Zte MF29A Manual de usuario

ZTE MF29A

Wireless Router

User Guide

LEGAL INFORMATION

No part of this publication may be excerpted, reproduced, translated or utilized in

any form or by any means, electronic or mechanical, including photocopying and

microlm, without the prior written permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to make modi-

cations on print errors or update specications without prior notice.

Version No. : R1.0

Edition Time: 2012-11

Manual No.: 079584505291

Getting Started

The router operates on the HSUPA+/HSUPA/HSDPA/WCDMA networks and GSM/

GPRS/EDGE networks and supports voice and data service.

Appearance

Indicators

Indicator State Description

1 WAN signal

strength indi-

cation

On Signal strength is very good or good (RSSI >=

-90dBm)

Blinking Signal strength is weak (-100dBm < RSSI <

-90dBm)

Off No signal

2 Network

mode indica-

tion

Blue Registered to 3G network

Red Registered to 2G network

Off Not Registered

3 WAN con-

nection status

indication

On WAN connection established (PDP activated)

Blinking WAN connection establishing (PDP activating)

Off WAN connection not established (PDP not

activated)

4 Phone sta-

tus indication

Off PSTN not connected

Blinking Calling via PSTN

On PSTN connected

5 Phone sta-

tus indication

Off Local phone hang up

Blinking Phone picked up, ringing or network CS regis-

tering

On In calling

Indicator State Description

6 Wi-Fi

indication

Off WLAN shut down

Blinking WLAN working normally with data transmission

7 Power

indication

On External power supply working normally.

Off External power supply disconnected or pow-

ered off.

Interface Description

1. Phone Standard RJ11 connector for Telephone

2. PSTN Standard RJ11 connector for PSTN

3. WAN/LAN Ethernet connector to Internet

4. LAN1~LAN3 Ethernet connector to computer

5. Reset Reset button

6. POWER

Socket Connector to the external power supply.

7. ON/OFF Turn the router ON or OFF.

8. ANT Connector to external antenna

9. PRESS ANT

This button is only used for external antenna. If you connect the

external antenna, please press it. Otherwise the RSSI signal

of the router will be poor, and your device may not access the

Internet.

Connecting Your Device

Follow the number to connect your device.

NOTE: If you want to use the mobile network to go to Internet, you need to insert

your SIM card rst.

Switching on Your Device

1. Turn the power switch on to get started. Make sure that the phone is on hook

before you power it on.

NOTE: Do not put anything on the top of the router. Do not lay routers to overlap

each other during usage.

2. Wait 1~2 minutes after turning the router on before you use the service. The

3G & POWER indicator should be lit on.

NOTES:

• When the router is turned off, an incoming caller will hear the prompt like “The

number you have dialed is currently unavailable.”

• If the 3G LED is blinking constantly, try to move the router to another location.

The router takes 1~2 minutes to initialize, attach to the network and obtain an

IP address.

Power Supply

For normal operation, connect the router to the external power adapter. In case of

power failure or when there is no available external power supply, the router will not

work.

About (U)SIM Card

Avoid handling the (U)SIM card unnecessarily. Hold the card by the edges to pre-

vent static damage. Keep the (U)SIM card away from electrical and magnetic appli-

ances.

If you cannot get service, make sure that

• You are in an area which has network coverage.

• You are using the correct (U)SIM card.

Internet Access

Conguring Your PC

Follow the following steps and gures for Windows XP to congure the Internet

Protocol for your connection.

NOTES:

• Wireless Network Connection is used for Wi-Fi connection.

• Local Area Connection is used for Network Cable connection.

1. Right-click My Network Places, and then select Properties.

2. Right-click the icon for Connection, and then select Properties.

3. Select Internet Protocol(TCP/IP), and then click Properties.

4. Select these two items, and then click OK to nish the conguration.

Otros manuales para MF29A

Tabla de contenidos

Otros manuales de Enrutador de red de Zte

Zte

Zte MF65 Manual de usuario

Zte

Zte ZXR10 3800-8 Manual de usuario

Zte

Zte MC889 Manual de usuario

Zte

Zte MF80 Manual de usuario

Zte

Zte ZXHN H560N Manual del operador

Zte

Zte ZXR10 1800-2S Guía

Zte

Zte MF286C Manual de usuario

Zte

Zte ZXR10 3800-8 Instrucciones de instalación

Zte

Zte ZXR10 T600 Manual de usuario

Zte

Zte T-Mobile 4G HotSpot Z64 Guía

Zte

Zte MF920 Manual de usuario

Zte

Zte ZXR10 3800-8 Instrucciones de instalación

Zte

Zte MC7010 Manual de usuario

Zte

Zte ZXHN H108L Manual de usuario

Zte

Zte MF29A Manual de usuario

Zte

Zte MF286C Manual de usuario

Zte

Zte WF821 Manual de usuario

Zte

Zte MF65 Manual de usuario

Zte

Zte ZXR10 3800-8 Instrucciones de instalación

Zte

Zte MF286D Manual de usuario

Zte

Zte ZXV10 W300 Manual de usuario

Zte

Zte ZXR10 3800-8 Instrucciones de instalación

Zte

Zte ZXR10 M6000 Series Manual de usuario

Zte

Zte MF286D Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad