Advantech AIMB-210 Manual de instalación y operación

AIMB-210 Startup Manual 1

Before you begin installing your card, please make sure that

the following items have been shipped:

AIMB-210 Intel® Atom™ processor N270 Mini-ITX

Motherboard

IDE HDD cable (40 pin) x 1

SATA HDD cable x 2

SATA Power cable x 2

Serial port cable x 3

I/O port bracket x 1

Startup manual x 1

Driver CD x 1

Warranty card x1

Optional Cable

Parallel cable with bracket (P/N: 1700008809)

Dual port USB cable (P/N: 1700002204)

(27 cm) with bracket

If any of these items are missing or damaged, please con-

tact your distributor or sales representative immediately.

Note: Acrobat Reader is required to view any PDF ﬁle.

Acrobat Reader can be downloaded at:

www.adobe.com/Prodindex/acrobat/readstep.html

(Acrobat is a trademark of Adobe).

AIMB-210 (Intel® Atom™ processor N270 1.6 GHz

FSB 533 MHz Mini ITX Motherboard with VGA, LVDS,

TV-Out, 6 COM, Dual GbE, 8 USB, 2 SATA II)

Startup Manual

Standard SBC functions

CPU: Intel® Atom™ processor N270 1.6 GHz FSB 533

MHz

BIOS: Award 16 Mbit SPI

Chipset: Intel 945GSE with ICH7M

System Memory: Up to 2 GB; 200-pin SODIMM x 1,

Singel-channel 400/533 MHz DDR2

SATA2 Interface: Two onboard Serial ATA connectors

and data transfers up to 150 MB/s

IDE Interface: One onboard IDE connector supporting

up to two enhanced IDE devices. Supports PIO mode

4 (16.67 MB/s data transfer rate) and ATA 33/66/100

(33/66/100 MB/s data transfer rate) BIOS enabled/dis-

abled

CF interface: Supports compact ﬂash Type II

Serial ports: Six serial ports, COM1, COM3, COM4,

COM5 and COM6 are RS-232; COM2 is RS-232/422/485

Parallel port: One parallel port, supports SPP/EPP/ECP

mode (with pin header)

Keyboard/mouse connector: Supports one standard

PS/2 keyboard, one standard PS/2 mouse

Watchdog timer: 1~255 level timer intervals

USB 2.0: Supports up to eight USB 2.0 ports, four exter-

nal ports and four onboard pin headers

GPIO: 16-bit general purpose Input/Output

Graphic Interface

Controller: Chipset integrated VGA controller

Display memory: Dynamically shared system memory

up to 224 MB

CRT: Up to 2048x1536 at 75 Hz maximum resolution,

400MHz RAMDAC

LVDS interface: Supports up to UXGA (1600X1200)

LVDS port: Supports dual LVDS connectors.

- LVDS1: single channel 18-bit/dual channel 36-bit

- LVDS2 (Option) : single channel 24-bit/dual channel

48-bit

Ethernet Interface

Dual 10/100/1000Base-T GbE LAN Realtek RTL8111C

Mechanical and Environmental

Dimensions (L x W): 170 x 170 mm

Power supply voltage: 3.3 V, +5 V, 12 V, +5 Vsb, -12 V

Power requirements: +5 V @ 1.96 A, +3.3 V @ 1.21 A,

+12 V @ 0.19 A, 5 VSB @ 0.28, -12 V@ 0.06 A. Mea-

sure of the maximum current values with system under

maximum load

•

Specications

Packing List

For more information on this and other Advantech

products, please visit our website at:

http://www.advantech.com

http://www.advantech.com/eplatform

For technical support and service, please visit our

support website at:

http://www.advantech.com/support

This manual is for the AIMB-210 series Rev.A1.

Part No. 2006021010

Print in Taiwan

1st Edition,

Feb. 2009

2 AIMB-210 Startup Manual

Operating temperature: 0 ~ 60° C

Weight: 0.365 kg (weight of board)

The board has a number of connectors and jumpers that

help to conﬁgure the system to suit your application require-

ments. The tables below list the function of each of the

connectors and jumpers.

Label Function

JFP1 Power Switch / Reset connector

JFP2 External speaker / Sata HDD LED

connector / SM Bus connector

JFP3 (Keyboard

Lock and Power

LED)

Power LED

Suspend: Fast ﬂash (ATX/ AT)

System On: ON (ATX/ AT)

System Off: OFF (AT)

System Off: Slow ﬂash (ATX)

CMOS1 CMOS clear ( Default 1-2 )

JSETCOM2 COM2 RS232/422/485 Jumper

Setting

JLV1 LVDS1 LCD power 3.3 V/5 V selection

Default (1-2 , 3.3 V)

JLV2 LVDS2 LCD power 3.3 V/5 V selection

Default (1-2 , 3.3 V)

JPSON1 AT(1-2) / ATX(2-3) ( Default 2-3 )

LPT1 Parallel connector

USB56 USB port 5, 6 (on board)

USB78 USB port 7, 8 (on board)

VGA1 VGA connector

TVOUT1 TV-Out connector

COM12 Serial port: COM1 (RS232) and

COM2 (RS232, RS422 and RS485)

COM3 Serial port: COM3 (RS232)

COM4 Serial port connector

COM5 Serial port connector

COM6 Serial port connector

KBMS1

PS/2 Keyboard and Mouse connector

CPUFAN1 CPU FAN connector(3-pin)

