Advantech PCN-6351 Series Manual de usuario

PCN-6351 Series

(PCN-6351 and PCN-6351L)

Half-size all-in-one Pentium®CPU

card with VGA/LCD and Fast

Ethernetinterface

User's Manual

This document is copyrighted, 2000. All rights are reserved. The

original manufacturer reserves the right to make improvements to the

products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in this

manual is intended to be accurate and reliable. However, the original

manufacturer assumes no responsibility for its use, nor for any

infringements upon the rights of third parties which may result from

its use.

Acknowledgements

Award is a trademark of Award Software International, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business

Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows®is a registered trademark of Microsoft Corp.

UMC is a trademark of United Microelectronics Corporation.

All other product names or trademarks are properties of their

respective owners.

For more information on this and other Advantech products please

visit our web sites at: http://www.advantech.com

http://www.advantech.com/epc

For technical support and service for please visit our support web site

at: http://www.advantech.com/support

This manual is for the PCN-6351/6351L Series Rev. A1

Part No. 2006635110

1st Edition Printed in Taiwan January 2000

Packing List

Before installing your board, make sure that the following materials

have been received:

• 1 PCN-6351 Series all-in-one single board computer

• 1 startup manual

• 1 hard disk drive (IDE) interface cable (40-pin) p/n: 1701440500

• 1 floppy disk drive interface cable (34-pin) p/n: 1701340600

• 1 parallel port adapter (26-pin) and COM2 adapter (9-pin) kit

p/n: 1700260250 and p/n: 1701140201 respectively

• 1 6-pin mini-DIN keyboard and PS/2 mouse adapter

p/n: 1700060201

• 1 ATX/AT power cable and converter

p/n: 1700000450 and p/n: 1700040052 respectively

• 1 CD-ROM (or disks) for utility, drivers and manual (in PDF

format)

• 1 warranty certificate

If any of these items are missing or damaged, contact your distributor

or sales representative immediately.

Optional Devices

• IrDA adapter p/n: 968900042

• 1 USB cable p/n: 1700100170

Hardware

Configuration

This chapter gives background

information on the PCN-6351/6351L. It

shows you how to configure the board to

match your application and prepare it for

installation into your PC.

Sections include:

•Introduction

•Specifications

•Board layout and dimensions

•Safety precautions

•Jumper settings

•Clock speed setup

•CPU setup

•Other setup

•Installing system memory (DIMMs)

CHAPTER

2PCN-6351/6351L User's Manual

1.1 Introduction

The PCN-6351/6351L is a half-size ISA-bus CPU card. It features

powerful on-board functions such as VGA, LCD, LAN and SSD,

making it is versatile enough to meet the needs of a host of different

applications.

Embedded Pentium®MMX CPU

The PCN-6351/6351L is equipped with Intel's new embedded

Pentium®MMX CPU (75 to 233 MHz). The CPU provides high

performance with low power consumption and better thermal manage-

ment. This makes the PCN-6351/6351L ideal for POS terminals,

ATMs, and industrial and embedded applications.

Note 1: Wake-on-LAN must be set at "Active Low" in order

to work properly.

Note 2: The PCA-6104NP2 and PCA-6106NP3 backplanes'

PCI Slot 1 is set as "Passive PCI". If "Active PCI" is

required in your application, please use other PCI

slots.

Note 3: In order for the Power Up by Alarm function to work,

you must wait until the FDD's POST procedure has

been completed, and only then turn off the system.

Note 4: After a system shutdown, it is advisable to wait 10

seconds before turning on the system power again.

This helps to protect the CPU board.

Chapter 1 Hardware Configuration 3

1.2 Specifications

Standard SBC functions

•CPU: Intel®Pentium®MMX CPU 75/233 MHz; AMD K5, K6, up

to K6-300 MHz; NS M1 PR 166/20 GP, M2-300; IDT Winchip C6

up to 240 MHz

•BIOS: AWARD 2 Mbit Flash BIOS, supports Plug & Play, APM

1.2, Ethernet boot ROM, boot from CD-ROM, LS-120, and ZIP

drive

•Chipset: SiS 5582 (PCN-6351), SiS 5598 (PCN-6351L)

•L2 cache: 512 KB PB SRAM

•System memory: One 128-pin DIMM RAM socket supports an

SDRAM memory module from 8 to 256 MB

•PCI IDE interface: One Enhanced IDE interface. Supports 2 IDE

devices, PIO modes 3 and 4 with bus mastering up to 14 MB/sec,

Ultra DMA mode up to 33 MB/sec

•Floppy disk drive interface: Supports up to two floppy disk drives:

3½" (720 KB or 1.44 MB) and/or 5¼" (360 KB or 1.2 MB)

•Parallel port: One parallel port , supports SPP/EPP/ECP

•IR port: Supports up to 4 Mbps transmission rate

•USB ports: Supports two USB ports, USB 1.0 compliant

•Serial ports: One RS-232, one RS-232/422/485

•Watchdog timer: Can generate a system reset or IRQ 11. Software

enabled/disabled. Time interval is from 1 ~ 62 seconds. Jumperless

with run-time setup

4PCN-6351/6351L User's Manual

VGA function

PCN-6351

•Controller: C&T 69000 / C&T 69030, supports 36-bit LCD and

CRT displays

•Display memory: 2 MB SDRAM built-in (optional 4 MB with

C&T 69030)

•Display resolution: Up to 1280 x 1024 @ 8bpp (1280 x 1024 @

24 bpp @ 4MB

PCN-6351L

•Controller: SiS 5598 built-in VGA supports CRT displays

•Display memory: Share system up to 4 MB

•Display resolution: Up to 1280 x 1024 @ 8 bpp (1280 x 1024 @

24 bpp @ 4MB

Ethernet controller functions (PCN-6351 only)

•Controller: RTL 8139, 10/100 Mbps

•I/O address switchless setting

•Connector type: RJ-45

•Boot ROM: Built-in system (optional)

Solid state disk

•Supports CompactFlash™disks

Mechanical and environmental specifications

•Max. power requirement: 5 A @ +5 V and 100 mA @ +12 V

•Operating temperature: 0 ~ 60°C (32 ~ 140°F)

•Size: 204 x 122 mm (8.03" x 4.8")

Chapter 1 Hardware Configuration 5

1.3 Board Layout and Dimensions

Unit: mm

Figure 1-1: PCN-6351/6351L board dimensions

6PCN-6351/6351L User's Manual

1.4 Safety Precautions

Follow these simple precautions to protect yourself from harm and

your PC from damage.

1. To avoid electric shock, always disconnect the power from your

PC chassis before you work on it. Do not touch any components

on the CPU card or other cards while the PC is on.

2. Disconnect power before making any configuration changes. The

sudden rush of power as you connect a jumper or install a card

may damage sensitive electronic components.

3. Always ground yourself to remove any static charge before you

touch your CPU card. Be particularly careful not to touch the chip

connectors. Modern integrated electronic devices, especially CPUs

and memory chips, are extremely sensitive to static electric

discharges and fields. Keep the card in its antistatic packaging

when it is not installed in the PC, and place it on a static dissipa-

tive mat when you are working with it. Wear a grounding wrist

strap for continuous protection.

Chapter 1 Hardware Configuration 7

OpenOpen

Open ClosedClosed

ClosedClosed

Closed Closed 2-3Closed 2-3

Closed 2-3Closed 2-3

Closed 2-3

1.5 Jumper Settings

This section tells how to set the jumpers to configure your card. It

gives the card default configuration and your options for each jumper.

After you set the jumpers and install the card, you will also need to

run the BIOS Setup program (discussed in Chapter 3) to configure the

serial port addresses, floppy/hard disk drive types and system operat-

ing parameters. Connections, such as hard disk cables, are explained

in Chapter 2.

For the location of each jumper, see the board layout diagram shown

earlier in this chapter.

You configure your card to match the needs of your application by

setting jumpers. A jumper is the simplest kind of electric switch. It

consists of two metal pins and a small metal cap (often protected by a

plastic cover) that slides over the pins to connect them. To "close" a

jumper, connect the pins with the cap. To "open" a jumper, remove

the cap. Sometimes a jumper will have three pins, labeled 1, 2 and 3.

In this case, connect either pins 1 and 2 or 2 and 3.

You may find a pair of needle-nose pliers useful for setting the

jumpers.

If you have any doubts about the best hardware configuration for your

application, contact your local distributor or sales representative

before you make any changes.

Otros manuales para PCN-6351 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Tarjeta PCI de Advantech

Advantech

Advantech VEGA-340 Manual de instalación y operación

Advantech

Advantech MIC-3723 Manual de usuario

Advantech

Advantech PCI-1752U Manual de usuario

Advantech

Advantech PCI-1723 Manual de usuario

Advantech

Advantech PCI-1718 Series Manual de usuario

Advantech

Advantech PCI-1751U Manual de usuario

Advantech

Advantech MIO-5393 Manual de usuario

Advantech

Advantech PCI-1737U Manual de usuario

Advantech

Advantech MIC-5602 Manual de usuario

Advantech

Advantech MIC-3758DIO Manual de usuario

Advantech

Advantech PCI-1724U Manual de usuario

Advantech

Advantech PCI-1601 Manual de usuario

Advantech

Advantech MIC-3620 Manual de usuario

Advantech

Advantech PCIE-1758 Series Manual de usuario

Advantech

Advantech PCA-6008VG Manual de usuario

Advantech

Advantech PCA-5612 Manual de instalación y operación

Advantech

Advantech PCIE-1805 Manual de usuario

Advantech

Advantech PCI-1758 Series Manual de usuario

Advantech

Advantech PCA-5630 Manual de instalación y operación

Advantech

Advantech DVP-7635HE Manual de usuario

Advantech

Advantech PCI-1752USO Manual de instalación y operación

Advantech

Advantech PCIE-1730H-AE Manual de usuario

Advantech

Advantech PCA-6005-B Manual de usuario

Advantech

Advantech PCI-1612B Manual del propietario

Manuales populares de Tarjeta PCI de otras marcas

ERMA

ERMA SSI 1417 Manual de usuario

SIIG

SIIG CyberSerial Dual PCI Instrucciones de montaje

Moxa Technologies

Moxa Technologies CP-102E Manual de usuario

I-Bus

I-Bus IBC2602 Manual de usuario

Exsys

Exsys EX-60102 Manual de usuario

Chelsio Communications

Chelsio Communications T5 Series Manual de usuario

Conrad Electronic

Conrad Electronic 97 46 71 Manual de usuario

Micro Innovations

Micro Innovations USB650A Manual de usuario

KTI Networks

KTI Networks KF-310 Manual de usuario

Asus

Asus SpaceLink WL230 Manual de usuario

SIIG

SIIG SC2475 Manual de usuario

TRENDnet

TRENDnet TEW-703PI Manual de usuario

Belkin

Belkin F5D7000F Manual de usuario

Pericom

Pericom PI7C7100 Manual de usuario

ADLINK Technology

ADLINK Technology cPCI-3548 Manual de usuario

Digium

Digium TE200 Series Manual de usuario

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manual de usuario

Western Digital

Western Digital FireWire PCI Adapter Manual de usuario