ADT DSC Impassa Manual de usuario

For a detailed review of the entire system, please view the DSC Impassa system manual.

Arm and Disarm

Arm:

To arm all sensors in AWAY mode when you are leaving the premises, press and hold [AWAY] or enter

your [security code] + [*] + [0] to Quick Arm.

To arm all sensors in STAY mode when you are not leaving the premises, press and hold [STAY] +

[security code].

Disarm:

To disarm, enter your [security code].

Battery

The DSC Impassa operates on the 3600 mAh battery.

Loss of AC power and use of backup battery power is indicated by Loss of AC Power.

Quick Guide: DSC Impassa

A low battery condition is indicated by Service Required.

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally left unarmed or to

access a protected area when the system is armed.

To bypass a zone, press [*] to enter the function menu.

Press [1] or [*], then your [security code].

Enter the two digit number of the zone to be bypassed or use the [<>] keys to find the zone.

Press [*] to select a zone.

To exit bypassing mode and return to Ready state, press [#].

To unbypass a zone, simply arm and disarm your system.

Change Time and Date

Press [*] + [6] + [Master security code] to enter the programming menu.

Use [<>] to find [Time and Date Programming], then press [*].

Enter the time in 24-hour format, i.e., 16:30 for 4:30pm.

Enter the date in MM:DD:YY format, i.e., 03/02/15 for March 2, 2015.

Press [#] to exit.

Chimes and Beeps

When your system is in chime mode, a chime will sound three tones whenever a protected door/window is

opened.

To turn the door chime function on or off, press and hold the [Chime] key for two seconds or press [*]

+ [4].

Reset

To clear the display after an alarm event, first press [*] + [3] to view the event.

To clear the event history, arm, and then disarm your system with your [security code].

To clear the display after a fire alarm, hold the [Reset] button for several seconds to clear the fire

alarm history.

Trouble Condition alarms will clear from the display when the condition no longer exists.

Security Codes

You can program up to 16 additional user codes and attributes. Additional users will be restricted to arming

and disarming functions, while the Master user code can perform all functions.

To program a new user, press [*] + [5] + [Master security code].

Enter the two digit number to be programmed, i.e., 06 for Access Code 6 or use the [<>] to find the

desired user code and press [*] to select.

Enter the new user’s new access code.

Continue adding additional user codes or press [#] to exit.

To erase an access code, select the code using [*] as the first digit. The system will automatically erase

the access code.

Some user codes have been pre-programmed:

User Level

Explanation

User Code

Master

Can perform all functions and assign codes.

Can only be changed by

an installer.

Supervisor

Similar to Master level, but can be changed without

requiring an installer.

[1]

Duress

Code secretly sends a duress report. Any user code

can be made a Duress code.

[2]

Zone Bypassing

Can manually bypass zones and arm/disarm the

system.

[3]

Phone Access

User can specify which user codes can be used for

remote access via SMS.

[4]

For future use

Reserved for future use.

[5], [6]

Onetime User

Code

Can disarm the system once per day. Reset daily at

midnight.

[8]

Users can also be assigned attributes, like the Bell Squawk Attribute, for example, which generates a sound

when that user arms and disarms the system.

For a complete list of User Code Attributes please see the DSC Impassa system manual.

To assign user attributes, enter [*] + [5] + [Master/Supervisor code] + [9] + [user code]/[scroll to user

code] + [*] + [attribute code] + [*].

Trouble Conditions

When a trouble condition is detected, the Trouble or System indicator will turn on and the keypad will beep

every 10 seconds.

To view the Trouble Condition, press [*] + [2].

To silence the Trouble Condition beeps, press [#].

For a list of possible Trouble Conditions, please see the DSC Impassa system manual.

Volume

The buzzer provides audible confirmation that a command to the panel has been executed.

The buzzer has 21 different levels of volume.

To adjust the buzzer level, press [*] + [6] + [Master code].

Use the [<>] buttons to scroll to [Buzzer Control], then press [*] to select.

Use the [<>] to scroll to the desired level, then press [#] to exit.

To disable the buzzer, choose level [00].

Tabla de contenidos

Otros manuales de Sistema de seguridad de ADT

ADT

ADT Smart Home PM360-R Manual de usuario

ADT

ADT ADTHYBWL Series Manual de usuario

ADT

ADT Safewatch Manual de usuario

ADT

ADT ADTHYBWL Series Manual de usuario

ADT

ADT IGB-02 Manual de usuario

ADT

ADT NT9005 V1.0 NA Manual de usuario

ADT

ADT Smart Home PM360 Manual de usuario

ADT

ADT SAFEWATCH EZ Manual de usuario

ADT

ADT Ademco Vista 20P/PSIA Manual de usuario

ADT

ADT Safewatch Quick Connect Plus Manual de usuario

ADT

ADT L5000 Lynx Manual de uso y cuidado

ADT

ADT Security System 4112 Manual de usuario

ADT

ADT On-The-Go Manual de usuario

ADT

ADT ADTHYBWL Series Manual de usuario

ADT

ADT ADT7AIO Series Manual de instrucciones

ADT

ADT Safewatch Pro 3000 Guía del usuario

ADT

ADT BHS-3000C Manual de usuario

ADT

ADT BHS-3000C Manual de usuario

ADT

ADT SA10ADTEG Instrucciones de funcionamiento

ADT

ADT ACCORD XPC Manual de usuario

ADT

ADT ADT7AIO Series Manual de instrucciones

ADT

ADT On-The-Go Emergency Response System Manual de usuario

ADT

ADT ADT2X16AIO Instrucciones de montaje

ADT

ADT Ademco Vista 20 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario