ADC LoopStar 780 Manual de usuario

www.adc.com • +1-952-938-8080 • 1-800-366-3891

Spec Sheet

LoopStar®780

Flexible Multi-service Solution for Packet-based Cell Site Backhaul

There is major shift taking place in the mobile backhaul space. Voice and data traffic are increasing

exponentially across cellular networks with a corresponding increase in the number of cell towers

and the transport networks. Providers are seeking ways to reduce network and transport costs by

supporting a strategy designed to move away from a TDM-based transport network towards a

packet network. To this end, more fiber is being pulled to cell tower locations and more Ethernet

services are being added to mobile networks. ADC’s LoopStar® 780 is ideally suited to address

the challenges of wireless carriers in this transition. Deployed at the cell tower, the cost efficient

LoopStar 780 can be used to provide standards-based circuit emulation services that allow TDM

trunks to be backhauled over an Ethernet-based network, while simultaneously supporting IP

Multimedia services to cellular users. This multi-service capability is the heart of the LoopStar 780.

The LoopStar 780 features and benefits:

• Provide cost-efficient transport of voice and data across a packet-based infrastructure

• Support legacy and next generation voice and data services

• Extend Quality of Service capabilities into the access network

• Integrate with copper, fiber, cable and radio infrastructures

• Incorporate standards-based SAToP pseudowire technology, along with full support for business-

class Ethernet services

• Low cost platform enhances the business case for cell tower installation

• Temperature hardened to adapt to a variety of environments

The LoopStar 780 offers up to eight (8) ports of Structured Agnostic Transport over Packet

Switched Networks (SAToP) for T1/E1 support. IP services are supported by four (4) subscriber-

facing 10/100 Ethernet ports and one 100FX port. The WAN interfaces are flexible, offering

both copper and fiber based backhaul solutions for 100/1000TX copper and 100FX/GigE fiber.

Additionally, the WAN interfaces offer dual uplinks for redundancy.

ADC’s LoopStar 780 was designed from the ground up as a carrier class device. It incorporates

field proven pseudowire technology, along with full support for business-class Ethernet services.

Additionally, as a temperature hardened and Telcordia NEBS Level 3 certified product, the LoopStar

780 is suitable for deployment in a wide range of environments and locations. Other carrier class

features include: redundant hot swappable power supplies, BITS timing input, alarm outputs and

EdgeAware™, a comprehensive suite of Intelligent Management and Control tools designed for

the multi-service edge.

Spec Sheet

Web Site: www.adc.com

From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080

Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.

ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101

Specifications published here are current as of the date of publication of this document. Because we are continuously

improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may

verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.

views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products orfeatures

contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer

Powerful Ethernet Service Management

• EdgeAware intelligent management

• Traffic separation via VLAN switching

• 802.1p prioritization

• 802.1q VLAN tagging/stacking

• Rate limiting / TOS classification

• In-band management

• Layer 2 (RMON) stats

• Hands-free Ethernet cable test

• 802.3ad link aggregation

Circuit Emulation Services

• SAToP T1/E1 TDM Pseudowire

• CESoPSN T1/E1 TDM Pseudowire (future)

• Configurable Jitter Buffer

Management

• Local 10/100 (GUI)

• In-band (Web and SNMP)

• SNMP v1, v2

• HTTPS

• T1/E1 Loopbacks

• Real time clock

• Syslog

Built-in Interfaces

• Eight T1/E1 ports

• Four 10/100 Base-T ports

• (Customer facing)

- Ethernet ports can also be used to cascade to a

second LoopStar 780

• One 100FX (Customer or Network facing)

• Two GigE SFPs (Customer or Network facing)

• Two 100/1000TX (Customer or Network facing)

• BITS Clock Input (CESoPSN only)

• Ethernet local management port

• Telemetry

- Three output relays

- Three input points

Physical

• 1.75” (4.445cm) high x17” (43.18cm) wide x

7.25” (18.45cm) deep

• ETSI compliant, full frontal access

• Wall mount or rack mount

• Dual DC power supplies: -48VDC (-40 to -60VDC)

or 24VDC

• AC power option

• Temperature Hardened -40° to 65° C

• UL 60950, IEC60950

• FCC Part 15 – Class A

• CE Mark

• RoHS Compliant

• NEBS Level 3 Certified

Specifications

Ordering Information

Description Catalog Number

Loopstar 780 with single DC power supply LPS-780-DC L1

Loopstar 780 with dual DC power supply LPS-780-DC L2

Loopstar 780 with single AC power supply LPS-780-AC L1

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de ADC

ADC

ADC H2TU-C-388 HiGain Instrucciones de funcionamiento originales

ADC

ADC Micro BS Plus UltraWAVE Manual de usuario

ADC

ADC H4TU-C-319 List 1 Line Unit Manual de usuario

ADC

ADC HRM-238 L1 Manual de usuario

ADC

ADC PG-FlexPlus FLL-814 Manual de usuario

ADC

ADC HiGain HLU-432 Manual de usuario

ADC

ADC H2TU-C-388 HiGain Manual de usuario

ADC

ADC H2TU-C-388 HiGain Instrucciones de funcionamiento originales

ADC

ADC FlexWave WMX 300 Manual de usuario

ADC

ADC ProPatch Miniature Series Manual de usuario

ADC

ADC H2TU-C-388 HiGain Manual de usuario

ADC

ADC HiGain H2TU-C-231 Instrucciones de funcionamiento originales

ADC

ADC HiGain H2TU-C-319 List 4E Instrucciones de funcionamiento originales

ADC

ADC HiGain HDSL2 Manual de usuario

ADC

ADC PG-FlexPlus PG-CAB001 Manual de usuario

ADC

ADC HIGAIN H2TU-R-402 LIST 7G Instrucciones de funcionamiento originales

ADC

ADC H2TU-C-202 Instrucciones de funcionamiento originales

ADC

ADC FlexWave MMX 7000 Manual de usuario

ADC

ADC HiGain HMS-317 List 2 Manual de usuario

ADC

ADC HiGain HRE-420 Manual de usuario

ADC

ADC HiGain HXU-358 Manual de usuario

ADC

ADC Carrier-Grade WiMAX Base Station WMX 5000 Manual de usuario

ADC

ADC Digivance NXD Manual

ADC

ADC H2TU-C-388 HiGain Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario

Lanner

Lanner NCA-1525 Manual de usuario