Advantech PCA-6166 Manual de usuario
PCA-6166
Full-size Super 7 Pentium®
MMX processor-based
PCI/ISA-bus CPU card
Copyright notice
This document is copyrighted, 1999, by Advantech Co., Ltd. All
rights are reserved. Advantech Co., Ltd. reserves the right to make
improvements to the products described in this manual at any time
without notice.
No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written
permission of Advantech Co., Ltd. Information provided in this
manual is intended to be accurate and reliable. However, Advantech
Co., Ltd. assumes no responsibility for its use, nor for any in-
fringements upon the rights of third parties which may result from its
use.
Acknowledgements
• Adaptec and EZ-SCSI are trademarks of Adaptec Inc.
• AWARD is a trademark of AWARD Software, Inc.
• AMD is a trademark of Advanced Micro Devices, Inc.
• IBM and PC are trademarks of International Business Machines
Corporation.
• Intel and Pentium are trademarks of Intel Corporation.
• MS-DOS is a trademark of Microsoft Corporation.
• SiS is a trademark of Silicon Integrated Systems Corporation.
All other product names or trademarks are the properties of their
respective owners.
Part No. 2006616600
1st Edition Printed in Taiwan September 1999
A Message to the Customer
Advantech customer services
Each and every Advantech product is built to the most exacting
specifications to ensure reliable performance in the harsh and
demanding conditions typical of industrial environments. Whether
your new Advantech equipment is destined for the laboratory or the
factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name Advantech has
come to be known.
Your satisfaction is our primary concern. Here is a guide to
Advantech’s customer services. To ensure you get the full benefit of
our services, please follow the instructions below carefully.
Technical support
We want you to get the maximum performance from your products.
So if you run into technical difficulties, we are here to help. For the
most frequently asked questions, you can easily find answers in your
product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone.
So please consult this manual first. If you still cannot find the answer,
gather all the information or questions that apply to your problem, and
with the product close at hand, call your dealer. Our dealers are well
trained and ready to give you the support you need to get the most
from your Advantech products. In fact, most problems reported are
minor and are able to be easily solved over the phone.
In addition, free technical support is available from Advantech
engineers every business day. We are always ready to give advice on
application requirements or specific information on the installation
and operation of any of our products.
PCA-6166 Series comparison table
Model PCA-6166 PCA-6166E PCA-6166S PCA-6166F
CPU: Intel PentiumfiMMX 166 ~ 233 MHz
AMD K6-2, K6-3, 500 MHz and faster
üü üü
System chipset: SiS 530 üü üü
BIOS: Award P&P Flash BIOS üü üü
L2 cache: 1 MB üü üü
Max. system RAM: 384 MB
(3 x 168-pin DIMM sockets) üü üü
ISA High Drive: Up to 64 mA üü üü
USB port üü üü
2 EIDE connectors üü üü
Solid state disk: Supports M-Systems’
DOCfi2000 Flash disk up to 144 MB üü üü
2 serial, 1 parallel ports üü üü
VGA: AGP/VGA (built-in on chip) üü üü
LAN: 10/100Base-T Ethernet
(Intel 82558 chipset) üü
SCSI: 32-bit PCIUltra2 SCSI
(Adaptec 7890 chipset) üü
Product warranty
Advantech warrants to you, the original purchaser, that each of its
products will be free from defects in materials and workmanship for
one year from the date of purchase.
This warranty does not apply to any products which have been
repaired or altered by persons other than repair personnel authorized
by Advantech, or which have been subject to misuse, abuse, accident
or improper installation. Advantech assumes no liability under the
terms of this warranty as a consequence of such events.
If an Advantech product is defective, it will be repaired or replaced at
no charge during the warranty period. For out-of-warranty repairs,
you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For
example, type of PC, CPU speed, Advantech products used, other
hardware and software used, etc.) Note anything abnormal and list
any on-screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your
manual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return
material authorization) number from your dealer. This allows us to
process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and
Replacement Order Card and a photocopy proof of purchase date
(such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for
warranty service.
5. Write the RMA number visibly on the outside of the package and
ship it prepaid to your dealer.
Initial Inspection
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 PCA-6166 Pentium®MMX single board computer
• 1CPU, and 1 cooling fan (optional)
• 1 PCA-6166 User's Manual
• Utility disks/CD with VGA BIOS
• IDE disks/CD
• Ethernet driver disks/CD (PCA-6166E/F only)
• SCSI driver disks/CD (PCA-6166S/F only)
• 1 FDD cable
• 2 EIDE HDD cables for ATA66
• 1 printer cable and 1 serial port cable
• 1 ivory cable for keyboard and mouse
• 1 SCSI single-end cable (PCA-6166S/F only)
• 1 USB cable (optional)
• 1 ATX-to-PS/2 power cable
If any of these items are missing or damaged, contact your distributor
or sales representative immediately.
We have carefully inspected the PCA-6166 mechanically and
electrically before shipment. It should be free of marks and scratches
and in perfect working order upon receipt.
As you unpack the PCA-6166, check it for signs of shipping damage.
(For example, damaged box, scratches, dents, etc.) If it is damaged or
it fails to meet the specifications, notify our service department or
your local sales representative immediately. Also notify the carrier.
Retain the shipping carton and packing material for inspection by the
carrier. After inspection, we will make arrangements to repair or
replace the unit.
Contents
Chapter 1 Hardware Configuration.............................. 1
1.1 Introduction........................................................................2
1.2 Features...............................................................................3
1.3 Specifications ......................................................................4
1.3.1 System.........................................................................4
1.3.2 Memory.......................................................................4
1.3.3 Input/Output ................................................................4
1.3.4 VGA interface
(PCA-6166/6166E/6166S/6166F only) .......................5
1.3.5 SCSI interface (PCA-6166S/6166F only)...................5
1.3.6 Ethernet LAN (PCA-6166E/6166F only) ...................5
1.3.7 SSD .............................................................................5
1.3.8 Industrial features .......................................................5
1.3.9 Mechanical and environmental specifications............5
1.4 Board Layout: Main Features ..........................................6
1.5 Jumpers and Connectors...................................................7
1.6 Board Layout: Jumper and Connector Locations ..........9
1.7 Safety Precautions............................................................10
1.8 Jumper Settings................................................................11
1.8.1 How to set jumpers ...................................................11
1.8.2 CPU clock and frequency ratio setting (SW1)..........11
1.8.3 Voltage regulator setting (SW2) ...............................13
1.8.4 CMOS clear (J1) .......................................................14
1.8.5 Watchdog timer output (J2) ......................................14
1.8.6 DiskOnChip®2000 Flash disk address select (J3)....15
1.9 System Memory................................................................17
1.9.1 Sample calculation: DIMM memory capacity..........17
1.9.2 Supplementary information about DIMMs ..............18
1.10 Memory Installation Procedures....................................19
1.11 CPU Installation...............................................................20
Chapter 2 Connecting Peripherals ............................ 21
2.1 Primary (CN1) and Secondary (CN2) IDE Connectors22
2.2 Floppy Drive Connector (CN3).......................................23
2.3 Parallel Port Connector (CN4) .......................................23
2.4 SCSI Connector (CN5) ....................................................24
2.5 USB Connector (CN6) .....................................................25
2.6 VGA Connector (CN7) ....................................................25
2.7 Ethernet Connector (CN8) ..............................................26
2.8 Serial Ports (CN9: COM1; CN10: COM2)....................26
2.9 PS/2 Keyboard and Mouse Connector (CN11) .............27
2.10 External Keyboard Connector (CN12) ..........................27
2.11 IR Connector (CN13).......................................................28
2.12 CPU Fan Connector (CN14) ...........................................28
2.13 Front Panel Connectors (CN16, CN17, CN18,
CN19 and CN21) ..............................................................29
2.13.1 Keyboard lock and power on LED (CN16) ............29
2.13.2 External speaker (CN17).........................................29
2.13.3 Reset (CN18)...........................................................29
2.13.4 IDE LED (CN19) ....................................................30
2.13.5 ATX soft power switch (CN21)..............................30
2.14 ATX Power Control Connectors (CN20 and CN21).....30
2.14.1 ATX feature connector (CN20) and soft power .........
switch connector (CN21) ........................................30
2.14.2 Controlling the soft power switch...........................31
Chapter 3 Award BIOS Setup ..................................... 33
3.1 Introduction......................................................................34
3.2 Entering Setup..................................................................34
3.3 Standard CMOS Setup....................................................35
3.4 BIOS Features Setup .......................................................36
3.4.1 Virus Warning...........................................................36
3.4.2 Boot Sequence...........................................................37
3.4.3 Boot Up Floppy Seek ................................................37
3.4.4 Boot Up NumLock Status .........................................38
3.4.5 Typematic Rate Setting.............................................38
3.4.6 Typematic Rate (Chars/Sec) .....................................38
3.4.7 Typematic Delay (msec) ...........................................38
3.4.8 Security Option .........................................................38
3.4.9 PCI/VGA Palette Snoop............................................39
