ZyXEL Communications P-660HW-T - V2 Manual de usuario

P-660HW-T v2

802.11g Wireless ADSL 2+ 4-port Gateway

Quick Start Guide

Version 3.40

6/2006

Edition 1

P-660HW-T v2 Quick Start Guide

Overview

The P-660HW-T v2 is an ADSL router with a four-port built-in Ethernet switch and IEEE 802.11b/g wireless

capability. The P-660HW-T v2 allows wired and wireless clients to safely access the Internet.

See your User’s Guide for background information on all features.

How to use the included CD

This CD provides multi-media animations that help you set up your P-660HW-T v2.

1On the included CD, click Multimedia Auto Provisioner > Installation Tutorial.

2At the end of the tutorial, click Configuration Genie.

1 Hardware Connections

If you prefer to see a multi-media animation of how to make hardware connections, see the installation tutorial

on the included CD.

1DSL: Use a telephone wire to connect your P-660HW-T v2’s DSL port to a telephone jack (or to a splitter, if

one is already installed).

P-660HW-T v2 Quick Start Guide

2ETHERNET: Use an Ethernet cable to connect a computer to an ETHERNET port for initial configuration

and/or Internet access.

3POWER: Use the power adaptor provided with your P-660HW-T v2 to connect an appropriate power

source to the POWER socket. Make sure the power source is on.

4Push in the POWER button. Look at the lights on the front panel.

•ThePOWER light blinks while your P-660HW-T v2 starts up and stays on once it is ready. The DSL light is on

when the P-660HW-T v2 has a DSL connection, and the WLAN light is on when the wireless LAN is ready. The

INTERNET light is on when you are able to access the Internet and blinks when the P-660HW-T v2 is sending

or receiving data.

• Each ETHERNET light stays on if the corresponding ETHERNET port is properly connected and blinks when

there is traffic.

If any of these lights are not on, check your connections, and inspect your cables for damage. If the lights are

still off, contact your local vendor.

2 Status Page

1In your browser, go to http://192.168.1.1.

2Enter the default password user to go

directly to the Status screen.

If your browser cannot find this screen,

check its security settings. See

Troubleshooting for details.

P-660HW-T v2 Quick Start Guide

3See the User’s Guide for field descriptions of the Status screen.

3 Internet and Wireless Setup

1Open your web browser, and go to http://www.zyxel.com.

Your P-660HW-T v2 tries to detect your Internet connection. Wait for the P-660HW-T v2 to finish detection. If

any other screens appear, follow the directions in the screen.

If the web page opens correctly, your P-660HW-T v2 is ready for you to use. If the web page does not open,

follow the rest of the steps. You should have the information provided by your ISP.

2In your browser, go to http://192.168.1.1.

3Enter the admin password 1234 to set up your internet and wireless connections and security settings.

Click Login. If your browser cannot find the login screen, check its security settings. See Troubleshooting for

details.

P-660HW-T v2 Quick Start Guide

4Follow the directions in the screens.

5Click Go to Wizard setup. Then, click Apply.

6Click INTERNET/WIRELESS SETUP. Wait while your P-660HW-T v2 tries to detect your DSL connection.

7Follow the directions in the wizard. Do not change default settings if your ISP did not provide information.

OTIST

ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically configure the

SSID and WPA-PSK on all OTIST-equipped wireless clients within range of the P-660HW-T v2.

Note: If you enable OTIST but select Disable wireless security using the wireless wizard, the P-

660HW-T v2 will create a WPA-PSK automatically.

P-660HW-T v2 Quick Start Guide

Enable OTIST only if your wireless clients support WPA and OTIST.

You must enable OTIST on the P-660HW-T v2 and all wireless clients (in any order) within three minutes.

To enable OTIST on the P-660HW-T v2, you can either use the wizard (see Section 3 on page 4) or hold in the

RESET button (see Section 1 on page 2) for three to eight seconds. Do not hold the RESET button in for too

long, as this will reset the P-660HW-T v2 to the factory defaults.

To enable OTIST on wireless clients, click Start in the Adapter screen. The Setup Key is 01234567 by default.

If you have previously saved a setup key on the P-660HW-T v2, use it instead of the default.

For more information, see Wireless LAN in the User's Guide.

Troubleshooting

1If you cannot access the web configurator using Internet Explorer in Windows XP or Windows Server 2003,

make sure you allow pop-up windows, JavaScripts and Java permissions or set the Internet security level

lower than High in Internet Explorer (in Internet Explorer, click Tools > Internet Options > Security >

Custom Level...). See the appendix in the User’s Guide for more information.

2If you cannot access the Internet when your computer is connected to the ETHERNET port, follow these

steps.

A) Check the lights on the front panel. If they are different from what is described in section 1, make sure

the P-660HW-T v2 is correctly connected. (See section 1.) If the lights are still different, turn off the

device, wait a few seconds, and turn it on again.

B) Follow the steps in section 3again. Make sure you enter the correct information. For example, if your

account has a user name and password, make sure you type it correctly. In addition, if you are not sure

which encapsulation your ISP uses, contact your ISP.

C) If you are using a new Internet account, contact your ISP to make sure it is active.

D) If you still have problems, see Troubleshooting in the User’s Guide.

3If you cannot access the Internet using the wireless network, follow these steps.

A) On a computer in the wireless network, open your browser, and go to http://192.168.1.1. If you see the

screen in step 3of section 3, follow suggestions A- Dabove. If you do not, go to the next step.

B) Make sure your P-660HW-T v2 and your computer are using the same wireless and wireless security

settings. Follow the steps in section 3.

Viewing Your Product’s Certifications

1Go to www.zyxel.com.

2Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3Select the certification you wish to view from this page.

Otros manuales para P-660HW-T - V2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Puerta de ZyXEL Communications

ZyXEL Communications

ZyXEL Communications PRESTIGE 324 Manual de usuario

ZyXEL Communications

ZyXEL Communications SBG5500 Series Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyXEL Prestige 304 Manual de usuario

ZyXEL Communications

ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H Manual de usuario

ZyXEL Communications

ZyXEL Communications LTE6100 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-660H Series Manual de usuario

ZyXEL Communications

ZyXEL Communications LTE6101 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-660H-T1 v3s Manual de usuario

ZyXEL Communications

ZyXEL Communications P-661HW-D Series Manual de usuario

ZyXEL Communications

ZyXEL Communications PRESTIGE 2302RL - Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyWALL USG 100 Series Manual de usuario

ZyXEL Communications

ZyXEL Communications P-2301R/RL-P1C Manual

ZyXEL Communications

ZyXEL Communications P-793H 601156 Manual de usuario

ZyXEL Communications

ZyXEL Communications HLA3105 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyWALL USG100-Plus Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 5 Manual de usuario

ZyXEL Communications

ZyXEL Communications ADSL 2+ Security Gateway Instrucciones de instalación

ZyXEL Communications

ZyXEL Communications 2R-P1C Manual de usuario

ZyXEL Communications

ZyXEL Communications P-660HN-Fx series Manual de usuario

ZyXEL Communications

ZyXEL Communications P-660H Series Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 2WE Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 2WE Instrucciones de instalación

ZyXEL Communications

ZyXEL Communications P-873HNU-51B Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyWALL USG 20/20W Series Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario

RTA

RTA 460MCBC-N2E Hoja de especificaciones