Aaeon UP Vision Plus X Manual de usuario

Last Updated: November 18, 2019

UP Vision Plus X

UPCP-CR-VPX3-A10-001

Maker Board

User’s Manual 1st Ed

Preface II

Maker Board UP Vision Plus X

This document is copyrighted, 2019. All rights are reserved. The original manufacturer

reserves the right to make improvements to the products described in this manual at

any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted in any

form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use, or for

any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to change

without notice. While reasonable efforts have been made in the preparation of this

document to assure its accuracy, AAEON assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information contained herein.

AAEON reserves the right to make changes in the product design without notice to its

users.

Preface III

Maker Board UP Vision Plus X

Acknowledgement

All other products’ name or trademarks are properties of their respective owners.

⚫Microsoft Windows is a registered trademark of Microsoft Corp.

⚫Intel, Pentium, Celeron, and Xeon are registered trademarks of Intel Corporation

⚫Core, Atom are trademarks of Intel Corporation

⚫ITE is a trademark of Integrated Technology Express, Inc.

⚫IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines

Corporation.

All other product names or trademarks are properties of their respective owners.

Preface IV

Maker Board UP Vision Plus X

Packing List

Before setting up your product, please make sure the following items have been

shipped:

Item

Quantity

⚫UP Vision Plus X

⚫Adapter Board i

⚫Adapter Board ii

⚫Cooler Heatsink

⚫Standoff

⚫Screw

If any of these items are missing or damaged, please contact your distributor or sales

representative immediately.

Preface V

Maker Board UP Vision Plus X

About this Document

This User’s Manual contains all the essential information, such as detailed descriptions

and explanations on the product’s hardware and software features (if any), its

specifications, dimensions, jumper/connector settings/definitions, and driver installation

instructions (if any), to facilitate users in setting up their product.

Users may refer to the product page on AAEON.com for the latest version of this

document.

Preface VI

Maker Board UP Vision Plus X

Safety Precautions

Please read the following safety instructions carefully. It is advised that you keep this

manual for future references

1. All cautions and warnings on the device should be noted.

2. Make sure the power source matches the power rating of the device.

3. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

4. Always completely disconnect the power before working on the system’s

hardware.

5. No connections should be made when the system is powered as a sudden rush

of power may damage sensitive electronic components.

6. If the device is not to be used for a long time, disconnect it from the power

supply to avoid damage by transient over-voltage.

7. Always disconnect this device from any AC supply before cleaning.

8. While cleaning, use a damp cloth instead of liquid or spray detergents.

9. Make sure the device is installed near a power outlet and is easily accessible.

10. Keep this device away from humidity.

11. Place the device on a solid surface during installation to prevent falls

12. Do not cover the openings on the device to ensure optimal heat dissipation.

13. Watch out for high temperatures when the system is running.

14. Do not touch the heat sink or heat spreader when the system is running

15. Never pour any liquid into the openings. This could cause fire or electric shock.

16. As most electronic components are sensitive to static electrical charge, be sure to

ground yourself to prevent static charge when installing the internal components.

Use a grounding wrist strap and contain all electronic components in any

static-shielded containers.

Preface VII

Maker Board UP Vision Plus X

17. If any of the following situations arises, please the contact our service personnel:

i. Damaged power cord or plug

ii. Liquid intrusion to the device

iii. Exposure to moisture

iv. Device is not working as expected or in a manner as described in

this manual

v. The device is dropped or damaged

vi. Any obvious signs of damage displayed on the device

18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH

TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES

(SEE CHAPTER 1) TO PREVENT DAMAGE.

Preface VIII

Maker Board UP Vision Plus X

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

•Any changes or modifications not expressly approved by the party

responsible for compliance could void the authority to operate equipment.

•This device and its antenna must not be co-located or operating in

conjunction with any other antenna or transmitter.

•End-users and installers must be provided with antenna installation

instructions and transmitter operating conditions for satisfying RF exposure

compliance.

Preface IX

Maker Board UP Vision Plus X

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

This device complies with Part 15 of FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference and (2) this device must

accept any interference received, including interference that may cause undesired

operation.

Preface X

Maker Board UP Vision Plus X

China RoHS Requirements (CN)

产品中有毒有害物质或元素名称及含量

AAEON Main Board/ Daughter Board/ Backplane

部件名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

印刷电路板

及其电子组件

○

外部信号

连接器及线材

○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006 标准规定的限量要求以下。

X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

SJ/T 11363-2006 标准规定的限量要求。

备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。

Tabla de contenidos

Otros manuales de Hardware de computadora de Aaeon

Aaeon

Aaeon PFM-620S Manual de usuario

Aaeon

Aaeon EPIC-8526 Manual de usuario

Aaeon

Aaeon BOXER-8120AI Manual de usuario

Aaeon

Aaeon AIOT-MSSP01 Manual de usuario

Aaeon

Aaeon AQ7-LN Manual de usuario

Aaeon

Aaeon SBC-556/L Manual de usuario

Aaeon

Aaeon PCM-3336 Manual de usuario

Aaeon

Aaeon HSB-440I Manual de usuario

Aaeon

Aaeon SBC-657B Manual de usuario

Aaeon

Aaeon PCM-5335 Manual de usuario

Aaeon

Aaeon SBC-350A Manual de usuario

Aaeon

Aaeon COM-690T Manual de usuario

Aaeon

Aaeon UP Squared 6000 Edge Computing Kit Manual de usuario

Aaeon

Aaeon SBC-656 Manual de usuario

Aaeon

Aaeon SBC-356 Manual de usuario

Aaeon

Aaeon UPN-EHLCB Manual de usuario

Aaeon

Aaeon AEC-6637 Manual de usuario

Aaeon

Aaeon SBC-456 Manual de usuario

Aaeon

Aaeon SBC-400 Manual de usuario

Aaeon

Aaeon NIM-S13D Manual de usuario

Aaeon

Aaeon NanoCOM-WHU Manual de usuario

Aaeon

Aaeon ETX-701 Manual de usuario

Aaeon

Aaeon BOXER-6640M Manual de usuario

Aaeon

Aaeon SBC-775 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario