ADTRAN 1202295L1 Manual de usuario

TSU ACE

USER MANUAL

Part Number 1202295L1

61202295L1-1A

April 2003

Trademarks TSU ACE User Manual

Trademarks

Any brand names and product names included in this manual are trademarks, registered trademarks, or

trade names of their respective holders.

T-Watch PRO®is a registered trademark of ADTRAN, Inc.

To the Holder of the Manual

The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change

the contents without prior notice.

In no event will ADTRAN be liable for any special, incidental, or consequential damages or for

commercial losses even if ADTRAN has been advised thereof as a result of issue of this publication.

About this Manual

This manual provides a complete description of the TSU ACE system and system software. The purpose of

this manual is to provide the technician, system administrator, and manager with general and specific

information related to the planning, installation, operation, and maintenance of the TSU ACE. This manual

is arranged so that needed information can be quickly and easily found.

901 Explorer Boulevard

P.O. Box 140000

Huntsville, AL 35814-4000

Phone: (256) 963-8000

Printed in U.S.A.

TSU ACE User Manual Revision History

Revision History

Conventions

Document

Revision Date Description of Changes

A April 2003 Initial release of new part number.

Notes provide additional useful information.

Cautions signify information that could prevent service interruption.

Warnings provide information that could prevent damage to the equipment or

endangerment to human life.

Safety Instructions TSU ACE User Manual

Safety Instructions

When using your telephone equipment, please follow these basic safety precautions to reduce the risk of

fire, electrical shock, or personal injury:

1. Do not use this product near water, such as a bathtub, wash bowl, kitchen sink, laundry tub, in a

wet basement, or near a swimming pool.

2. Avoid using a telephone (other than a cordless-type) during an electrical storm. There is a remote

risk of shock from lightning.

3. Do not use the telephone to report a gas leak in the vicinity of the leak.

4. Use only the power cord, power supply, and/or batteries indicated in the manual. Do not dispose of

batteries in a fire. They may explode. Check with local codes for special disposal instructions.

5. The socket-outlet shall be installed near the equipment and shall be easily accessible.

Save These Important Safety Instructions

Double pole/neutral fusing.

TSU ACE User Manual Compliance Information

Compliance Information

Product: TSU ACE

Model Numbers: 1202295L1

FCC Registration Number: US: HDCDENAN1203060L1

FCC regulations require that the following information be provided to the customer:

1. This equipment complies with Part 68 of the FCC rules. On the side or bottom of this equipment is

a label that contains, among other information, the FCC Registration Number and Ringer

Equivalence Number (REN), if applicable, for this equipment. If required, this information must

be given to the telephone company.

2. An FCC-compliant telephone cord and modular plug is provided with this equipment. This

equipment is designed to be connected to the telephone network or premises wiring using a

compatible modular jack which is Part 68-compliant. See installation instructions for details.

3. If your telephone equipment causes harm to the telephone network, the telephone company may

discontinue your service temporarily. If possible, they will notify you in advance. But if advance

notice isn’t practical, you will be notified as soon as possible. You will be advised of your right to

file a complaint with the FCC.

4. Your telephone company may make changes in its facilities, equipment, operations, or procedures

that could affect the proper operation of your equipment. If they do, you will be given advance

notice to give you an opportunity to maintain uninterrupted service.

5. If you experience trouble with this equipment, please contact ADTRAN at (256) 963-8722 for

repair/warranty information. The telephone company may ask you to disconnect this equipment

from the network until the problem has been corrected or until you are sure the equipment is not

malfunctioning.

6. This unit contains no user-serviceable parts.

7. The FCC recommends that the AC outlet to which equipment requiring AC power is to be installed

is provided with an AC surge arrester.

8. The REN is used to determine the quantity of devices which may be connected to the telephone

line. Excessive RENs on the telephone line may result in the devices not ringing in response to an

incoming call. In most, but not all areas, the sum of RENs should not exceed five (5.0). To be

certain of the number of devices that may be connected to a line, as determined by the total RENs,

contact the local telephone company.

9. The following information may be required when applying to your local telephone company for

leased line facilities.

Service Type REN/SOC FIC USOC

1.544 Mbps - SF 6.0 F 04DU9-BN RJ-48C

1.544 Mbps - SF and B8ZS 6.0 F 04DU9-DN RJ-48C

1.544 Mbps - ESF 6.0 F 04DU9-1KN RJ-48C

1.544 Mbps - ESF and B8ZS 6.0 F 04DU9-1SN RJ-48C

Federal Communications Commission Radio Frequency Interference Statement TSU ACE User Manual

Federal Communications Commission Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio frequencies. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

Affidavit Requirements for Connection to Digital Services

• An affidavit is required to be given to the telephone company whenever digital terminal equipment

without encoded analog content and billing protection is used to transmit digital signals containing

encoded analog content which are intended for eventual conversion into voiceband analog signals and

transmitted on the network.

• The affidavit shall affirm that either no encoded analog content or billing information is being

transmitted or that the output of the device meets Part 68 encoded analog content or billing protection

specifications.

• End user/customer will be responsible for filing an affidavit with the local exchange carrier when

connecting unprotected customer premise equipment (CPE) to 1.544 Mbps or subrate digital services.

• Until such time as subrate digital terminal equipment is registered for voice applications, the affidavit

requirement for subrate services is waived.

Shielded cables must be used with this unit to ensure compliance with Class A FCC limits.

Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

TSU ACE User Manual Affidavit for Connection of Customer Premises Equipment

Affidavit for Connection of Customer Premises Equipment

to 1.544 Mbps and/or Subrate Digital Services

For the work to be performed in the certified territory of ___________________ (telco name)

State of ________________

County of ________________

I, _______________________ (name), ____________________________________ (business address),

____________________ (telephone number) being duly sworn, state:

I have responsibility for the operation and maintenance of the terminal equipment to be connected

to 1.544 Mbps and/or ________ subrate digital services. The terminal equipment to be connected

complies with Part 68 of the FCC rules except for the encoded analog content and billing protection

specifications. With respect to encoded analog content and billing protection:

( ) I attest that all operations associated with the establishment, maintenance, and adjustment of the digital

CPE with respect to analog content and encoded billing protection information continuously complies

with Part 68 of the FCC Rules and Regulations.

( ) The digital CPE does not transmit digital signals containing encoded analog content or billing

information which is intended to be decoded within the telecommunications network.

( ) The encoded analog content and billing protection is factory set and is not under the control of the

customer.

I attest that the operator(s)/maintainer(s) of the digital CPE responsible for the establishment,

maintenance, and adjustment of the encoded analog content and billing information has (have) been

trained to perform these functions by successfully having completed one of the following (check

appropriate blocks):

( ) A. A training course provided by the manufacturer/grantee of the equipment used to encode analog

signals; or

( ) B. A training course provided by the customer or authorized representative, using training materials

and instructions provided by the manufacturer/grantee of the equipment used to encode analog

signals; or

( ) C. An independent training course (e.g., trade school or technical institution) recognized by the

manufacturer/grantee of the equipment used to encode analog signals; or

( ) D. In lieu of the preceding training requirements, the operator(s)/maintainer(s) is (are) under the

control of a supervisor trained in accordance with _________ (circle one) above.

Affidavit for Connection of Customer Premises Equipment TSU ACE User Manual

I agree to provide ______________________ (telco’s name) with proper documentation to demonstrate

compliance with the information as provided in the preceding paragraph, if so requested.

_________________________________Signature

_________________________________Title

_________________________________ Date

Transcribed and sworn to before me

This ________ day of _______________, _______

_________________________________

Notary Public

My commission expires:

_________________________________

TSU ACE User Manual Industry Canada Compliance Information

Industry Canada Compliance Information

Notice: The Industry Canada label applied to the product (identified by the Industry Canada logo or the

“IC:” in front of the certification/registration number) signifies that the Industry Canada technical

specifications were met.

Notice: The Ringer Equivalence Number (REN) for this terminal equipment is supplied in the

documentation or on the product labeling/markings. The REN assigned to each terminal device indicates

the maximum number of terminals that can be connected to a telephone interface. The termination on an

interface may consist of any combination of devices subject only to the requirement that the sum of the

RENs of all the devices should not exceed five (5).

Canadian Emissions Requirements

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus

as set out in the interference-causing equipment standard entitled “Digital Apparatus,” ICES-003 of the

Department of Communications.

Cet appareil numérique respecte les limites de bruits radioelectriques applicables aux appareils numériques

de Class A prescrites dans la norme sur le materiel brouilleur: “Appareils Numériques,” NMB-003 edictee

par le ministre des Communications.

Warranty TSU ACE User Manual

Warranty

ADTRAN will replace or repair this product within the warranty period if it does not meet its published

specifications or fails while in service. Warranty information can be found at www.adtran.com/warranty.

Product Registration

Registering your product helps ensure complete customer satisfaction. Please take time to register your

products on line at www.adtran.com. Click Service/Support on the top of the page, and then click Product

Registration under Support.

Customer Service, Product Support Information, and Training

ADTRAN will replace or repair this product within the warranty period if it does not meet its published

specifications or fails while in service. Warranty information can be found at www.adtran.com/warranty.

A return material authorization (RMA) is required prior to returning equipment to ADTRAN. For service,

RMA requests, training, or more information, use the contact information given below.

Repair and Return

If you determine that a repair is needed, please contact our Customer and Product Service (CAPS)

department to have an RMA number issued. CAPS should also be contacted to obtain information

regarding equipment currently in house or possible fees associated with repair.

Identify the RMA number clearly on the package (below address), and return to the following address:

Pre-Sales Inquiries and Applications Support

Your reseller should serve as the first point of contact for support. If additional pre-sales support is needed,

the ADTRAN Support web site provides a variety of support services such as a searchable knowledge

base, latest product documentation, application briefs, case studies, and a link to submit a question to an

Applications Engineer. All of this, and more, is available at:

When needed, further pre-sales assistance is available by calling our Applications Engineering

Department.

CaPS Department (256) 963-8722

ADTRAN Customer and Product Service

901 Explorer Blvd. (East Tower)

Huntsville, Alabama 35806

RMA # _____________

http://support.adtran.com

Applications Engineering (800) 615-1176

Tabla de contenidos

Otros manuales de Hardware de red de ADTRAN

ADTRAN

ADTRAN TRACER 4x03 Manual de usuario

ADTRAN

ADTRAN NetVanta 838 Manual de usuario

ADTRAN

ADTRAN Ethernet Over Bonded Copper MX3112 Manual de usuario

ADTRAN

ADTRAN T200 HTU-R Manual de instrucciones

ADTRAN

ADTRAN T200 IDSL Manual de instrucciones

ADTRAN

ADTRAN Total Access 604 Guía del usuario

ADTRAN

ADTRAN Total Access SHDSL LTU Manual de instrucciones

ADTRAN

ADTRAN TOTAL ACCESS 600R Manual de usuario

ADTRAN

ADTRAN TA 544 Manual de usuario

ADTRAN

ADTRAN NIU3 Manual de instrucciones

ADTRAN

ADTRAN SFP Series Manual de usuario

ADTRAN

ADTRAN E1 Manual de usuario

ADTRAN

ADTRAN Total Access 850 Manual de usuario

ADTRAN

ADTRAN NetVanta 1531 Series Manual

ADTRAN

ADTRAN Dial Backup Interface Module 1204006L2 Manual de usuario

ADTRAN

ADTRAN DS3 NIU3 Manual de usuario

ADTRAN

ADTRAN Total Reach DDS-DP 5 Series Manual de instrucciones

ADTRAN

ADTRAN TRACER 4x06 Manual de referencia

ADTRAN

ADTRAN NetVanta 834 Manual del propietario

ADTRAN

ADTRAN Total Access 351 Manual de usuario

ADTRAN

ADTRAN TSU 120 Manual de usuario

ADTRAN

ADTRAN XFP Manual de usuario

ADTRAN

ADTRAN 1442980G1C Manual de usuario

ADTRAN

ADTRAN T1 CSU ACE Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario