ACS ACR1251T Manual de usuario

Subject to change without prior notice [email protected]

www.acs.com.hk

ACR1251T User Manual V1.00

User Manual

ACR1251T

ACR1251T User Manual [email protected]

Version 1.00 www.acs.com.hk

Page 2 of 12

www.acs.com

.hk

Table of Contents

1.0. INTRODUCTION ....................................................................................................................................3

2.0. FEATURES .............................................................................................................................................4

3.0. ARCHITECTURE .....................................................................................................................................5

4.0. ACR1251T OPERATING PROCEDURE .....................................................................................................7

4.1. DRIVER INSTALLATION PROCEDURE ................................................................................................................ 7

4.2. OPERATION EXAMPLE ................................................................................................................................ 10

ACR1251T User Manual [email protected]

Version 1.00 www.acs.com.hk

Page 3 of 12

www.acs.com

.hk

1.0. Introduction

The ACR1251T is a reader (IFD and PCD) reader which supports contactless (PICC) smart cards.

ACR1251T User Manual [email protected]

Version 1.00 www.acs.com.hk

Page 4 of 12

www.acs.com

.hk

2.0. Features

ISO 14443 Parts 1-4 Compliant for Contactless Smart Card Interface.

ISO 18092 Compliant for Contactless Smart Card Interface.

An external antenna for PICC contactless access applications.

Supports the following Tag Types:

oMIFARE Classic. E.g. MIFARE 1K, 4K, MINI and Ultralight.

oISO14443-4 Type A and B.

oISO18092 FeliCa, NFC tag

T=CL emulation for MIFare 1K/4K PICCs

High Speed (424 kbps) Communication for PICCs

Energy saving modes for turning off the antenna field whenever the PICC is inactive,

or no PICC is found. It prevents the PICC from exposing to the field all the time.

User-Controllable Peripherals. E.g. LED.

PCSC Compliant for Contact and Contactless Interfaces.

USB V2.0 Interface. (12M bps)

Device Firmware Upgradeable through the USB Interface.

ACR1251T User Manual [email protected]

Version 1.00 www.acs.com.hk

Page 5 of 12

www.acs.com

.hk

3.0. Architecture

AT90SCR is for main processor for communication with PC, and control the contactless chip and

peripherals. PN512 acts as a contactless chip to perform the communication between contactless

tags and AT90SCR.

For communication architecture, the protocol between ACR1251T and PC is using CCID protocol. All

the communication between PICC is PCSC Compliant.

ACR1251T

Antenna

AT90SCR200H Host

Controller

LEDs

PN512

NFC

Interface

chip

Operation

System

PICC

Contactless

Tag

Contactless Interface

Carrier Frequency = 13.56MHz

ACR1251T User Manual [email protected]

Version 1.00 www.acs.com.hk

Page 6 of 12

www.acs.com

.hk

PCSC Layer

ISO 14443 Parts 1-4

/ ISO 18092

PICC Interface

PICC

(Built-in Antenna)

USB

Interface

(CCID)

Physical

Interface

ACR1251T

ACR1251T PCSC

PICC Interface

T=CL & T=1

Emulation

ACR1251T User Manual [email protected]

Version 1.00 www.acs.com.hk

Page 7 of 12

www.acs.com

.hk

4.0.ACR1251T Operating Procedure

4.1. Driver installation Procedure

Hardware requires:

ACR1251T

PC with OS window XP or above

Software requires:

Driver installer “ACS_Unified_PCSC_Driver_Installer_bin-4.0.6.0-20141114_all.zip”

Steps:

1. Extract the file “ACS_Unified_PCSC_Driver_Installer_bin-4.0.6.0-20141114_all.zip”

2. Execute “Setup.exe”

3. Below screen will be shown

Select the language, then Click “OK”

ACR1251T User Manual [email protected]

Version 1.00 www.acs.com.hk

Page 8 of 12

www.acs.com

.hk

4. Below screen will be shown, “Next” to continue

5. Below screen will be shown, configure the installation path, then “Next” to continue

ACR1251T User Manual [email protected]

Version 1.00 www.acs.com.hk

Page 9 of 12

www.acs.com

.hk

6. Below screen will be shown, “Install” to continue

7. Waiting until below screen shown

Click “Finish”

8. Driver Installation Complete

ACR1251T User Manual [email protected]

Version 1.00 www.acs.com.hk

Page 10 of 12

www.acs.com

.hk

4.2. Operation Example

Hardware requires:

ACR1251T

PC with OS window XP or above

Test card x 1 (provided by ACS)

Software requires:

APDU.exe (for example)

Steps:

1. Plug in the reader into the PC

2. Place the Test Card on the top of the reader about 5cm

3. Open “APDU.exe”

4. Click “1. Select reader”, Chose “ACS ACR1251 CL Reader PICC 0”, then click “OK”

5. Select “T1”, “Stress”, Message = “FF CA 00 00 00”, Interval = “500”

Tabla de contenidos

Otros manuales de Lector de tarjetas de ACS

Manuales populares de Lector de tarjetas de otras marcas

Lindy

Lindy 43185 Manual de usuario

Lindy

Lindy 43185 Manual de usuario

ViziT

ViziT RD-4F Manual de usuario

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manual de usuario

AVID ID

AVID ID AVID1043 Manual de usuario

Conrad

Conrad PCMCIA Manual de usuario

Rosslare

Rosslare DR-6255 Manual de usuario

Lindy

Lindy 51541 Manual de usuario

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manual de usuario

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manual de usuario

Secukey

Secukey S2-MF Manual de usuario

Elecom

Elecom MR-SMC07 series Manual de usuario

Alien

Alien ALR-9800 Manual de usuario

Datamars

Datamars R-IN1300 MID Manual de usuario

Alarm Lock

Alarm Lock AL-PRE2 Manual de usuario

xpr

xpr B100PROX-AH Guía del usuario

SimpleTech

SimpleTech FlashLink Manual de usuario

Rolls

Rolls HR74 Manual de usuario