ZyXEL Communications P-792H Instrucciones de instalación
Prestige 792H
G.SHDSL 4-port Security Gateway
Compact Guide
Version 3.40(BZ.0)
March 2004
Prestige 792H
2
Table of Contents
1 Introducing the Prestige ................................................................................................................. 3
1.1 Certifications............................................................................................................................. 3
2 Hardware......................................................................................................................................... 4
2.1 Rear Panel Connections ............................................................................................................ 4
2.2 The Front Panel LEDs............................................................................................................... 5
3 Setting Up Your Computer’s IP Address...................................................................................... 6
3.1 Windows 95/98/Me................................................................................................................... 7
3.2 Windows 2000/NT/XP.............................................................................................................. 9
3.3 Checking/Updating Your Computer’s IP Address.................................................................. 11
3.4 Testing the Connection to the Prestige.................................................................................... 11
4 Configuring Your Prestige ........................................................................................................... 11
4.1 Accessing Your Prestige Via Web Configurator..................................................................... 12
4.2 Common Screen Command Buttons....................................................................................... 13
4.3 Internet Access Using the Wizard........................................................................................... 13
4.4 Test Your Internet Connection................................................................................................ 19
5 Advanced Configuration .............................................................................................................. 19
5.1 Network Address Translation Overview................................................................................. 19
5.2 Configuring SUA Server......................................................................................................... 19
5.3 Firewall Overview................................................................................................................... 21
5.4 Enabling the Firewall .............................................................................................................. 22
5.5 Procedure for Configuring Firewall Rules .............................................................................. 22
5.6 Configuring Source and Destination Addresses...................................................................... 26
6 Troubleshooting ............................................................................................................................ 27
Prestige 792H
3
1 Introducing the Prestige
The Prestige 792H G.SHDSL 4-port Security Gateway is a cost effective DSL solution designed for
medium sized business networks connecting to the Internet or remote office networks. Key features
of the Prestige include high-speed Internet access, robust firewall security, VPN (Virtual Private
Network) support, auto fail-over and fail-back WAN dial backup solution and effective network
bandwidth management. See your User’s Guide for more details on all Prestige features.
You should have an Internet account already set up and have been given most of the following
information.
INTERNET ACCOUNT INFORMATION
Your device’s WAN IP Address (if given): __________________
DNS Server IP Address (if given): Primary __________________, Secondary _________________
Virtual Path Identifier (VPI): ____________
Virtual Channel Identifier (VCI): ____________
Multiplexing (VC-based or LLC-based): VC LLC
Encapsulation:
Transfer Rate:
Standard Mode: (Select one of the choices below)
RFC 1483
ENET ENCAP Ethernet Encapsulation Gateway IP Address: ____________________
PPPoA User Name: ____________ Password: ____________
PPPoE Service Name: ____________
User Name: ____________ Password: ____________
1.1 Certifications
1. Go to www.zyxel.com
2. Select your product from the drop-down list box on the ZyXEL home page to go to that
product's page.
3. Select the certification you wish to view from this page.
Prestige 792H
4
2 Hardware
2.1 Rear Panel Connections
Figure 1 P792H Hardware Connections
Table 1 Prestige Rear Panel Description
LABEL DESCRIPTION
POWER Connect to a power source using the power adapter for your region (see your User’s
Guide).
RESET You only need to use this button if you’ve forgotten the Prestige’s password. It returns the
Prestige to the factory defaults (password is 1234, LAN IP address 192.168.1.1, see your
User’s Guide for details).
LAN 10/100
Ethernet Ports
Connect computers or hubs to these ports with Ethernet cables. These ports are auto-
negotiating (can connect at 10 or 100Mbps) and auto-crossover (automatically adjust to
straight-through or crossover Ethernet cable.
Prestige 792H
5
Table 1 Prestige Rear Panel Description
LABEL DESCRIPTION
CON/AUX switch
CON/AUX port
Only connect this port if you want to configure the Prestige using the SMT via console port
or set up a backup WAN connection; see your User’s Guide for details.
Set this switch to the “CON” side to use the CON/AUX port as a console port for local
device configuration and management. Connect the Rj-45 of the console cable to the
console port of the Prestige and the 9-pin female end to a serial port (COM1, COM2 or
other COM port) on your computer. Your computer should have a terminal emulation
communications program (such as HyperTerminal) set to VT100 terminal emulation, no
parity, 8 data bits, 1 stop bit, no flow control and 9600 bps port speed.
Set this switch to the “AUX” side to use the CON/AUX port as an auxiliary dial-up WAN
connection. Connect the RJ-45 end of the console cable to the CON/AUX port and use the
9-pin end of the cable to connect to a modem or TA.
DSL Connect to a telephone jack using a telephone wire.
2.2 The Front Panel LEDs
Turn on the Prestige by pressing the ON/OFF button.
The PWR/SYS LED turns on when you connect the power. The PWR and SYS LED blinks while
performing system testing and then stays on if the testing is successful. The PPP/ACT, DSL and
four LAN LEDs turn on if they are properly connected. Refer to the User’s Guide for more detailed
LED descriptions.
Figure 2 P792H Front Panel LED Description
Table 2 P792H Front Panel LED Description
LED COLOR STATUS DESCRIPTION
PWR/SYS Green On The Prestige is receiving power and functioning properly.
Prestige 792H
6
Table 2 P792H Front Panel LED Description
LED COLOR STATUS DESCRIPTION
Blinking The Prestige is rebooting.
Red On Power to the Prestige is too low.
Off The system is not ready or has malfunctioned.
On The Prestige is linked successfully to a DSLAM.Green
Blinking The Prestige is initializing the G.SHDSL line.
DSL
Off The G.SHDSL link is down.
Green Blinking The Prestige is sending/receiving non-PPP data.
On The Prestige has a PPP (PPPoA or PPPoE) connection.Amber
Blinking The Prestige is sending/receiving PPPoA or PPPoE traffic.
PPP/ACT
Off The system is ready, but is not sending/receiving data.
On The Prestige has a successful 10Mb Ethernet connection.Green
Blinking The Prestige is sending/receiving data.
On The Prestige has a successful 100Mb Ethernet connection.Amber
Blinking The Prestige is sending/receiving data.
LAN 1 ~ 4
Off The LAN is not connected.
3 Setting Up Your Computer’s IP
Address
Skip this section if your computer is already set up to accept a dynamic IP
address. This is the default for most new computers.
The Prestige is already set up to assign your computer an IP address. Use this section to set up your
computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254
range with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can
communicate with your Prestige.
Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already be installed
on computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.
Prestige 792H
7
3.1 Windows 95/98/Me
1. Click Start, Settings, Control Panel and double-click the Network icon to open the Network
window.
2. The Network window Configuration tab displays a list of installed components. You need a
network adapter, the TCP/IP protocol and Client for Microsoft Networks.
3. In the Network window Configuration tab,
select your network adapter's TCP/IP entry and
click Properties.
Prestige 792H
8
4. Click the IP Address tab.
-If your IP address is dynamic, select Obtain an IP
address automatically.
-If you have a static IP address, select Specify an IP
address and type your information into the IP
Address and Subnet Mask fields.
5. Click the DNS Configuration tab.
-If you do not know your DNS information, select
Disable DNS.
-If you know your DNS information, select Enable
DNS and type the information in the fields below (you
may not need to fill them all in).
Prestige 792H
9
6. Click the Gateway tab.
-If you do not know your gateway’s IP address,
remove previously installed gateways.
-If you have a gateway IP address, type it in the New
gateway field and click Add.
7. Click OK to save and close the TCP/IP Properties window.
8. Click OK to close the Network window. Insert the Windows CD if prompted.
9. Turn on your Prestige and restart your computer when prompted.
Verifying Your Computer’s IP Address
1. Click Start and then Run.
2. In the Run window, type "winipcfg" and then click OK to open the IP Configuration window.
3. Select your network adapter. You should see your computer's IP address, subnet mask and default
gateway.
3.2 Windows 2000/NT/XP
1. In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.
2. In Windows XP, click Network Connections.
In Windows 2000/NT, click Network and Dial-up Connections.
3. Right-click Local Area Connection and then click Properties.
4. Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.
Prestige 792H
10
5. The Internet Protocol TCP/IP Properties screen opens (the
General tab in Windows XP).
- To have your computer assigned a dynamic IP address, click
Obtain an IP address automatically.
If you know your DNS sever IP address(es), type them in the
Preferred DNS server and/or Alternate DNS server fields.
-To configure a static IP address, click Use the following IP
Address and fill in the IP address (choose one
from192.168.1.2 to 192.168.1.254), Subnet mask
(255.255.255.0), and Default gateway (192.168.1.1) fields.
Then enter your DNS server IP address(es) in the Preferred
DNS server and/or Alternate DNS server fields.
If you have more than two DNS servers, click Advanced, the
DNS tab and then configure them using Add.
6. Click Advanced. Remove any previously installed gateways in
the IP Settings tab and click OK to go back to the Internet
Protocol TCP/IP Properties screen.
7. Click OK to close the Internet Protocol (TCP/IP) Properties
window.
8. Click OK to close the Local Area Connection Properties
window.
Otros manuales para P-792H
4
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Puerta de ZyXEL Communications
ZyXEL Communications
ZyXEL Communications P-660HN-F1 Manual de usuario
ZyXEL Communications
ZyXEL Communications VWG1312-B10A Manual de usuario
ZyXEL Communications
ZyXEL Communications VSG1435-B101 - V1.10 Manual de usuario
ZyXEL Communications
ZyXEL Communications P-660HNU-Tx Manual de usuario
ZyXEL Communications
ZyXEL Communications PK5001Z Manual de usuario
ZyXEL Communications
ZyXEL Communications VMG4380-B10A Manual de usuario
ZyXEL Communications
ZyXEL Communications ZyAIR G-4100 Manual de usuario
ZyXEL Communications
ZyXEL Communications P-660H-D Series Manual de usuario
ZyXEL Communications
ZyXEL Communications P-870H Series Manual de usuario
ZyXEL Communications
ZyXEL Communications VSG-1200 V2 Guía de referencia
ZyXEL Communications
ZyXEL Communications P-660HN-51 - Manual de usuario
ZyXEL Communications
ZyXEL Communications VMG1312-T20A Manual de usuario
ZyXEL Communications
ZyXEL Communications P-660HW-Tx v3 Series Manual de usuario
ZyXEL Communications
ZyXEL Communications ZyWALL USG 100 Series Manual
ZyXEL Communications
ZyXEL Communications P-660HWP-D1 Manual de usuario
ZyXEL Communications
ZyXEL Communications P-660HWP-Dx Manual
ZyXEL Communications
ZyXEL Communications Internet Security Gateway ZyWALL 100 Manual de usuario
ZyXEL Communications
ZyXEL Communications P-870HN-51B - V1.0 Manual de usuario
ZyXEL Communications
ZyXEL Communications N VDSL2 Manual de usuario
ZyXEL Communications
ZyXEL Communications ISG50-ISDN Instrucciones de instalación y funcionamiento
Manuales populares de Puerta de otras marcas
LST
LST M500RFE-AS Manual de usuario
Kinnex
Kinnex Media Gateway Manual de usuario
2N Telekomunikace
2N Telekomunikace 2N StarGate Manual de usuario
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario
Telsey
Telsey CPVA 500 - SIP Manual de usuario
RTA
RTA 460A-NNA4 Hoja de especificaciones
