Acrosser Technology ACM-XD15B7 Manual de usuario

ACM-XD15B7

User Manual

Acrosser Technology Co., Ltd.

www.acrosser.com

ACM-XD15B7

COM Express 3.0 Basic Size Type 7

with Intel

Xeon

D SoC

ACM-XD15B7

2Acrosser Technology Co., Ltd.

Disclaimer

For the purpose of improving reliability, design and function, the information in

this document is subject to change without prior notice and does not represent a

commitment on the part of Acrosser Technology Co., Ltd.

In no event will Acrosser Technology Co., Ltd. be liable for direct, indirect, special,

incidental, or consequential damages arising out of the use or inability to use the

product or documentation, even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All rights are

reserved. No part of this manual may be reproduced by any mechanical, electronic,

or other means in any form without prior written permission of Acrosser Technology

Co., Ltd.

Trademarks

The product names appear in this manual are for identication purpose only. The

trademarks and product names or brand names appear in this manual are the

property of their respective owners.

Purpose

This document is intended to provide the information about the features and use of

the product.

Audience

The intended audiences are technical personnel, not for general audiences.

To read this User Manual on your smart phone, you will have to install an

APP that can read PDF le format rst. Please nd the APP you prefer from

the APP Market.

Ver: 100-001

Date: Dec. 30, 2019

ACM-XD15B7

www.acrosser.com

Table of Contents

1. Introduction ...................................................................5

1.1. Specications ............................................................................................................. 6

1.2. Packing List ................................................................................................................ 7

1.3. Block Diagram ............................................................................................................ 8

2. Hardware Information ...................................................9

2.1. Mainboard Layout....................................................................................................... 9

2.2. Connector Pin Denition........................................................................................... 10

2.2.1. CN1, CN2 Pin Assignments .......................................................................... 10

2.3. Board Dimension...................................................................................................... 14

3. BIOS Settings...............................................................15

3.1. Main Setup ............................................................................................................... 15

3.2. Advanced Setup ....................................................................................................... 16

3.2.1. Serial Port Console Redirection .................................................................... 17

3.3. Chipset Setup........................................................................................................... 18

3.3.1. PCH SATA Conguration............................................................................... 18

3.4. Boot Setup................................................................................................................ 19

3.5. Security Setup .......................................................................................................... 19

3.6. Save & Exit Setup..................................................................................................... 20

4. Software Installation and Programming Guide...........21

4.1. Introduction............................................................................................................... 21

4.1.1. Environment .................................................................................................. 21

4.1.2. GPIO and Watchdog ..................................................................................... 21

4.2. API List and Descriptions ......................................................................................... 21

4.2.1. General ......................................................................................................... 21

4.2.2. GPIO ............................................................................................................. 22

4.2.3. Watchdog ...................................................................................................... 22

5. FAQ ...............................................................................24

Q 1. Where can I nd the serial number of this product?................................................. 24

ACM-XD15B7

4Acrosser Technology Co., Ltd.

This page intentionally left blank.

ACM-XD15B7

www.acrosser.com

1. Introduction

COM Express Concept

COM Express is an open industry standard dened specically for COMs (Computer-

on-Modules). Its creation provides the ability to transfer from legacy interfaces to the

newest technologies available today.

COM Express modules are available in three form factors:

• COM Express Extended Module: 155mm x 110mm

• COM Express Basic Module: 125mm x 95mm

• COM Express Compact Module: 95mm x 95mm

Type 7 COM Express Basic Module

Type 7 COM Express Basic Module (Enhanced Version)

An Added Surge Protection Circuit

An Added CPLD Control Circuit

Pulled Up the 3.3V, 5V & 12V’s Capacitance value for Enhancing

Endurance

The ACM-XD15B7 utilizes the Type 7 COM Express Basic Module that fully

complies with the PICMG (PCI Industrial Computer Manufacturers Group), COM.0

R3.0 specication and offers extra ordinarily high bandwidth for high-speed data

transmission through two high-performance 220-pin connectors.

The ACM-XD15B7 supports Intel Xeon D SoC(Broadwell-DE) processor. The basic

I/O ports support VGA, 4 x USB 2.0, 4 x USB 3.0, COM, 2 x 10GbE LAN, and GPIO

with optional carrier board ADB-XD15MB.

Type Connector

Rows

PCI Express

Lanes

PEG PCI IDE

SATA

LAN Video Serial Other Features Note

1AB (Single) 6 No No No 4 1 LVDS A & B, VGA Legacy

2AB & CD

(Double) 22 Yes Yes 141LVDS A & B, VGA, PEG/

SDVO Legacy

3AB & CD

(Double) 22 Yes Yes No 4 3 LVDS A & B, VGA, PEG/

SDVO Legacy

4AB & CD

(Double) 32 Yes No 1 4 1 LVDS A & B, VGA, PEG/

SDVO Legacy

5AB & CD

(Double) 32 Yes No No 4 3 LVDS A & B, VGA, PEG/

SDVO Legacy

6AB & CD

(Double) 24 Yes No No 4 1 LVDS A & B, VGA, 3 x

DDI

2 TX/RX serial pairs with

option to overlay CAN

interface on 1 port

USB 3.0

7AB & CD

(Double) 32

Yes,

for 16

lans

Yes 2 None

2 TX/RX serial pairs with

option to overlay CAN

interface on 1 port

USB 3.0, 4 x 10Gb

Ethernet

Added in

Rev 3.0

10 AB (Single) 4 No No No 2 1 LVDS A only (AB

(Single) channel), DDI

2 Serial COM, 1 optional

CAN USB 3.0

ACM-XD15B7

6Acrosser Technology Co., Ltd.

1.1. Specifications

CPU • Intel® Xeon® D Processor (Industrial grade)

• Xeon® D1548 2.0/2.6GHz 12MB Cache, 45W (8 core)

Chipset • Integrated in SoC processor

BIOS • Software Protection function

• PEG: Enable / Disable(Default)

• PXE Booting: Enable(Default) / Disable

• DMI Link active state power management (ASPM):

Enable / Disable (Default)

Memory • 2x 2400 DDR4 SODIMM (Support ECC function)

• Memory up to 32GB (Dual channel)

• Default conguration: 8GB+8GB (Micron IC Used)

10 GbE Ethernet • 2x 10GBASE KR (10 GbE with KR interface & NC-SI)

• Support PXE Boot function

GbE Ethernet • 1x GbE & (Intel I210IT)

• PCI-e Lane7used by GbE LAN

• Support PXE Boot function

NC-SI • NC-SI supported on AB connector

SATA • 2x SATA III (Port 0/1)

USB • 4x USB2.0 (Port 0/1/2/3)

• 4x USB3.0 (Port 0/1/2/3)

Serial Port • 2x RS-232 (Only TX & RX)

GPIO • 4-bit GPI and 4-bit GPO

PCI-e/PCI Busses

Support

• 24x PCI Express 3.0 lanes

• 1x PCI-e x16 (PCI-e lanes 16~31, reserved 2x PCI-e

x8 by bios setting)

• 1x PCI-e x8 (PCI-e lanes 8~15)

• 8x PCI Express 2.0 lanes

• 6x PCI-e x1: AB connector, PCI-e Lanes 0~5)

• 1x PCI-e x1: CD connector, PCI-e Lanes 6)

OS Support • Linux Kernel 4.9

Heat sink • Aluminum material heat-sink with fan(Default)

• CPU Heat spreader(Optional item)

Watchdog Timer • Software programmable 0~255 seconds, 0 = disable

timer.

Power Mode • AT Mode (Auto power on after power input)

ACM-XD15B7

www.acrosser.com

CMOS Battery • Without CMOS Battery.

Dimension • 125 x 95mm (4.92” x 3.74”) COM Express Basic Size

Safety • CE, FCC class A, ASTM D4169 Level 3, REACH

1.2. Packing List

Check if the following items are included in the package.

Item Q’ty

�ACM-XD15B7 1

�Quick Guide 1

�CD Disk 1

ACM-XD15B7

8Acrosser Technology Co., Ltd.

1.3. Block Diagram

ACM-XD15B7

www.acrosser.com

2. Hardware Information

2.1. Mainboard Layout

Top View

DIMM1

DIMM2

CPU

CPLD

CPUFAN1

Bottom View

CN1

CN2

SPI_ROM

ACM-XD15B7

10 Acrosser Technology Co., Ltd.

2.2. Connector Pin Definition

CPU Intel Xeon D Processor (Industrial grade)

Xeon® D1548 2.0/2.6GHz 12MB Cache, 45W (8 core )

FCBGA1667 37.5x37.5mm

DIMM1/DIMM2 CN_DIMM_1&2 DDR4 SO-DIMM 260P

CPUFAN1 3-pin Fan Connector

Pin # Signal

1 GND

2+12V

3 FAN Speed Sensor

Header: 3-pin. Pitch: 2.54mm.

CPLD CPLD Power Manager

CN1 COM-Express 220Pin male H3.25mm Pitch:0.5mm TYPE 7 C&D

CN2 COM-Express 220Pin male H3.25mm Pitch:0.5mm TYPE 7 A&B

SPI_ROM For BIOS Firmware SPI_128Mb

2.2.1. CN1, CN2 Pin Assignments

This module is connected to the carrier board via two 220-pin connectors for a total

of 440 pins connectivity. These connectors are broken down into four rows. The CN2

connector consists of rows A and B, while the CN1 connector consists of rows C and

Pin # CN2 – Row A CN2 – Row B CN1 – Row C CN1 – Row D

1GND (FIXED) GND (FIXED) GND (FIXED) GND (FIXED)

2GBE0_MDI3- GBE0_ACT# GND (FIXED) GND (FIXED)

3GBE0_MDI3+ LPC_FRAME# USB_SSRX0- USB_SSTX0-

4GBE0_LINK100# LPC_AD0 USB_SSRX0+ USB_SSTX0+

5GBE0_LINK1000# LPC_AD1 GND (FIXED) GND (FIXED)

6GBE0_MDI2- LPC_AD2 USB_SSRX1- USB_SSTX1-

7GBE0_MDI2+ LPC_AD3 USB_SSRX1+ USB_SSTX1+

8No Connect LPC_DRQ0# GND (FIXED) GND (FIXED)

9GBE0_MDI1- LPC_DRQ1# USB_SSRX2- USB_SSTX2-

Tabla de contenidos

Otros manuales de Hardware de computadora de Acrosser Technology

Acrosser Technology

Acrosser Technology AR-B1653 Manual de usuario

Acrosser Technology

Acrosser Technology AR-B1479 Manual de usuario

Acrosser Technology

Acrosser Technology AR-B1797 Manual de usuario

Acrosser Technology

Acrosser Technology AR-M9919 Series Manual de usuario

Acrosser Technology

Acrosser Technology AR-B1662 Manual de usuario

Acrosser Technology

Acrosser Technology AR-B1380 Manual de usuario

Acrosser Technology

Acrosser Technology AND-DNV3Ax Manual de usuario

Acrosser Technology

Acrosser Technology ACM-XE21B6 Manual de usuario

Acrosser Technology

Acrosser Technology AND-DNV3N3 Series Manual de usuario

Acrosser Technology

Acrosser Technology AR-B1550 Manual de usuario

Acrosser Technology

Acrosser Technology AR-B1660 Manual de usuario

Acrosser Technology

Acrosser Technology AR-B1651 Manual de usuario

Acrosser Technology

Acrosser Technology AR-B1652 Manual de usuario

Acrosser Technology

Acrosser Technology AMB-VDX3H2 Manual de usuario

Acrosser Technology

Acrosser Technology AR-B2001 Manual de usuario

Acrosser Technology

Acrosser Technology AR-B5890 Manual de usuario

Acrosser Technology

Acrosser Technology AMB-VDX3H1 Series Manual de usuario

Acrosser Technology

Acrosser Technology AR-B1622 Guía de instalación

Acrosser Technology

Acrosser Technology AR-B1551NP Manual de usuario

Acrosser Technology

Acrosser Technology AR-B2104 Manual de usuario

Acrosser Technology

Acrosser Technology AR-B1520 Manual de usuario

Acrosser Technology

Acrosser Technology AR-ES5495 Manual de usuario

Acrosser Technology

Acrosser Technology 386SX Manual de usuario

Acrosser Technology

Acrosser Technology 486DX2 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario