Advantech MIOe-DB5000 Manual de usuario

User Manual

MIOe-DB5000

MIOe Evaluation Board for MI/O-

Compact and MI/O-Ultra SBC

MIOe-DB5000 User Manual ii

The documentation and the software included with this product are copyrighted 2012

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right

to make improvements in the products described in this manual at any time without

notice. No part of this manual may be reproduced, copied, translated or transmitted

in any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable. How-

ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Intel® is a trademark of Intel® Technologies, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Cor-

poration.

Microsoft Windows® is a registered trademark of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Part No. 2006500000 Edition 1

Printed in China October 2012

iii MIOe-DB5000 User Manual

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be

free from defects in materials and workmanship for two years from the date of pur-

chase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Advantech, or which have been

subject to misuse, abuse, accident or improper installation. Advantech assumes no

liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of

our customers never need to use our repair service. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty period. For out-

of-warranty repairs, you will be billed according to the cost of replacement materials,

service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages you get when the problem

occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)

in a shippable container. A product returned without proof of the purchase date

is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

MIOe-DB5000 User Manual iv

Declaration of Conformity

This product has passed the CE test for environmental specifications. Test conditions

for passing included the equipment being operated within an industrial enclosure. In

order to protect the product from being damaged by ESD (Electrostatic Discharge)

and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo-

sure products.

FCC Class A

This equipment has been tested and found to comply with the limits for a Class A dig-

ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro-

vide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Opera-

tion of this device in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his/her own expense. The

user is advised that any equipment changes or modifications not expressly approved

by the party responsible for compliance would void the compliance to FCC regula-

tions and therefore, the user's authority to operate the equipment.

Technical Support and Assistance

1. Visit the Advantech website at http://support.advantech.com where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the

following information ready before you call:

–Product name and serial number

–Description of your peripheral attachments

–Description of your software (operating system, version, application software,

etc.)

–A complete description of the problem

–The exact wording of any error messages

Caution! There is a danger of a new battery exploding if it is incorrectly installed.

Do not attempt to recharge, force open, or heat the battery. Replace the

battery only with the same or equivalent type recommended by the man-

ufacturer. Discard used batteries according to the manufacturer’s

instructions.

v MIOe-DB5000 User Manual

Packing List

Before you begin installing your card, please make sure that the following materials

have been shipped:

1 MIOe-DB5000 development board

2 x Reset/Power button cables (P/N: 1700020235-01)

If any of these items are missing or damaged, contact your distributor or sales repre-

sentative immediately.

Ordering Information

* The DisplayPort Riser Card has both HDMI and DisplayPort. Each can be sup-

ported individually by signal setting on the MI/O main board.

** MIOe-DB5000-01A1E has 2 PCIe x1 and 1 Mini PCIe.

*** For USB 3.0 to work depends on if the MI/O mainboard supports USB 3.0 or not.

If the bundled MI/O main board doesn't support USB 3.0 explicitly, the USB connec-

tor supports USB 2.0 only.

Optional Accessories

* Only support Port B because there is only one DP channel from MIOe to Riser card,

default support HDMI port; DP port supported by request.

** Support by request

Part Number Description

9696EA2000E DisplayPort Riser Card*

PCA-COM232-00A1E 4 ports RS-232 Module**

PCA-COM485-00A1E 4 ports RS-422/485 Module**

MIOe-DB5000 User Manual vi

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well, or you cannot get it to work according to

the user's manual.

The equipment has been dropped and damaged.

The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C

(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT

SHOULD BE IN A CONTROLLED ENVIRONMENT.

16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES

ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

The sound pressure level at the operator's position according to IEC 704-1:1982 is

no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech

disclaims all responsibility for the accuracy of any statements contained herein.

vii MIOe-DB5000 User Manual

Contents

Chapter 1

Connector, Jumper and Switch Settings

...1

1.1 Introduction ...............................................................................................2

1.2 Block Diagram...........................................................................................2

Figure 1.1 Block Diagram............................................................2

1.3 Placement .................................................................................................3

1.4 Jumpers ....................................................................................................3

1.4.1 Jumper Description.......................................................................3

1.4.2 Jumper Table................................................................................4

Table 1.1: Jumper Table..............................................................4

1.5 Connector Table........................................................................................4

Table 1.2: Connector Table.........................................................4

1.6 Switch Table..............................................................................................5

Table 1.3: Switch Table...............................................................5

1.7 Jumper, Connector and Switch Pin Definition...........................................5

MIOe-DB5000 User Manual viii

Chapter 1

1Connector, Jumper

and Switch Setting

This chapter gives you the gen-

eral introduction to MIOe-DB5000

and instructions on jumper set-

tings, connectors information as

well as switch installation on the

MIOe-DB5000 evaluation board.

Sections include:

General Introduction

Block Diagram

Connector, Jumper and Switch

table

Connector, Jumper and Switch

Pin Definitions

MIOe-DB5000 User Manual 2

1.1 Introduction

MIOe-DB5000 is MIOe evaluation board for MI/O-Compact and MI/O-Ultra SBC with

standard ATX form factor. It’s compatible with MIOe, all circuit designs follow MI/O

Extension design guide. MIOe-DB5000 have flexible interfaces for verification and

various applications, including 1 display port, 3 PCIe, 1 mini PCIe, 1 SIM card holder,

1 USB 3.0, 1 USB 2.0, 1 LPC (Low Pin Count), 1 SMBus, 1 line out with amplifier, 1

SATA with power, 2 system FAN, and 1 +12V DC in.

1.2 Block Diagram

Figure 1.1 Block Diagram

Tabla de contenidos

Otros manuales de Placa madre de Advantech

Advantech

Advantech PCI-6880 Manual de usuario

Advantech

Advantech SIMB-A21 Manual de instalación y operación

Advantech

Advantech PCA-6752 Manual de instalación y operación

Advantech

Advantech ASMB-786 Guía del usuario

Advantech

Advantech PCM-4824 Manual de usuario

Advantech

Advantech SIMB-A21 Manual de instalación y operación

Advantech

Advantech AIMB-262 Manual de instalación y operación

Advantech

Advantech PCA-6028 Manual de usuario

Advantech

Advantech ASMB-785 Manual de usuario

Advantech

Advantech PCM-4386 Manual de instalación y operación

Advantech

Advantech EAX-R680RP Manual de usuario

Advantech

Advantech PCA-6155V Manual de instalación y operación

Advantech

Advantech PCA-6289 Manual de instalación y operación

Advantech

Advantech AIMB-782 Manual de usuario

Advantech

Advantech PCE-5125 Manual de instalación y operación

Advantech

Advantech AIMB-785 Manual de instalación y operación

Advantech

Advantech MIO-5272 Manual de usuario

Advantech

Advantech MIO-5250 Manual de usuario

Advantech

Advantech PCE-3032 Manual de usuario

Advantech

Advantech ASMB-820I Manual de usuario

Advantech

Advantech B+B SmartWorx Airborne WLNN-EK-DP551 Manual de usuario

Advantech

Advantech PCE-7210 Manual de usuario

Advantech

Advantech MIC-3396 Manual de usuario

Advantech

Advantech AIMB-276 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario