ZyXEL Communications P-660HN-Fx series Manual de usuario

www.zyxel.com

QUICK START GUIDE

P-660HN Fx Series

802.11n Wireless

ADSL2+ 4-port Gateway

Firmware v3.70

Edition 2, 12/2008

DEFAULT LOGIN DETAILS

IP Address: http://192.168.1.1

User Password: user

Admin Password 1234

ENGLISH

P-660HN-Fx Series

Introduction

The P-660HN-Fx series are high performance routers which combine high-

speed ADSL Internet access, a built-in switch, a firewall and high-speed

wireless networking capability.

How It Works

A computer can connect to the P-660HN-Fx using an Ethernet cable (a) or

using wireless connection (b). The P-660HN-Fx then connects to the Internet

(c), providing you with seamless access to the Internet.

Overview

• Hardware Connections, on page 5

• Internet/Wireless Setup, on page 8

ENGLISH

Before You Begin

Make sure you have the following things before you set up your P-660HN-Fx.

• Internet access - account information provided by your ISP, such as user

name and password.

• Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with

JavaScript enabled.

See the User’s Guide for all configuration details. To read the User’s Guide,

insert the CD that came in the box into your CD-ROM drive. A screen should

pop up. Navigate to the User’s Guide from this screen. If a screen does not

pop up, open Windows Explorer (click My Computer), click on the CD-ROM

drive (usually drive D) and navigate to it from there.

ENGLISH

P-660HN-Fx Series

Hardware Connections

1. DSL: Use a telephone wire to connect this port to a telephone jack.

2. ETHERNET 1-4: Use an Ethernet cable to connect a computer to this port

for initial configuration and/or Internet access.

3. POWER: Use the power adaptor provided with your P-660HN-Fx to

connect an appropriate power source to this socket.

ENGLISH

4. Push the power switch to the on position.

 Make sure to remove the plastic sheet on the top panel.

Look at the LEDs (lights) on the top panel of the P-660HN-Fx.

• The POWER light blinks during start-up and is green once the P-660HN-

Fx is ready.

• Each ETHERNET light turns on if the corresponding ETHERNET port is

properly connected. The lights blink when the P-660HN-Fx is sending or

receiving data through the corresponding ETHERNET port.

• The WLAN/WPS light turns on when the wireless LAN is ready. It blinks

when the P-660HN-Fx is sending/receiving data through the wireless

LAN.

• The DSL light stays on if a physical DSL connection exists and blinks

when the P-660HN-Fx is initializing the DSL line.

• The INTERNET light stays on when Internet access is available and

blinks when there is data transmitted.

Launch your web browser and navigate to any web site (for example,

www.zyxel.com). The P-660HN-Fx automatically detects and configures your

Internet connection. This may take about two minutes.

ENGLISH

P-660HN-Fx Series

If you have a PPPoE or PPPoA connection, a screen displays prompting you

to enter your Internet account information. Enter the username, password

and/or system password (1234 by default) exactly as provided. Click Apply.

If the INTERNET light is off but the DSL light is on, go to Internet/Wireless

Setup on page 8and use the wizard to configure your Internet access

settings.

 If none of the LEDs (lights) are on, check your connections. Make

sure that you have the power adaptor connected to the P-660HN-

Fx and plugged in to an appropriate power source. Make sure the

power source is turned on. Turn the P-660HN-Fx off, wait for a few

seconds and turn it back on. If the LEDs are still off, contact your

local vendor.

ENGLISH

Internet/Wireless Setup

1. Open your browser and enter http://192.168.1.1 (the P-660HN-Fx's

default IP address) as the address.

2. Enter the admin password 1234 and click Login.

 If the login screen does not display, make sure you allow web

browser pop-up windows, JavaScripts and Java permissions.

Your computer should be also set to get an IP address

automatically from a DHCP server. See the appendices in your

User’s Guide for more information.

ENGLISH

P-660HN-Fx Series

3. It is strongly recommended that you change the admin password in the

following screen. If you change it, you will not see this screen the next time

you log in.

4. Click Apply to replace the P-660HN-Fx’s default digital certificate. The

certificate is used for authentication when using a secure HTTPS

connection over the Internet.

ENGLISH

5. Select Go to Wizard setup and click Apply.

The connection wizard helps you set up your Internet connection as well as

your wireless settings.

Enter the Internet access information exactly as given to you by your

ISP in each wizard screen and then click Next to continue or click Back

to return to the previous screen.

Current screen information will be lost if you click Back.

Tabla de contenidos

Otros manuales de Puerta de ZyXEL Communications

ZyXEL Communications

ZyXEL Communications ZYWALL 20W - Manual de usuario

ZyXEL Communications

ZyXEL Communications Internet Security Gateway 10~100 Series Manual de usuario

ZyXEL Communications

ZyXEL Communications LTE3301 Series Manual de usuario

ZyXEL Communications

ZyXEL Communications EMG2881-T20A Manual de usuario

ZyXEL Communications

ZyXEL Communications AMG1312-T Series Manual de usuario

ZyXEL Communications

ZyXEL Communications VSG-1200 V2 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-2302R-P1C Guía de referencia

ZyXEL Communications

ZyXEL Communications ZyWALL USG 100 Series Manual de usuario

ZyXEL Communications

ZyXEL Communications P-662H Series Manual de usuario

ZyXEL Communications

ZyXEL Communications p-2302r series Manual de usuario

ZyXEL Communications

ZyXEL Communications VSG-1200 Manual de usuario

ZyXEL Communications

ZyXEL Communications AMG1202-T series Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 30W Manual de usuario

ZyXEL Communications

ZyXEL Communications VMG3312-T20A Manual de usuario

ZyXEL Communications

ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H Manual de usuario

ZyXEL Communications

ZyXEL Communications VSG1435-B101 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyWALL USG 100 Series Manual de usuario

ZyXEL Communications

ZyXEL Communications VSG1432-B101 - V1.10 Manual de usuario

ZyXEL Communications

ZyXEL Communications P-870HW-51A V2 Manual de usuario

ZyXEL Communications

ZyXEL Communications FSG2200HNU Manual de usuario

ZyXEL Communications

ZyXEL Communications P-870H-51a v2 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZyWALL USG100-Plus Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 Manual de usuario

ZyXEL Communications

ZyXEL Communications Unified Security Gateway ZyWALL 300 Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario

RTA

RTA 460MCBC-N2E Hoja de especificaciones