ABB ACS580-0P Manual de usuario
User’s Manual
ACS580-0P 3R Irrigation Packaged Drive
Supplement to ACS580-U1 User’s Manual
2 ACS580-0P 3R Irrigation Packaged Drive
ACS580 Drive Manuals
GENERAL MANUALS
ACS580-01 User’s Manual (1…200 HP)
• Safety
• Installation
• Start-Up
• Embedded Fieldbus
• Fieldbus Adapter
• Diagnostics
• Maintenance
• Technical Data
ACS580 Technical Reference Manual
(available in electronic format only)
• Detailed Product Description
• Practical Engineering Guides
© 2020 ABB Inc. All Rights Reserved.
ACS580-0P 3R Irrigation Packaged Drive 3
Table of Contents
Table of Contents
Safety
Use of Warnings and Notes..............................................4
Installation
Application .......................................................................5
Input Disconnect Features and Functions ........................5
Installation Flow Chart......................................................7
Preparing for Installation ..................................................8
Preparing for Installation ..................................................9
Installing the Drive............................................................10
Mounting optional foot kit on 3R irrigation panel ...............13
Installing the Wiring .........................................................16
Typical Control Schematic................................................19
Application Guides
Ratings.............................................................................22
Input Power Connections and Terminals ..........................23
Dimensions and Weights..................................................24
Ambient Conditions..........................................................25
Applicable Standards
Maintenance Intervals......................................................27
Drive Module Fan Replacement.......................................27
4 ACS580-0P 3R Irrigation Packaged Drive
Safety
Safety
WARNING! The ACS580 adjustable speed AC drive with Input Disconnect
should ONLY be installed by a qualied electrician.
WARNING! Even when the motor is stopped, dangerous voltage is present at
the Power Circuit terminals U1, V1, W1 and U2, V2, W2 and, depending on the
frame size, UDC+ and UDC-, or BRK+ and BRK-.
WARNING! Dangerous voltage is present when input power is connected. After
disconnecting the supply, wait at least 5 minutes (to let the intermediate circuit
capacitors discharge) before removing the cover.
WARNING! Even when power is removed from the input terminals of the
ACS580, there may be dangerous voltage (from external sources) on the
terminals of the relay outputs.
WARNING! When the control terminals of two or more drive units are
connected in parallel, the auxiliary voltage for these control connections must
be taken from a single source which can either be one of the units or an
external supply.
WARNING! The ACS580 will start up automatically after an input voltage
interruption if the external run command is on.
WARNING! When the ACS580 with Input Disconnect is connected to the line
power, the Motor Terminals T1, T2, and T3 are live even if the motor is not
running. Do not make any connections when the ACS580 with Input Disconnect
is connected to the line. Disconnect and lock out power to the drive before
servicing the drive. Failure to disconnect power may cause serious injury or
death.
Note! For more technical information, contact the factory or your local ABB sales
representative.
Use of Warnings and Notes
There are two types of safety instructions throughout this manual:
• Notes draw attention to a particular condition or fact, or give information on a
subject.
• Warnings caution you about conditions which can result in serious injury or death
and/or damage to the equipment. They also tell you how to avoid the danger. The
warning symbols are used as follows:
Dangerous voltage warning warns of high voltage which can cause physical injury
and/or damage to the equipment.
General warning warns about conditions, other than those caused by electricity,
which can result in physical injury and/or damage to the equipment.
ACS580-0P 3R Irrigation Packaged Drive 5
Installation
Installation
Study these installation instructions carefully before proceeding. Failure to observe the
warnings and instructions may cause a malfunction or personal hazard.
WARNING! Before you begin read “Safety” on page 1.
WARNING! When the ACS580 with Input Disconnect is connected to the line
power, the Motor Terminals T1, T2, and T3 are live even if the motor is not
running. Do not make any connections when the ACS580 with Input Disconnect
is connected to the line. Disconnect and lock out power to the drive before
servicing the drive. Failure to disconnect power may cause serious injury or
death.
Application
This manual contains supplemental information that is unique to ACS580 input
disconnect congurations (0P). Refer to the base manual, ACS580-01 User’s Manual, for
all other information.
Input Disconnect Features and Functions
The ACS580 with Input Disconnect is an ACS580 AC adjustable frequency drive
packaged with an input disconnect switch and with a door mounted, external operating
handle. The operating handle can be padlocked in the OFF position (padlock not
supplied). Enclosure are UL Type 3R (NEMA 3R).
The following is a typical power diagram.
ACS580
Drive with Input Disconnect
Motor
3 Phase
Drive 3
3
Disconnect Switch
or Circuit Breaker
Input Power
6 ACS580-0P 3R Irrigation Packaged Drive
Installation
The following gures show the front view of the ACS580 Drive with Input Disconnect
standard congurations, and identify the major components.
UL Type / NEMA 3R Enclosures
Operating
Handle for
Disconnect
Switch
?
OFF
HANDAU
POT
Note! UL Type 3R enclosures are designed to be mounted on a wall. See section
“Prepare the UL Type 3R ACS580 for UNISTRUT®mounting” for more details.
ACS580-0P 3R Irrigation Packaged Drive 7
Installation
Installation Flow Chart
The installation of Input Disconnect congurations for ACS580 drives follows the outline
below. The steps must be carried out in the order shown. At the right of each step are
references to the detailed information needed for the correct installation of the unit.
Note! References in the middle column below are to the ACS580-01 User’s Manual.
References in the third column below are to this manual.
Task
Refer to the
ACS580-01 User’s
Manual “Installation”
section
Additional Reference in
this Manual
PREPARE for
installation
“Preparing for Installation” • “Drive Identication” on page 9.
• “Suitable Mounting Location” on
page 10.
PREPARE the
Mounting Location
“Prepare the Mounting Location” • “Dimensions and Weights”
MOUNT the drive “Mount the Drive” --
INSTALL wiring “Wiring Overview” and
“Install the Wiring”
“Installing the Wiring”
CHECK installation “Check Installation” --
APPLY power “Apply Power” --
START-UP “Start-Up” --
8 ACS580-0P 3R Irrigation Packaged Drive
Installation
Preparing for Installation (Supplement to ACS580-01 User’s Manual)
Lifting the Drive
ACS580-0P 3R Irrigation Packaged Drive 9
Installation
Preparing for Installation (Supplement to ACS580-01 User’s Manual)
Drive Identication
To identify the type of device you are installing, refer to the type code number on the
device identication label.
• Wall mounting base drives – label attached on the side surface of the heat sink.
• Packaged drive – label attached to outside surface on the left side of the
enclosure.
• Enclosure with hinged cover/door – label on inside surface of the cover/door.
Type Code Number
Use the following to interpret the type code found on the identication label.
ACS580-0P-124A-4 +C192
AC Drive = 580 Product Series
Construction
0P = Drive with disconnect switch
Output current rating (See ratings chart for details)
Voltage rating
2 = 208/230 VAC
4 = 460 VAC
Enclosure protection class
+C192 = 3R Irrigation Drive
Ratings and Frame Size
Charts in the “Ratings” sections of the ACS580-01 User’s Manual and this manual list
technical specications, and identify the drive’s frame size.
Note! Some instructions in this document vary, depending on the drive’s frame size.
To read the Ratings table, you need the “Output current rating” entry from the type
code (see above).
Suitable Mounting Location
For selecting a suitable mounting location for congurations, refer to:
• Preparing for installation in the ACS580-01 User’s Manual, and
• The Technical Data section of this manual for information on dimensions, weights
and free space requirements.
10 ACS580-0P 3R Irrigation Packaged Drive
Installation
Installing the Drive (Supplement to ACS580-01 User’s Manual)
WARNING!
Metal shavings or debris in the enclosure can damage electrical equipment and
create a hazardous condition. Where parts, such as conduit plates require
cutting or drilling, rst remove the part. If that is not practical, cover nearby
electrical components to protect them from all shavings or debris.
Do not connect or disconnect input or output power wiring, or control wires,
when power is applied.
Never connect line voltage to drive output Terminals T1, T2 and T3.
Do not make any voltage tolerance tests (Hi Pot or Megger) on any part of the
unit. Disconnect motor wires before taking any measurements in the motor or
motor wires.
Make sure that power factor correction capacitors are not connected between
the drive and the motor.
Prepare the Mounting Location
The ACS580 should only be mounted where all of the requirements dened in “Preparing
for Installation” are met.
Mount the Drive
1. Use a hoist to move the cabinet into position.
Note! If the cabinet location does not provide access to the cabinet sides, be
sure to re-mount side panels before positioning cabinet.
2. Install and tighten mounting bolts.
Otros manuales para ACS580-0P
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Accionamiento de CC de ABB
ABB
ABB ACS1000i air-cooled Manual de usuario
ABB
ABB ACS580-01 drives Manual de usuario
ABB
ABB ACH580-01 Series Manual de instalación
ABB
ABB ACQ810-04 Manual de usuario
ABB
ABB ACS5000 Manual de usuario
ABB
ABB ACS 800 Series Guía del usuario
ABB
ABB DCS880 series Manual de usuario
ABB
ABB ACQ580-01 Series Manual de instalación
ABB
ABB Johnson Controls AYK550-UH Manual de usuario
ABB
ABB ACS355 series Manual de usuario
ABB
ABB ACS480 Manual de usuario
ABB
ABB ACH580-01 Series Manual de usuario
ABB
ABB ACS355 series Manual de usuario
ABB
ABB F-ARI Test Manual de usuario
ABB
ABB ACS510-01 Manual de usuario
ABB
ABB ACH550-01+B055+F278 Manual del propietario
ABB
ABB NETA-21 Manual
ABB
ABB Dodge HSCXT105 Manual de usuario
ABB
ABB ACS880-07LC Manual de usuario
ABB
ABB ACS550-02 Manual de usuario
Manuales populares de Accionamiento de CC de otras marcas
Vincent Associates
Vincent Associates UNIBLITZ ED12DSS Manual de usuario
EKSMA OPTICS
EKSMA OPTICS DQ-100-4 Manual de lista de piezas
Chamberlain Garog
Chamberlain Garog D Series Manual de usuario
Parker
Parker PDS Series Manual de usuario
Festo
Festo DGC G Series Guía de configuración
Binks
Binks QS-5012-1-CE Manual de usuario
