Zumimall G4K Manual de usuario
®
ZUMIMALL
Get Smarter About Your Security
4G LTE Security Camera
QUICK START GUIDE
Brand Story
Founded in 2008, Zumimall focuses on the design and
research of intelligent security technology. Zumimall insists on
taking consumer needs as its core and strives to create smart
home products that lead a global home fashion trend for
consumers. Zumimall believes that craftsmanship creates top
quality and technology changes life. With high-quality products
and first-class service, Zumimall won the love and trust of
millions of customers as soon as it went public. Over the years,
Zumimall has served 45 continents of America, covering 80%
of the population. Zumimall is the provider of a smart lifestyle
and a guardian of the wonderful moments of your life.
Scan "zumimall" QR code to
purchase products
Follow @zumimalloffice on
Facebook
回 @zumimall
囹 @zumimalloffice
回 @zumimallcam
回 @zumimallcamera
What's in the Box?
Camera
Solar Panel
Bracket
SIM Card
Camera
Bracket
Screw Bag
SIM Card
Tweezers
Charging
Cable
Solar Panel
Product
Manual
2
Camera Introduction
Antenna
Built-in PIR Sensor
Spotlight
Lens
Microphone
Reset Key
Power Key
SD Card Clot
Nano SIM Clot
Charging Port
Speaker
Working LED
Charging LED
Power Key
Press and hold the power button for 5 seconds to turn on the
camera
Reset Key
Press and hold RESET for 5 seconds to reset the device (if you
have modified the settings, they will revert to the factory default
settings)
SD Card Slot
Support local SD card storage (up to 128G)
El ___________________________
SIM Card Slot
Support Nona SIM Card
Lens
Support FHD resolution
Power Light
Red means charging is in progress Blue means charging is
complete
Microphone
Capture sound for your videos
PIR Sensor
Can detect moving objects up to 10 meters away
Working
Status Light
Red light continuously on: camera network abnormal
Red light flashing : waiting for network connection
Red and blue lights flash alternately: SIM card recognition failed
Blue light flashing slowly: SIM card recognition is successful
Speaker
Two-way voice call sound output
Charge Port
Use 5V/2A power supply to charge the camera
Thumb Screw
For fixing the camera and the bottom bracket
Antenna
4G dedicated signal antenna
Download and Register APP
l.Download "ZUMIMALL" APP
Search "zun "in App Store or Google Play, or scan the QR code
below to download and install it on your smartphone.
2.APP Permission Settings
When using the application for the first time, please turn on the
following 2 permissions.
Allow ■ ZUMIMALL" to access mobile cellular data and WLAN, otherwise you
will not be able to add devices.
Allow" ZUMIMALL" to receive messages, otherwise the phone will not receive
alert push notifications when motion detection or audible alerts are triggered.
* The following is a screenshot of IOS cell phone operation, Android cell phone
permissions open method is basically the same as this method.
3.Register Account
New users must register by email, the concrete steps are as follows:
• Click on "Register";
• Follow the steps to complete your account registration;
• Login.
5 ______________________________________________________
Tip： O Please use the correct e-maiL
Q Please select the correct country code.
❸ When registering for a new account, please select the region where
you are actually located.
(Cameras cannot be shared between different registration regions.)
Choice SIM card
l.A SIM card is included in the camera box, and
this card supports the major carrier networks in
your country.
Note:
It has the advantages of easy installation and use, fast and convenient
data recharge, strong network compatibility, strong 4G signal, strong
compatibility with the camera, no need to sign an agreement with the
operator, etc. It is recommended for you to use it.
________This SIM card is only compatible with this camera, please do not insert
it into a smartphone or other electronic products.
2.lf you need to configure a SIM card of a local
operator, please refer to the following list to
choose:
Contraries
Recommended Carriers
3/4G Frequency Bands Supported
by the Camera
United States
Verizon/AT&T/T-Mobile
LTE-FDD： B2/B4/B5/B!2/B13/B14/B66/B71
WCDMA： B2/B4/B5
Unites Kingdom
O2/Vodafone/EE/Three
LTE-FDD：Bl/B3/B5/B7/B8/B20/B28
LTE-TDD： B38/B40
WCDMA:B1/B5/B8
Germany
Telekom/Vodafone/Telef6nica
France
Orange/ Bouygue/ SFR/Free
Other Countries
of Europe
Choose from local mainstream
operators
6
Note:
• The camera does not guarantee the compatibility of the SIM cards of carriers
other than those listed in the above list, please choose carefully. The camera
only uses data traffic and will not use services such as calls/texts.
• Some cards have a PIN code that you can disable first with your smartphone.
Do not insert an IOT or M2M SIM card into your smartphone.
• Cameras purchased in this country cannot be used in other countries because
of different 4G frequency bands. Cameras purchased in Europe are supported
by the countries marked on the SIM card manual.
Insert the SIM Card
The SIM card slot is located in the
rubber cover under the camera lens,
please remove the rubber cover first.
When choosing a Nona SIM card to insert
it into the SIM card slot, please
remember: the side with the gold contacts
is facing up, and you need to push the
trimmed notch into the SIM card slot and
press it all the way in.
If it is difficult to operate, please use the SIM card tweezers in the camera box.
Note:
________Do not insert the SIM card into the card slot backwards.
It will cause the SIM card not to be recognized, and the SIM card will
be stuck inside and cannot be pulled out.
7 ____________________________________________________________
Power On the Camera
After inserting the SIM card, press and hold the power button of
the camera for 3 seconds until the working indicator on the side of
the lens lights up in red, then let go.
Wait for about 30 seconds until the working indicator turns blue light
flashing, you will hear the voice prompt "Waiting to connect", which
means the camera has successfully connected to the 4G network,
and the next step is to add the camera in the APP.
Add the Camera On the Phone
Stepl: Move the camera and smartphone to a location with a good mobile
network signal, and make sure there are no signal interferes around.
Step2: Run the" ZUMIMALL" application, click Q and select "4G Camera".
Step3: Follow the prompts to ensure that that the camera has been inserted
into the SIM card and turned on (the indicator light turns blue and flashes).
Step4: Aim the QR code of the mobile phone directly at the camera lens.
Keep ◦ distance of 15-25 cm(5-8 inch) and do not move. After hearing the "Bugu"
sound from the camera until the QR code is successfully recognized,
click the "Hear the sound" button .
8
Step5: After you click "Hear the sound", the camera will start connecting to
smartphone. Once the connection is complete, the app will jump to the "Device
Found!" page where you can edit the camera name, and then click "Done".
Please read the installation instructions of the camera carefully.
When installing the camera later, it can help you avoid some wrong operations.
Add failed?
Please refer to the following to resolve the
issues:
Camera voice
prompt
Working
light
status
Camera status
Solutions
Wait for connection
timeout
Indicator light
off
If the network is not
configured for a long time,
the device will
automatically sleep
Press the power button to restart
SIM card not found
The red and
blue lights
flash
alternately
and then turn
off
The camera does not
recognize this SIM card
1. Check whether the SIM card is
inserted in the correct direction
2. Check whether the SIM card is not
fully inserted, and reinsert it
9 ______________________________________________________
Tabla de contenidos
Otros manuales de Cámara digital de Zumimall
