ACTi Q960 Manual de usuario
Q960 Configuration Guide
with RAS
2019/05/28
www.acti.com
CONFIGURATION GUIDE
2
Part one: Access the Camera
1. Open the IP utility tool on the desktop.
2. Find the camera (Q960) you would like to install.
Note: MAC Address will be used in the second part of 1-2,
please record it for easy operation.
3. Open IE browser. (Please be sure to use IE browser.)
4. Enter the Camera IP on your browser, press “Enter” to go to the
Camera login page.
5. Fill in the account / password and click login to log in.
(Default account/ password→ User name: admin, Password: Aa123456)
www.acti.com
CONFIGURATION GUIDE
3
Part two: Settings of Camera
Please refer to the following figure for the People counting setting:
1. Click “Configuration”.
2. Click “People Counting”.
3. Click “Rule”.
4. Make sure “Enable People Counting” has been checked.
5. Adjust “Auto” to “Manual”.
6. Enter the ceiling height (from the floor) and click “Calibration”.
7. Adjust the detection area and the detection line as the picture below.
*Note: The detection lines should be drawn on the same level (There
should be no unevenness on the detection line)
www.acti.com
CONFIGURATION GUIDE
4
8. Click “Save” for the settings.
Click to draw an orange detection line.
Click to change the direction
of entry and exit.
Click to draw a polygon
detection line.
www.acti.com
CONFIGURATION GUIDE
5
A. Please refer to the following steps for data upload settings.
1. Click “Data Uploading”, check “ON” for Real-Time Upload Data
2. IP should be set the same as the MGB Server.
3. Please set URL as “/PeopleCountingApi/Q960Receiver”
4. Set the Port ” 9005”
5. Click “Save” to save the settings
6. Click “Advanced”
7. Click “Enter/Leave” for Flow Overlay
www.acti.com
CONFIGURATION GUIDE
6
8. Click “Save”.
B. Please refer below to modify the camera IP address
1. Click “Configuration”
2. Click “Network”
3. Click “Basic Settings”
4. Click “TCP/IP”
5. Uncheck “DHCP” to undo dynamic IP address setting
6. This is the IP address to configure
7. Subnet mask
8. Router address
9. Click “Save” to save the settings
www.acti.com
CONFIGURATION GUIDE
7
10. When the settings are done, restart to apply all the settings. Click OK
to restart.
www.acti.com
CONFIGURATION GUIDE
8
Part three: Set up related parameters for the webpage
1. Open the webpage (Using Google chrome browser)
http://localhost/MAS_RetailPackage/Setting/mgbmanagement.aspx
2. Sign in RAS (admin/123456)
3. Add new device settings
3-1. Click “Overview” “Setting” “MGB Server”
3-2. Click the same name as the one attached to the server. (Ex: MGB
Server)
3-3. Click “Add new device” as the picture below
www.acti.com
CONFIGURATION GUIDE
9
3-4 Choose “Q960A” for the Device Type (Please refer to the picture
below)
www.acti.com
CONFIGURATION GUIDE
10
3-5 Configure the details of the device
Camera name:
(Store name +960+location)
MAC Address:
Fill in the default Camera
MAC, please refer to step 2
of the first part.
Note: The minus sign (-) of
the MAC address must be
replaced with a colon (:)
Stream URL: Please
keep it blank.
Camera IP:Enter the IP of
Q960.
HTTP PORT Maintain the
number “80”
Account:admin
Password:Aa123456
3-6 Click “ Save”
3-7 Be sure all the devices
have been set properly,
then click “Lock”.
Click “Lock”→ Press “Save”
（If there are still other devices that need to be added (except Q960),
please click “Lock” after all the devices have been set without error.）
Note: The saved settings cannot be changed after clicking “Lock”！
（If there’s any setting error and need to adjust, please contact ACTi
customer service to unlock.）
Otros manuales para Q960
2
Otros manuales de Cámara de seguridad de ACTi
ACTi
ACTi KCM-3311 Manual de usuario
ACTi
ACTi Outdoor Zoom Dome Series Manual de usuario
ACTi
ACTi I99 Manual de usuario
ACTi
ACTi ACM-4200 series Manual de usuario
ACTi
ACTi KCM-8211 Manual de usuario
ACTi
ACTi VER. 061030 CAM-6500 Instrucciones de uso
ACTi
ACTi KCM-7311 Instrucciones de uso
ACTi
ACTi Q11 Manual de usuario
ACTi
ACTi ACM-7411 Series Instrucciones de uso
ACTi
ACTi E83 Manual de usuario
ACTi
ACTi D52 Instrucciones de uso
ACTi
ACTi B61 Manual de usuario
ACTi
ACTi A950 Manual de usuario
ACTi
ACTi D11 Manual de usuario
ACTi
ACTi TCM-1231 Series Instrucciones de uso
ACTi
ACTi Z94 Manual de usuario
ACTi
ACTi ACM-3511 Manual de usuario
ACTi
ACTi CAM-6600 Series Manual de usuario
ACTi
ACTi Z81 Manual de usuario
ACTi
ACTi ACM-7411 Series Manual de usuario