SYSFAN1 System FAN connector(3-pin)

LAN1_USB12 LAN1 / USB port 1, 2

LAN2_USB34 LAN2 / USB port 3, 4

•

•CF1 CF Socket

AUDIO1 Audio connector

FPAUD1 Audio Front Panel Pin Header

DIO1

GPIO Header

IDE1

IDE connector

EATXPWR1

ATX 20Pin Main power connector

INV1

LVDS1 Inverter Power

INV2

LVDS2 Inverter Power

LVDS1

LVDS1 connector (Internal)

LVDS2

LVDS2 connector (External)

PCI1

PCI Slot

SATA1

Serial ATA1

SATA2

Serial ATA2

DIMMA1

Memory connector channel

BAT1

Battery Connector

SPI_CN1

SPI ﬂash update connector

JWDT1

Watchdog Reset

SPI_CN1

SPI BIOS socket

CMOS1: Clear CMOS

Pins Result

1-2*

Keep CMOS data*

2-3 Clear CMOS data

* Default

Keep CMOS data Clear CMOS

Jumpers and Connectors

Specications

Jumpers and Connectors

AIMB-210 Startup Manual 3

LVDS Connector: LVDS1/LVDS2 (Option)

JFP1

pin.1

#PWR_SW

pin.2 GND

pin.3

#RST_SW

pin.4 GND

*Power button pin is located in Pin 1 & 2 of front panel

connector.

The device complies with the requirements in Part 15 of

the FCC rules. Operation is subject to the following two

conditons:

This device may not cause harmful interference;

This device must accept any interference received,

including interference that may cause undesired opera-

tion.

JSETCOM2: COM2 RS232/422/485 Mode Selector

Users can use JSETCOM2 to select among RS

232/422/485 modes for COM2. The default setting is

RS 232.

JLV1/JLV2: LCD Power 3.3 V/5.5 V Selector

Closed Pins Result

1-2*

3.3 V*

2-3 5 V

* Default

3.3 V 5 V

1-2 locsed 2-3 closed

JPSON1: ATX, AT Mode Selector

Closed Pins Result

1-2

AT Mode

2-3* ATX Mode*

* Default

AT Mode ATX Mode

1-2 locsed 2-3 closed

JWDT1: Watchdog Timer Output Option

Closed Pins Result

1-2

2-3* System reset*

* Default

Jumpers and Connectors

Installation Note

JFP1

JFP2

JFP3

NC 1-2 Closed System Reset 2-3 Closed

RS-232 Configuration

(default)

RS-422 Configuration

RS-485 Configuration

LVDS1 LVDS2

Declaration of Conformity

4 AIMB-210 Startup Manual

FPAUD1

KBMS1COM12

COM4

LPT1

JSETCOM2

COM5

COM6

TVOUT1

LAN2

USB34

LAN1

USB12

VGA1

COM3

Audio1

DIMM A1

CPUFAN1

JWDT1

SYSFAN1

SATA1 SATA2

JPSON1

CMOS1

PCI1

EATXPWR1

IDE1

INV2

USB78

USB56

JLV1

LVDS2

JLV2

LVDS1

INV1

DIO1

SPI_CN1

JFP1

JFP2

JFP3

HDD LED

PWR_LED & KEY LOCK

PWR-SW RESET

SPEAKER

1 2 3 4

246 8

1 3 5 7

1 2 3 4 5

Board Diagram

Software Installation

The CD disc contains a driver installer program that will

lead you through the installation os various device drivers

needed to take full advantage of your motherboard.

The computer is supplied with a battery-powered Real-time

Clock circuit. There is a danger of explosion if the battery is

incorrectly replaced. Replace only wih same or equivalent

type recommended by the manufaturer. Discard used bat-

teries according to manufaturer’s instructions.

CAUTION

Otros manuales para AIMB-210

Tabla de contenidos

Otros manuales de Placa madre de Advantech

Advantech

Advantech MIC-3385 Manual de usuario

Advantech

Advantech PCM-4386 Manual de usuario

Advantech

Advantech AIMB-240 Series Manual de instalación y operación

Advantech

Advantech PCA-6166 Manual de usuario

Advantech

Advantech AIMB-252 Manual de usuario

Advantech

Advantech ACP-2010 Manual de usuario

Advantech

Advantech MIOe-DB2000 Manual de usuario

Advantech

Advantech MIO-2360 SBC Manual de usuario

Advantech

Advantech MIC-3359 Manual de usuario

Advantech

Advantech PCA-6752 Manual de instalación y operación

Advantech

Advantech AIMB-788 Manual de instalación y operación

Advantech

Advantech SIMB-M22 Manual de usuario

Advantech

Advantech AIMB-562 KIOSK Manual de usuario

Advantech

Advantech MIC-3396 Manual de usuario

Advantech

Advantech AIMB-586 Manual de usuario

Advantech

Advantech PPC-MB-8260AE Manual de instalación y operación

Advantech

Advantech AIMB-262 Manual de usuario

Advantech

Advantech ASMB-310IR Manual de instalación y operación

Advantech

Advantech AIMB-214 Manual de usuario

Advantech

Advantech MIOe-DB5000 Manual de usuario

Advantech

Advantech AIMB-785 Manual de usuario

Advantech

Advantech MIO-5250 Manual de usuario

Advantech

Advantech PCA-6029 Manual de usuario

Advantech

Advantech PCM-9376 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario