ADT DSC 9047 Manual de usuario

For a detailed review of the entire system, please view the DSC 9047 system manual.

Arm and Disarm

Arm:

To arm all sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY] key

for two seconds, or enter your [security code] and exit before the exit delay expires.

To arm all sensors in STAY mode without interior sensors armed, press and hold the [STAY] key for

two seconds, or enter your [security code] and do not leave the premises.

Disarm:

To disarm, enter your [security code] before the entry delay expires.

Battery

The DSC Power Series 9047 operates on the 7.2V Battery Pack.

Loss of AC power and use of backup battery power is indicated by NO AC.

A low battery condition is indicated by Low Bat.

For instructions on replacing your battery, please visit our Battery Replacement Page.

Quick Guide:

DSC 9047

Bypassing Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, the function menu by pressing [*] again to reach [Zone Bypass].

Press either [1] or [*], then your [security code].

Enter the zone number to be bypassed or use the [<] [>] keys to locate the zone number + [*]

When a zone is correctly bypassed, a [B] will appear next to the zone number on the display.

Press [#] to exit.

To unbypass, repeat the bypass procedure on arm and disarm your system.

Change Date and Time

To change date and time:

Press [*] + [6] + [Master security code] + [1].

Use the [<] [>] to find the [Time and Date] menu option, then press [*] to select.

Enter the minutes and hours in 24-hour format, i.e., 16:34 for 4:45 pm.

Enter the date, months, and year in MM:DD:YY format, i.e., 082317 for August 13, 2017.

Press [#] to exit.

Chimes and Beeps

When your system is in chime mode, a chime alert will sound three tones whenever a protected door/window

is opened.

To turn chime mode on and off, hold [CHIME] for several seconds or press [*] + [4].

Reset

To clear the display after an alarm event, arm and disarm your system.

Security Codes

Your system allows for up to 16 additional users, however only the Master user can program user codes and

attributes.

To program a new user, press [*] + [5] + [Master security code].

Enter the two-digit number to be programmed, i.e., 06 for Access Code 6.

Enter the new user’s new code.

Continue adding additional user codes or press [#] to exit.

To erase an access code, press [*] + [5] [Master code] + [user access code] + [*].

Press [#] to exit.

Trouble Conditions

When a Trouble Condition is detected, the word ‘FAULT’will be displayed on the panel.

To view the Trouble Condition, press [*] + [2] and use the [<] [>] to scroll.

To silence the Trouble Condition beeps, press [#].

Volume

To adjust the buzzer volume level, press [*] + [6] + [Master code].

Use the [<] [>] keys to scroll to [Buzzer Control] and then press [*].

Once the desired volume has been selected, press [#] to save the selection.

Tabla de contenidos

Otros manuales de Sistema de seguridad de ADT

ADT

ADT TSSC Instrucciones de montaje

ADT

ADT Security System 4112 Manual de usuario

ADT

ADT Safewatch QuickConnect Plus Instrucciones de funcionamiento

ADT

ADT On-The-Go Manual de usuario

ADT

ADT DSC Impassa Manual de usuario

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Manual de usuario

ADT

ADT Security System D7412 Manual de usuario

ADT

ADT FOCUS CADET Manual de usuario

ADT

ADT SAFEWATCH PRO Manual de usuario

ADT

ADT Galaxy 8 Manual de usuario

ADT

ADT Ademco Vista 20P/PSIA Manual de usuario

ADT

ADT NT9005 V1.0 NA Manual de usuario

ADT

ADT iCenter 8142ADT Manual de usuario

ADT

ADT Safewatch Pro 3000 Manual de usuario

ADT

ADT PremisePro none Manual de usuario

ADT

ADT Ademco Vista 20 Manual de usuario

ADT

ADT Safewatch Pro 3000 Instrucciones de funcionamiento

ADT

ADT SASW3000EN Manual de usuario

ADT

ADT On-The-Go Emergency Response System Manual de usuario

ADT

ADT Safewatch QuickConnect Plus Manual de usuario

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Instrucciones de montaje

ADT

ADT Keychain Remote Manual de usuario

ADT

ADT IGB-02 Manual de usuario

ADT

ADT Garda Response PM30 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario