usuario

Advantech

Advantech PCI-1601 Manual de usuario

Advantech

Advantech PCI-1710 Manual de usuario

Advantech

Advantech PCIE-1762H Manual de usuario

Advantech

Advantech PCI-1723 Manual de instalación y operación

Advantech

Advantech PCIE-1805 Manual de usuario

Advantech

Advantech DVP-7020A Manual de usuario

Advantech

Advantech PCI-1755 Manual de usuario

Advantech

Advantech PCIE-1752 Manual de usuario

Advantech

Advantech PCIE-1174 Manual de usuario

Advantech

Advantech PCIE-1803 Manual de instalación y operación

Advantech

Advantech PCI-1736UP Manual de usuario

Advantech

Advantech MIO-5393 Manual de usuario

Advantech

Advantech PCM-2604C-AE Manual de instalación y operación

Advantech

Advantech DVP-7635HE Manual de usuario

Advantech

Advantech PCI-COMM Series Manual de usuario

Advantech

Advantech PCM-3641I Manual de instalación y operación

Advantech

Advantech MIC-3401 Manual de usuario

Advantech

Advantech UNO-P166 Manual de instalación y operación

Advantech

Advantech PCN-6351 Series Manual de usuario

Advantech

Advantech DVP-7014HE Manual de usuario

Manuales populares de Tarjeta PCI de otras marcas

ERMA

ERMA SSI 1417 Manual de usuario

SIIG

SIIG CyberSerial Dual PCI Instrucciones de montaje

Moxa Technologies

Moxa Technologies CP-102E Manual de usuario

I-Bus

I-Bus IBC2602 Manual de usuario

Exsys

Exsys EX-60102 Manual de usuario

Chelsio Communications

Chelsio Communications T5 Series Manual de usuario

Conrad Electronic

Conrad Electronic 97 46 71 Manual de usuario

Micro Innovations

Micro Innovations USB650A Manual de usuario

KTI Networks

KTI Networks KF-310 Manual de usuario

Asus

Asus SpaceLink WL230 Manual de usuario

SIIG

SIIG SC2475 Manual de usuario

TRENDnet

TRENDnet TEW-703PI Manual de usuario

Belkin

Belkin F5D7000F Manual de usuario

Pericom

Pericom PI7C7100 Manual de usuario

ADLINK Technology

ADLINK Technology cPCI-3548 Manual de usuario

Digium

Digium TE200 Series Manual de usuario

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manual de usuario

Western Digital

Western Digital FireWire PCI Adapter Manual de usuario