Zte MF65 Manual de usuario
1
ZTE MF65
Let’s go
Getting Started With Your Device
2
LEGAL INFORMATION
Copyright © 2014 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced,
translated or utilized in any form or by any means, elec-
tronic or mechanical, including photocopying and microlm,
without the prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve
the right to make modifications on print errors or update
specications without prior notice.
Version No.: R1.0
NOTE:
Do not use the device in an enclosed environment or where
heat dissipation is poor. Prolonged work in such space
may cause excessive heat and raise ambient temperature,
which may lead to automatic shutdown of the device for
your safety. In the case of such event, cool the device in a
well-ventilated place before turning on for normal use.
3
Getting to Know Your Device
Appearance
The following gure is for your reference only.
1. LED indicator
2. Power button
3. WPS button
4. Micro USB port
5. microSDHC card slot
6. (U)SIM card slot
NOTE:
The microSDHC™ logo is a trademark of SD-3C,
LLC.
4
Indicators
Indicator Status Description
Network
Red solid
Error status. Not registered to
the mobile network, no (U)SIM
card inserted or no network
service available.
Green solid Registered to the mobile
network.
Green
blinking
Connected to the mobile
network and data is being
transferred.
Wi-Fi
Blue solid Wi-Fi is active.
Blue
blinking WPS is active.
LED light off Wi-Fi is off or your device is in
sleep mode.
5
Battery
Red solid/
blinking
The battery is low. Please
charge the battery.
Green
blinking The battery is being charged.
Green solid The battery level is middle or
high.
LED light off
Your device is in standby mode
and not being charged, or the
battery is not inserted.
Connection Scenario
Your device allows you to use your (U)SIM card to connect
to the Internet and supports multi-clients for surng on the
Internet at the same time. The following gure is only for
your reference.
6
Installing Your Device
1. Slide the back cover and remove it.
2. Install the SIM card.
IMPORTANT:
Your device does not support the Micro/Nano SIM card or
any other nonstandard SIM cards. To avoid damaging the
device, do not use those cards or any card holders.
7
3. Insert the microSDHC card if necessary.
4. Install the battery.
5. Close the back cover.
8
Using Wi-Fi
1. Power on your device.
2. Use the Wi-Fi application on a client to search for avail-
able wireless networks.
NOTE:
Set the client to obtain an IP address automatically. For the
detailed procedure, refer to Conguring Your PC. The client
gets an IP address, for example, 192.168.0.101.
9
3. Select the SSID of your device, and then click Connect.
NOTE:You can nd the default SSID on the label of your
device.
4. Enter the password, and then click Connect.
NOTE: You may need to enter the password for the Wi-Fi
connection. You can view the label on your device to get
the default password.
10
5. Wait until the client is connected to your device suc-
cessfully.
Using a USB Cable
1. Connect a client to your device through a USB cable.
2. Power on your device. The operating system detects
and identies new hardware, and automatically nishes
the installation.
Otros manuales para MF65
7
Tabla de contenidos
Otros manuales de Enrutador inalámbrico de Zte
Zte
Zte MC801A Manual de usuario
Zte
Zte Pocket WiFi 5G A101ZT Manual de usuario
Zte
Zte MF985U Manual de usuario
Zte
Zte MF253M Manual de usuario
Zte
Zte MF65 Manual de usuario
Zte
Zte Verizon 4G Manual de usuario
Zte
Zte MF910 Manual de usuario
Zte
Zte MC7010 Manual de usuario
Zte
Zte MF10 Manual de usuario
Zte
Zte MF286R Manual de usuario
Zte
Zte MF91D Manual de usuario
Zte
Zte MF60 Manual de usuario
Zte
Zte Unite Mobile Hotspot Manual de usuario
Zte
Zte MF93D Manual de usuario
Zte
Zte Z289L Manual de usuario
Zte
Zte MF910 Manual de usuario
Zte
Zte ZXHN H560N Manual de usuario
Zte
Zte MF65 Manual de usuario
Zte
Zte AT&T Velocity MF923 Manual de usuario
Zte
Zte MF269 Manual de usuario