3.4.10 OS Select for DRAM > 64MB................................39
3.4.11 Video BIOS Shadow ...............................................39
3.4.12 C8000-CBFFF Shadow / DC000-DFFFF Shadow .39
3.4.13 Cyrix 6 x 86/MII CPUID........................................39
3.5 CHIPSET Features Setup ...............................................40
3.5.1 SDRAM RAS to CAS Delay ....................................40
3.5.2 SDRAM RAS Precharge Time .................................40
3.5.3 SDRAM CAS Latency Time ....................................41
3.5.4 DRAM Opt RAS Precharge ......................................41
3.5.5 ISA Bus Clock Frequency.........................................41
3.5.6 Starting point of paging ............................................41
3.5.7 PCI Peer Concurrency...............................................41
3.5.8 Read Prefetch Memory RD.......................................41
3.5.9 Assert TRDY After Prefet ........................................41
3.5.10 AGP Aperture Size (MB)........................................42
3.5.11 Memory Hole At 15M-16M ...................................42
3.5.12 PCI Delayed Transaction ........................................42
3.6 Power Management Setup ..............................................43
3.6.1 Power Management ..................................................43
3.6.2 HDD Power Down ....................................................43
3.6.3 Soft-Off by PWR-BTTN...........................................44
3.6.4 HDD Ports Activity...................................................44
3.7 PCI Configuration Setup.................................................44
3.7.1 Resources Controlled By ..........................................45
3.7.2 Reset Configuration Data..........................................45
3.7.3 IRQ-xx assigned to : PCI/ISA PnP ...........................45
3.7.4 PCI IRQ Activated by ...............................................45
3.8 Load BIOS Defaults .........................................................46
3.9 Load Setup Defaults.........................................................46
3.10 Integrated Peripherals.....................................................46
3.10.1 IDE Primary Master/Slave PIO/UDMA Mode,
IDE Secondary Master/Slave PIO/UDMA Mode (Auto) 47
3.10.2 IDE Burst Mode......................................................47
3.10.3 IDE Data Port Post Write........................................47
3.10.4 IDE HDD Block Mode ...........................................47
3.10.5 Onboard FDC Controller ........................................47
3.10.6 Onboard Serial Port 1 (3F8H/IRQ4).......................47
3.10.7 Onboard Serial Port 2 (2F8H/IRQ3).......................48
3.10.8 Onboard Parallel Port (378H/IRQ7) .......................48
3.10.9 Parallel Port Mode (ECP + EPP) ............................48
3.10.10 ECP Mode Use DMA ...........................................48
3.11 Password Setting ..............................................................49
3.12 IDE HDD Auto Detection ................................................49
3.13 Save & Exit Setup ............................................................50
3.14 Exit Without Saving.........................................................50
Chapter 4 PCI SVGA Setup......................................... 51
4.1 Before You Begin .............................................................52
4.2 Driver Installation............................................................53
4.3 Windows 95/98 Drivers Setup Procedure ......................54
4.4 Windows NT Drivers Setup Procedure..........................58
Chapter 5 LAN Configuration..................................... 63
5.1 Introduction......................................................................64
5.2 Features.............................................................................64
5.3 Driver Installation............................................................65
5.4 Windows 95 Drivers Setup Procedure ...........................66
5.5 Windows 98 Drivers Setup Procedure ...........................72
5.6 Windows NT Drivers Setup Procedure..........................73
Chapter 6 SCSI Setup and Configurations................ 77
6.1 Introduction......................................................................78
6.2 Configuring the SCSI Adapter .......................................78
6.3 SCSI Terminators ............................................................79
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
Otros manuales de Placa madre de Advantech
Advantech
Advantech AIMB-708 Manual de usuario
Advantech
Advantech PCM-9372 Manual de usuario
Advantech
Advantech ASMB-820I Manual de usuario
Advantech
Advantech AIMB-554 Manual de usuario
Advantech
Advantech ASMB-782 Manual de instalación y operación
Advantech
Advantech AIMB-782 Manual de usuario
Advantech
Advantech ACP-2010MB Manual de usuario
Advantech
Advantech AIMB-U217 Manual de usuario
Advantech
Advantech PCM-4390 Manual de instalación y operación
Advantech
Advantech SMB-2501 Manual de usuario
Advantech
Advantech PCM-9579 Manual de instalación y operación
Advantech
Advantech AIMB-769 Manual de instalación y operación
Advantech
Advantech AIMB-205 Manual de usuario
Advantech
Advantech AIMB-744 Series Manual de usuario
Advantech
Advantech AIMB-213 Manual de usuario
Advantech
Advantech MIOe-DB2000 Manual de usuario
Advantech
Advantech ACP-2000MB Manual de usuario
Advantech
Advantech SIMB-U01 Manual de usuario
Advantech
Advantech ASMB-622 Manual de instalación y operación
Advantech
Advantech AIMB-256 Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
