ADTRAN 1200864L1 Manual de usuario

NetVanta Analog Modem Dial Backup Interface Module (DIM) P/N 1200864L1

For more detailed documentation, visit us online at www.adtran.com.

Quick Start Guide

SPECIFICATIONS

Features Supported Standards: ITU-T V.90

Async

Compliance FCC Part 15 Class A, EN 55022 Class A, EN 55024,

EN 61000-3-2, EN 61000-3-3

ACTA/FCC Part 68, IC CS-03

UL/CUL 60950

Physical Dimensions: 2.5-inch W x 3.75-inch D

Operating Temperature: 0°C to 50°C

Storage Temperature: -20°C to 70°C

Relative Humidity: Up to 95 percent, noncondensing

NetVanta modules should be installed only in

NetVanta Series products.

ANALOG MODEM DBU CONNECTION PINOUTS

INSTALLATION INSTRUCTIONS

1. Remove power from the base unit.

2. If the Network Interface Module (NIM) is already in the NetVanta

chassis, release the pins at both edges of the NIM faceplate and

slide the module out of the chassis.

3. Carefully align the P1 connector on the NIM with the J1 connector

on the analog modem DIM. Using only fingertip pressure so that

neither circuit board bends or flexes, ensure that the connectors

are firmly seated. Secure the analog modem DIM to the NIM

using the screws and standoff posts supplied.

4. Slide the NIM with the analog modem DIM attached into the

NetVanta option slot until the NIM is firmly seated against the

chassis.

5. Secure the pins at both edges of the NIM.

6. Connect the cables to the associated device(s).

7. Complete installation of the base unit.

8. Restore power to the base unit.

For NetVanta modules with outside plant

connections, ensure that all cables are

removed from the module before installing

or removing it from the NetVanta chassis.

Pin Name Description

1-3 — Unused

4 R Network-Ring

5TNetwork-Tip

6-8 — Unused

Important: For additional details on product

features, specifications, installation, and safety,

refer to the appropriate Hardware Installation

Guide on the ADTRAN OS System Documentation

CD shipped with the base unit and available online

at www.adtran.com.

NetVanta Analog Modem Dial Backup Interface Module (DIM) P/N 1200864L1

For more detailed documentation, visit us online at www.adtran.com.

Quick Start Guide

ANALOG MODEM DIM COMMANDS

alias <“text”>

Populates the ifAlias OID (Interface Table MIB of RFC2863) for all physical

and virtual interfaces when using SNMP management station.

caller-id override [always <number> | if-no-CID <number>]

Configures the unit to replace caller ID information with a user-specified

number. Use the no form of this command to disable any caller ID overrides.

always <number> Always forces replacement of the incoming

caller ID number with the number given.

if-no-CID <number> Replaces the incoming caller ID number with

the number given only if there is no caller ID

information available for the incoming call.

description <text>

Identifies the specified interface, both physical and virtual (for example,

circuit ID, contact information, etc.), using up to 80 alphanumeric characters.

dialin

Enables the modem for remote console dial-in, disabling the use of the

modem for dial-backup.

init-string <string>

Specifies an initialization string using standard AT commands. Use the no

form of this command to return to the default initialization string.

<string> Specifies an initialization string using standard

AT commands. This string must start with AT

and cannot contain spaces. The default string

is ate0q0v1x4\n0.

shutdown

Disables the interface (both physical and virtual) so that no data will be

passed through. Use the no version of this command to turn on the interface

and allow it to pass data.

Otros manuales de Hardware de red de ADTRAN

ADTRAN

ADTRAN NetVanta 7000 Series Manual de usuario

ADTRAN

ADTRAN DSU IV ESP Manual de usuario

ADTRAN

ADTRAN T1 Nx64 HTU-R Manual de instrucciones

ADTRAN

ADTRAN NetVanta Series Manual de usuario

ADTRAN

ADTRAN Total Reach DDS-R Manual de instrucciones

ADTRAN

ADTRAN DSU 5600 Manual de usuario

ADTRAN

ADTRAN GPON TA352 Manual de usuario

ADTRAN

ADTRAN 1200221L1 Manual de usuario

ADTRAN

ADTRAN 24-Port DSLAM Access Module IADSL Module Manual de usuario

ADTRAN

ADTRAN jobAid Total Access 838 Manual de usuario

ADTRAN

ADTRAN Total Access 604 Guía del usuario

ADTRAN

ADTRAN DS3 MX Manual de usuario

ADTRAN

ADTRAN 1442300G1 Manual de usuario

ADTRAN

ADTRAN Smart 16e Shelf Manual de usuario

ADTRAN

ADTRAN Cable T1 ESF CSU ACE Manual de usuario

ADTRAN

ADTRAN Octal IDSL DSLAM Octal IDSL Manual de usuario

ADTRAN

ADTRAN Total Access 300 Series Manual del producto

ADTRAN

ADTRAN Dual Nx56/64 Manual de usuario

ADTRAN

ADTRAN NetVanta NetVanta ADSL NIM Manual de usuario

ADTRAN

ADTRAN DSX 1 Manual de usuario

ADTRAN

ADTRAN SHDSL NxNTU Manual de instrucciones

ADTRAN

ADTRAN T400 Manual de instrucciones

ADTRAN

ADTRAN 1202803L1 Manual de usuario

ADTRAN

ADTRAN DDS T200 Manual de instrucciones

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario