Zumimall F5 Manual de usuario
Get Smarter About Your Security
QUICK START GUIDE
F5BATTERY POWERED CAMERA
Warranty Service
Thanks for your shopping and trust.
We are keeping to optimize products and improve our lifetime
customer service to offer you a better shopping experience. If you
have any problems, please feel free to send us an E-mail. We will
solve your problems within 24 hours. Besides, your advice or
suggestions will be much appreciated and welcomed.
Register via the link below to get 3 Years Warranty Extension.
http://bit.ly/zuReg
Product Service
Distributor: [email protected]
More About Us
Web: www.zumimall.com
Facebook: www.facebook.com/zumimalloffice
Amazon Store: www.amazon.com/zumimall
1. What’s in the Box -----------------------------------------------------P1
2. Product Diagram -----------------------------------------------------P2
3. Download & Install App ---------------------------------------------P3
4. Connect Camera to App --------------------------------------------P4
5. Camera Installation --------------------------------------------------P5
6. Monitoring Area ------------------------------------------------------P5
7. Device Menu ----------------------------------------------------------P6
8. PIR Body Detection ---------------------------------------------------P7
8.1 Body Detection Alarm Setting ----------------------------------P7
8.2 Alarm Notifications ----------------------------------------------P7
9. Power Saving Settings ------------------------------------------------P8
9.1 Alarm Interval & Shooting Interval ------------------------------P8
9.2 Maximum Shooting Time & Recording Time ------------------P8
9.3 Alarm Plan --------------------------------------------------------P9
10. Battery Management -----------------------------------------------P9
11. Multi-User Sharing -------------------------------------------------P10
12. Reset Camera ------------------------------------------------------P11
INDEX PAGE
1. What’s in the Box
ZUMIMALL Battery Camera*1 Outdoor Metal Mount*1
Quick User Guide*1 Screws Set*1
USB Cable*1
1
NOTE:Micro SD card and power adapter are not included.
2
2. Product Diagram
Camera Lens
PIR Sensor
LED Indicator
IR Lamp
Microphone
Speaker
SD Card Slot
USB Port
Reset Hole
Power Button
1
2
3
47
8
10
11
5
6
1
2
3
6
911
4
5
Power Button
Reset Button
Blink Slowly in Red
Blink Fast in Red
Solid in Red
Solid in Blue
Blink Slowly in Blue
Keep pressing for 5-10 seconds to power on/power off
Keep pressing for 5-10 seconds to reset
Awaiting Wi-Fi connection, ready for adding devices
Wi-Fi connecting
Network problem
Wi-Fi connected, camera running normally
Firmware update
7
8
10
9Charging Status
3
3. Download & Install App
Download ZUMIMALL App from Google Play™ or App Store™.
Or scan the QR codes as below, with your smartphone.
NOTE: Google Play™ is a trademark of Google Inc.
App Store™ is a service mark of Apple Inc.
ZUMIMALL AndroidiOS
NOTE: Please turn on both of the following permissions.
① Allow ZUMIMALL App to access mobile cellular data and wireless
LAN, otherwise, it will fail to connect the camera.
② Allow ZUMIMALL App to receive pushed messages, otherwise, the
smartphone will not receive alarms when motion is detected.
>
>
<
Notifications
ZUMIMALL
ALERTS
Allow Notifications
9:41
Lock Screen
Banner Style
Sounds
Badges
OPTIONS
When Unlocked(Default)
Show Previews
Temporary
>
>
Automatic
Notification Grouping
>
NotificationCenter Banners
5:51
<
ZUMIMALL
Wireless Data
ALLOW”WIRELESS DATA”TO USE DATA
Off
WLAN
WLAN & Cellular Data
5:51
4
4. Connect Camera to App
5:48
Devices
Devices Messages
Tap + to add a new device.
Me
5:48
Camera
Select Device
Get Smarter about your Smart Security
Battery Camera
Doorbell
5:49
Add Battery Camera
Press the [battery camera] button to wake the
device if it is asleep.
Hold the device power button to start the
device.
<
4
Please stay near to your router for the best
signal.
Next
Hold the RESET button on your device for 4-5
seconds(please refer to the usea manual for
more on this).
Wait for a flashing RED indicator light.
Tap Next
5:49
Add Battery Camera
Please reset the device.
<
Next
5:50
Wi-Fi Setup
Select your Wi-Fi network
(Please select a 2.4G network, this device will
not work with 5G Wi-Fi networks)
Junan
cam2019@
Change WiFi
Hide Password
<
Next
Please remove all film from the lens.Tap
Next to show a QR code, and let your
device scan the code. Keep your phone 5-8
inches from the lens.
5:50
Operation Instructions
<
Next
—— — — — — — — — — — — — — — —
15~25cm
5~5 in
5:50
Scan QR Code
<
Scan the QR code below with the
device at a distance of 5-8 inches.
A tone will be heard when
successfully scanned.
Help Nctificati...ne heard.
5:50
Connect Network
<
Please place the camera & phone
close to your router for the best
signal.
Device Found!
Connecting the device to the network...
Registering device...
12%
connecting...
5
5. Camera Installation
① Fix the bracket to where you want to install the camera with the
supplied screw.
② Fasten the camera on the metal mount, and fix them.
③ Adjust the viewing angle of the camera.
6. Monitoring Area
① It is not suggested to install the camera vertically towards the
moving objects, otherwise, it may not detect the motion events or
cause delay.
② It is suggested to make the angle between PIR Sensor and
detected objects more than10 degrees.
③ The Camera motion sensor is much more sensitive to side-to-side
movement across its field of view than to movement directly toward
or away from the camera.
6
7. Device Menu
5:51
Devices +
Devices Messages Me
060238708
2020-10-08 14:50:10
12
4
6
7
10
3
5
8
9
5:51
060238708
Bit Rate:10.74KB/s WiFi:97%
2020-10-08 15:30:10
HD
Live
Screenshot
Motion Detection
Intercom Record
History Cloud
<
11 12
13
14
16
20
21
22
2319
18
17
15
5:51
060238708
2020-9-14 15:30:10
Live
Screenshot
Alert
Record
History Cloud
<
Calendar
14:00 15:00 16:00
27
28
26
25
24
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Device List
Add Camera
Real Time
Live View Button
Camera Name
History Playback
Cloud Storage
Messages
My Device List
Personal Homepage
Quit Live Viewing
Setting Manual
Battery Status
HD/SD Switch
Volume On/Off
Full Screen
View Live
Screenshot Button
Body Detection On/Off
Notification History
Cloud Storage
Record to Phone
Two-Way Talk
Zoom
Time Bar
History Screenshot
Alarm Record Album
Date of History Record
Album
7
8. PIR Body Detection
8.1 Body Detection Alarm Setting
8.2 Alarm Notification
Tap on '...'Set it upSelect 'Motion Setting'
5:51
060238708
Bit Rate:10.74KB/s WiFi:97%
2020-10-08 15:30:10
HD
Live
Screenshot
Motion Detection
Record
History Cloud
<
Intercom
PIR 'Motion Detection'defaults to be 'High'level. But it is adjustable.
Please refer to the pictures below.
This camera does not support 7*24 hours all day recording, it is an
event recording camera. It is only triggered when motion is detected.
Here are system’s reactions:
① Alarm notifications with sounds from App.
② Pics/videos automatically stored in Micro SD Card or Cloud.
Sensitivity
Low
High
Detecting Distance (For moving and living objects)
Up to 5 meters (16ft)
Up to 10 meters (32ft)
NOTE:
The higher the sensitivity is, the longer distance the PIR can detect.
Accordingly, the battery will drain faster.
5:51
Settings
<
Receive Alert Notifications
Device Share
>
Device Information
>
Installation Guide
>
Basic Function
>
Power Saving settings
>
Motion Detection
>
Recording management
>
Device Version
Delete the Device
>
Cloud Storage Service
>
Album
5:50
Motion Detection
Medium
After enabling detection, the camera can detect motion
and sound around the canera and can select different
detection sensitivity accouding to different requirements.
Motion Detection
High
Low
<
Day Detection
The Alert will be triggerd only when
human motion is detected.
Night Detection
Alert Plan
Set the time period of the alarm, the device only triggers
an alarm event during this time period.
>
Off
2 minuters
5 minuters
10 minuters
Alarm Interval
Otros manuales para F5
2
Tabla de contenidos
Idiomas:
Otros manuales de Cámara digital de Zumimall
