Advantech IPMI-1000 Manual de instalación y operación

IPMI-1000 Startup Manual 1

Before you begin installing your card, please make sure that

the following items have been shipped:

1. IPMI-1000 module x 1

2. Startup manual x 1 PN: 20061IPM100

3. Screw x 2 P/N: 19350304A0

4. Warranty Card x 1 P/N: 2190000902

5. VGA cable x 1 P/N: 1700020805

If any of these items are missing or damaged, please con-

tact your distributor or sales representative immediately.

IPMI-1000

IPMI module, AST2300 chipset

Startup Manual

General Features

• Out of band (OS independent)

• User management

• Remote control

• System health

• Maintenance

SBC Support List

PPCE-7127G2-00A1E

PCE-5126WG2-00A1E

Note: For more SBC support list, please visit our website.

Mechanical and Environmental

• Dimensions: 68 mm x 31.5 mm

• Power supply type: 5 VSB

• Power requirements: 5 VSB @ 55mA

• Operating temperature: 0 ~ 60° C

• Operating humidity: 60° C @ 85% RH, Non-Condensing

• Storage temperature: -40 ~ 85° C

• Storage humidity: 60° C @ 95% RH, Non-Condensing

• Weight: 0.48 kg

There are four connectors on the module and one of them

is used to connect with SBC. The below table lists the func-

tions of these connectors.

Connectors

Label Function

BMC1 IPMI connector

VGA1 VGA1 connector

MRCROSD1 Local media device

IPMB Reserved

Specications

Packing List

For more information on this and other Advantech

products, please visit our website at:

http://www.advantech.com

http://www.advantech.com/eplatform

For technical support and service, please visit our

support website at:

http://support.advantech.com

This manual is for the IPMI-1000 Series.

Part No. 2006IPM100

Print in China

1st Edition

October 2012

Connectors

2 IPMI-1000 Startup Manual

1. Please connect IPMI module to the SBC BMC1

connector using the following steps.

1). Connector BMC1 and the screw holes on your SBC.

If your SBC is either PCE-7127 or PCE-5126WG2,

you will ﬁnd two screw holes around BMC1.

Figure1: Locations of BMC1 & Screw holes on SBC

2). Connector BMC1 and standoffs on IPMI-1000.

Figure 2: Locations of BMC1 & standoffs on module

3). Connect the SBC and IPMI-1000 with BMC1

connector.

Figure 3: Assembling module

4). Align the screw holes, and ﬁx securely with the

screws.

Figure 4: Fixing the screws

2. After setting up the hardware conﬁguration, users

should also complete BIOS settings. Please check the

information below to ﬁnd out corresponding instructions

to enable the IPMI function.

Enter Server Mgmt, “BMC Support” and “Wait for BMC”

are [Enabled] as default setting.

Figure 5: BMC support setting

Enter BMC network conﬁguration, the default

Conﬁguration Address source is [Unspeciﬁed]. Change

Address source to [Static], there is a default IP address

for user setting in the ﬁrst time.

Figure 6: BMC network conguration setting

Note: At ﬁrst time initialing IPMI-1000, it may take around

30~40 seconds before posting BIOS. When F/W is ready,

the LED light of module will be ﬂashing.

Installation Guide

IPMI-1000 Startup Manual 3

Figure 7: IPMI-1000 Top side Board Layout

Figure 8: IPMI-1000 Bottom side Board Layout

Board Layout and Dimension

Otros manuales para IPMI-1000

Otros manuales de Unidad de control de Advantech

Advantech

Advantech WISE-1540 Manual de usuario

Advantech

Advantech PCM-3116 Manual de instalación y operación

Advantech

Advantech IPMI-2000 Manual de instalación y operación

Advantech

Advantech PCM-3910 Manual de instalación y operación

Advantech

Advantech RISC Module SOM-A2552 Manual de usuario

Advantech

Advantech PCM-3110 Manual de usuario

Advantech

Advantech SOM-6898 Manual de usuario

Advantech

Advantech PCM-3665 PC/104-Plus Manual de instalación y operación

Advantech

Advantech iDAQ-815 Manual de usuario

Advantech

Advantech ADAM-3656 Manual de instalación y operación

Advantech

Advantech USB-5801 Manual de instalación y operación

Advantech

Advantech SOM-5893 Manual de usuario

Advantech

Advantech Adam 4000 Series Manual de usuario

Advantech

Advantech IPMI-1000 Manual de instalación y operación

Advantech

Advantech PCM-3531 Manual de instalación y operación

Advantech

Advantech Adam 4000 Series Manual de usuario

Advantech

Advantech WISE-2211 Manual de instalación y operación

Advantech

Advantech WISE-4610 Series Manual de instalación y operación

Advantech

Advantech EH-8100 Manual de usuario

Advantech

Advantech SOM-5897 Manual de usuario

Advantech

Advantech AIW-357 DK-G1P Manual de usuario

Advantech

Advantech ADAM-3750 3-Wire Series Manual de instalación y operación

Advantech

Advantech iDAQ-817 Manual de usuario

Advantech

Advantech WISE-1840 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario