ADT Safe-N-Go Manual de usuario

Quick Start Guide

ADT Safe-N-Go

Getting to know your device

SOS button

Silent mode button

LED light

Speaker

Microphone

Manual test button

Lanyard hole

Charging contacts

LED light

Screw holes

Charging your device

The charging base light will glow when charging and turn solid when

fully charged.

Charging base

• Place the device on the charging base.

• Connect the USB cable from charging base to the AC adaptor.

For the first time use, please fully charge the battery for around 2-3

hours.

When the battery level falls below 20%, the device will give a voice

prompt of “low battery alarm”.

Tip

Switching the device ON/OFF

• To turn on the device: press the CALL button for 1 second, all

the LEDs will flash rapidly. The device can also be turned on

automatically by charging via magnetic USB cable or put it into

the docking station.

• To turn off the device: press and hold the side button and SOS

button together for 3 seconds until the LEDs turn off.

What do the lights mean?

Cellular signal indicator - Green

Positioning indicator - Blue

Power indicator - Red

Green Light shows a single ash

rapidly every 3 seconds

Light shows a double ash

rapidly every 3 seconds

Means The device has a stable

Cellular signal

The device is registered to

the Cellular network

Blue

Light shows

a single ash

rapidly every 3

seconds

Light shows a

double ash rapidly

every 3 seconds

Light Off

Means

The device

has no latest

location x

The device has

latest location x

The device is

not xing the

latest location

Red Red Blinking Quickly Red Off or blinking slowly

Means Battery power is lower than

20% The device is charging

Red Red ON (solid) Red shows a double ash

rapidly every 3 seconds

State Device has been fully

charged Bluetooth Low Energy

Activating an SOS alarm

Activate SOS on docking station

Press twice

Voice prompt or

Vibration indicating

SOS alert activation

When you need help, press the SOS button twice, you will hear a voice

prompt of activating an SOS alarm. Voice prompt will say “SOS alert

has been activated, click SOS to Stop”. This will prompt the Alarm

Response process. Only click SOS again in case of false alarm.

Note: Only works if ADT Safe-N-Go device is connected to the docking

station via Bluetooth and is in the proximity of 10-15 metres.

Charging contacts

LED light

SOS button

Silent Mode Button

• Double-click this button to turn off voice warnings, double-click the

button again to turn on voice warnings.

• Put device on charging base more than 30 seconds, and they will

be paired automatically via Bluetooth.

De-Activating an SOS alarm

In the case of a false alarm, press SOS button once after, you hear

a voice prompt of activating an SOS alarm. Voice prompt will say

“SOS alert has been activated, click SOS to Stop”. Only click SOS

again in case of false alarm. Voice prompt will say “Alarm has been

cancelled” to confirm.

Specifications

Cautions

• Dimension: 62mm*47mm*17mm

• Weight: 53g

• Battery: Rechargeable, 3.7V, l000mAh

• Charging voltage: 5V DC

• Waterproof: IP67

• 4 locating technologies: GPS, BLE, WIFI, LBS

Please comply with the instructions to extend the unit life:

• Don’t use & store the unit in dusty places.

• Don’t put the unit in overheated or over cooled places.

• Clean the unit with a piece of dry cloth. Don’t clean with chemicals

or detergent.

• Don’t disassemble or refit the unit.

• Using other batteries will cause an unwanted situation.

Warning: Keep the IMEI and SIM in confidential, or your privacy

may expose.

Notes

Tabla de contenidos

Otros manuales de Sistema de seguridad de ADT

ADT

ADT SECURITY MANAGER 2000 Manual de usuario

ADT

ADT DSC Impassa Manual de usuario

ADT

ADT Fall Detection Pendant Manual de usuario

ADT

ADT ADT7AIO Series Manual de instrucciones

ADT

ADT L5000 Lynx Manual de uso y cuidado

ADT

ADT Security System D7412 Manual de usuario

ADT

ADT SAFEWATCH EZ Manual de usuario

ADT

ADT Ademco Vista 20P/PSIA Manual de usuario

ADT

ADT DSC Impassa Manual de usuario

ADT

ADT Safewatch QuickConnect Plus Instrucciones de funcionamiento

ADT

ADT Safewatch Manual de usuario

ADT

ADT Safewatch Quick Connect Plus Manual de usuario

ADT

ADT Safewatch Pro 3000 Instrucciones de funcionamiento

ADT

ADT PowerSeries SCW9045-433 Manual de usuario

ADT

ADT ADT7AIO Series Manual de instrucciones

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Manual de usuario

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Manual de usuario

ADT

ADT Commercial Fire & Burglary Alarm System FOCUS 200... Instrucciones de montaje

ADT

ADT Safewatch Plus Entrepreneur Manual de usuario

ADT

ADT BHS-3000C Manual de usuario

ADT

ADT FOCUS CADET Manual de usuario

ADT

ADT Galaxy 8 Manual de usuario

ADT

ADT Health Fall Detection Pendant Manual de usuario

ADT

ADT SAFEWATCH PRO Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario