ADLINK Technology ROScube Pico BSP Manual de usuario

ADLINK Technology Inc. Condential.

2021-03-18

ROScube Pico BSP

Quick Start Guide

Document Generated Date : 2021-03-18

Document Released for: copyright

More information are available at ADLINK Technology Inc. Advanced Robotic Platform Group

ADLINK Technology Inc. Condential.

2021-03-18

Preface

protected by copyright. All rights are reserved. No part of this manual may be reproduced by

any mechanical, electronic, or other means in any form without prior written permission of

the manufacturer.

Disclaimer

The information in this document is subject to change without prior notice in order to

improve reliability, design, and function and does not represent a commitment on the part of

the manufacturer. In no event will the manufacturer be liable for direct, indirect, special,

incidental, or consequential damages arising out of the use or inability to use the product or

documentation, even if advised of the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulll its social responsibility to global environmental preservation

through compliance with the European Union's Restriction of Hazardous Substances (RoHS)

directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental

protection is a top priority for ADLINK. We have enforced measures to ensure that our

products, manufacturing processes, components, and raw materials have as little impact on

the environment as possible. When products are at their end of life, our customers are

encouraged to dispose of them in accordance with the product disposal and/or recovery

programs prescribed by their nation or company.

Trademarks

Product names mentioned herein are used for identication purposes only and may be trade-

marks and/or registered trademarks of their respective companies.

ADLINK Technology Inc. Condential.

2021-03-18

TABLE OF CONTENTS

1 Revisions 1

1.1 BSP MFI Image Naming Rule ............................... 1

1.1.1 Model Name ................................... 1

1.1.2 FileSystem Type .................................. 1

1.1.3 L4T Version .................................... 2

1.1.4 Kernel Version .................................. 2

1.2 Release Note ....................................... 2

1.2.1 v1.0.0 ........................................ 2

1.2.2 v1.0.1 ........................................ 2

1.2.3 v1.0.2 ........................................ 2

1.2.4 v1.0.3 ........................................ 3

1.2.5 v1.0.4 ........................................ 3

1.2.6 v1.0.5 ........................................ 3

1.2.7 v1.0.6 ........................................ 3

1.2.8 L4T-32.4.3-Kernel-v1.0.7 ............................. 3

1.2.9 L4T-32.4.4-Kernel-v1.0.7 ............................. 4

2 Flashing ROScube Pico image 5

2.1 Prerequisite ........................................ 5

2.2 Board Level ROScube Pico Flashing Image ....................... 5

2.2.1 1. Set ROScube Pico into recovery mode ................... 5

2.2.2 2. Connect Host PC and ROScube Pico with micro usb cable. ........ 10

2.2.3 3. Prepare released image on Host PC .................... 11

2.3 System Level ROScube Pico Flashing Image ...................... 12

2.3.1 1. Set ROScube Pico into recovery mode ................... 12

2.3.2 2. Connect Host PC and ROScube Pico with micro usb cable. ........ 15

2.3.3 3. Prepare released image on Host PC .................... 16

2.4 Massive Flashing ...................................... 17

3 ROScube-Pico BSP Quick Start 18

3.1 Default User and Password ............................... 18

3.2 Check BSP Version .................................... 18

3.3 Hardware Monitor .................................... 18

4 Driver Package Usage 21

4.1 Customize System FileSystem .............................. 21

ADLINK Technology Inc. Condential.

2021-03-18

4.1.1 Prepare Filesystem ................................ 21

4.1.2 Modify Filesystem under Chroot ........................ 22

4.2 Flash System Image to Target Machine ......................... 23

4.3 Prepare a Bootable Disk ................................. 23

4.4 Boot from the Bootable Disk .............................. 24

5 Nvidia Jetson Software Stack 25

5.1 Version Table ....................................... 25

5.2 JetPack SDK Installation ................................. 25

5.3 JetPack SDK Example Usage ............................... 26

5.3.1 YOLO Object Detection ............................. 26

5.4 DeepStream SDK Installation .............................. 27

5.5 DeepStream SDK Example Usage ............................ 27

5.5.1 DeepStream Sample App ............................ 27

ADLINK Technology Inc. Condential.

2021-03-18

CHAPTER

ONE

REVISIONS

Document version: l4t-32.4.4-kernel-1.0.7

Compatible with ROScube Pico BSP version:

• L4T-32.4.3-Kernel-1.0.7

• L4T-32.4.4-Kernel-1.0.7

Author Revision

Chester Tseng L4T-32.4.3-Kernel-1.0.7

Chester Tseng L4T-32.4.4-Kernel-1.0.7

1.1 BSP MFI Image Naming Rule

ROScube-Pico BSP MFI le follows the nameing rule.

mfi_<model name>_<filesystem and distro type>_<L4T version>-Kernel-<kernel version>.

tbz2

For example: mfi_npn2_nvidia-ubuntu-rootfs-bionic_L4T-32-4-4-Kernel-1-0-7.tbz2.

1.1.1 Model Name

•npn1 - ROScube Pico with Nvidia Nano module.

•npn2 - ROScube Pico with Nvidia NX module.

1.1.2 FileSystem Type

•nvidia-sample-rootfs - Nvidia provided sample lesystem. It is based on Ubuntu 18.04

•custom-slim-rootfs-bionic - Custom rootfs build from Ubuntu base image 18.04.5. This

le type is much smaller.

•custom-slim-rootfs-focal - Custom rootfs build from Ubuntu base image 20.04.1. This

le type is much smaller.

ADLINK Technology Inc. Condential.

2021-03-18

ROScube Pico BSP, version Release l4t-32.4.4-kernel-1.0.7

1.1.3 L4T Version

The L4T version, for example 32.4.3 or 32.3.4

1.1.4 Kernel Version

ROScube-Pico BSP version, which is aect by kernel and device tree from ADLINK’s internal

engineering development.

1.2 Release Note

Version is based on BSP version (e.g: 1.0.x)

1.2.1 v1.0.0

• NPN2 (ROScube Pico NX)

–Bring up ROScube Pico Pinmux, generial I/Os.

–Add FAN and GPIO TachoMeter driver and device tree.

–Add CanBus device tree.

–Add Tegra GPIO device tree.

–Set up Tegra internal ethernet device tree.

–Set up USB lanes device tree settings.

1.2.2 v1.0.1

• NPN2 (ROScube Pico NX)

–Add board SD card device tree.

–Set up pinmux AUX to I2C on HDMI port.

–Add SX1509 PinCtrl Driver and device tree on 40 pin external header.

–Add USB OTG device tree and enable USB Gadget Linux Driver.

1.2.3 v1.0.2

• NPN2 (ROScube Pico NX)

–Fix LAN7800 LAN chip driver interrupt.

–Use Ubuntu Base as base image.

–Add extra LXDE desktop environment from Ubuntu base image.

ADLINK Technology Inc. Condential.

2021-03-18

ROScube Pico BSP, version Release l4t-32.4.4-kernel-1.0.7

1.2.4 v1.0.3

• NPN2 (ROScube Pico NX)

–Add ethtools, i2c-tools and pci-utils to custom slim rootfs.

–Lock kernel version, to provent from upgrading to Nvidia’ kernel.

1.2.5 v1.0.4

• NPN2 (ROScube Pico NX)

–Bring up audio subsystem.

1.2.6 v1.0.5

• NPN2 (ROscube Pico NX)

–Fix SPI channel number.

1.2.7 v1.0.6

• NPN1 (ROScube Pico Nano)

–First release ROScube Pico Nano

• NPN2 (ROScube Pico NX)

–Add OTA server for future use.

1.2.8 L4T-32.4.3-Kernel-v1.0.7

• NPN1 (ROScube Pico Nano)

–Drive all external GPIO and PWM pins to 0.

–Enable audio subsystem.

–Enable SD card. Set SD card detection pin into pull up when boot up.

–Add OTA server for future use.

–Add Intel AC9260 install script in BSP.

• NPN2 (ROScube Pico NX)

–Apply thermal table from thermal team suggested.

–Add alsa sound setting (Audio out + MIC in)

–Cong SD card detect pin default state to pull up.

–Drive all GPIO to 0 when boot up.

–Load mttcan kernel module when boot up.

–Add Intel AC9260 install script in BSP.

ADLINK Technology Inc. Condential.

2021-03-18

ROScube Pico BSP, version Release l4t-32.4.4-kernel-1.0.7

1.2.9 L4T-32.4.4-Kernel-v1.0.7

• NPN1 (ROScube Pico Nano)

–Upgrade to Nvidia L4T 32.4.4

• NPN2 (ROScube Pico AGX NX)

–Upgrade to Nvidia L4T 32.4.4

ADLINK Technology Inc. Condential.

2021-03-18

CHAPTER

TWO

FLASHING ROSCUBE PICO IMAGE

ROScube Pico provides 2 skus, which are

1. Board level ROScube Pico (Without chassis.)

2. System level ROScube Pico (With chassis.)

2.1 Prerequisite

Before ashing image to ROScube Pico, you should prepare the following items:

•Host PC with Ubuntu 18.04 or 20.04 operating system.

• A good quality micro-usb for connecting to ROScube Pico.

2.2 Board Level ROScube Pico Flashing Image

2.2.1 1. Set ROScube Pico into recovery mode

1. Connect power cable to ROScube Pico.

ADLINK Technology Inc. Condential.

2021-03-18

ROScube Pico BSP, version Release l4t-32.4.4-kernel-1.0.7

2. Power on ROScube Pico. (Press power button)

Tabla de contenidos

Otros manuales de Hardware de computadora de ADLINK Technology

ADLINK Technology

ADLINK Technology NuDAQ PCI-9111DG Manual de usuario

ADLINK Technology

ADLINK Technology NuDAQ ACL-8216 Manual de usuario

ADLINK Technology

ADLINK Technology Express-KL2 Manual de usuario

ADLINK Technology

ADLINK Technology AMSTX-CF Series Manual de usuario

ADLINK Technology

ADLINK Technology CSA-7210 Manual de usuario

ADLINK Technology

ADLINK Technology cPCI-A3525 Series Manual de usuario

ADLINK Technology

ADLINK Technology aTCA-9300 Manual de usuario

ADLINK Technology

ADLINK Technology VPX3020 Series Manual de usuario

ADLINK Technology

ADLINK Technology AMC-7000 Manual de usuario

ADLINK Technology

ADLINK Technology cPCI-3510 Manual de usuario

ADLINK Technology

ADLINK Technology NuPRO-E72 Manual de usuario

ADLINK Technology

ADLINK Technology HDV62 Manual de usuario

ADLINK Technology

ADLINK Technology aTCA-80302PA Manual de usuario

ADLINK Technology

ADLINK Technology PCI-3488 Manual de usuario

ADLINK Technology

ADLINK Technology intel COM Express Express-TL Manual de usuario

ADLINK Technology

ADLINK Technology ETX-EV133 Manual de usuario

ADLINK Technology

ADLINK Technology aTCA-80606PA Manual de usuario

ADLINK Technology

ADLINK Technology PCI-8136 Manual de usuario

ADLINK Technology

ADLINK Technology VPX3000 Series Manual de usuario

ADLINK Technology

ADLINK Technology arm AMPERE COM-HPC-ALT Manual de usuario

ADLINK Technology

ADLINK Technology ETX-BT Manual de usuario

ADLINK Technology

ADLINK Technology Q7-BT Manual de uso y cuidado

ADLINK Technology

ADLINK Technology cPCI-8586 Manual de usuario

ADLINK Technology

ADLINK Technology DLAP-301 Series Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario