Zte MF633PLUS Manual de usuario

Tabla de contenidos

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario

Zoom

Zoom 1070 Series Manual de usuario

Aztech

Aztech HW831 Manual de usuario

Check your system requirements

1. Check you have a spare USB port (USB 1.0 or 2.0)

2. You need to be running Windows 2000 / XP / Vista for a

PC or OS X 10.5 and above for a Mac

3. The recommended system requirements are:

CPU 1GHz Pentium or above

Hard Disk 20GBorabove

RAM 512Morabove

Display 800 x 600 minimum

4. You need to have Administrator rights to install and run

the software

5. We suggest you switch off your anti-virus software before

installing the USB modem. In some cases protection

software can prevent automatic installation. It is possible

to start the installation process manually by clicking the

Autorun icon when it appears.

1

Get to know your USB Modem

1 35

4 6

2

1. LED Indicator 2. Rotating USB plug

3. ExternalAntenna Port 4. Back cover

5. SIM Slot 6. MicroSD Slot

2

Insert your SIM Card

1. Open the slider panel on the back of your USB modem.

2. Insert your USIM card carefully as shown.

3. If you want to add a memory card you can do it now.Your

USB modem supports up to 4GB MicroSDHC memory.

4. Close the back cover.

Tip

Remember to keep your plastic SIM card holder. It has a

record of your phone number and a PIN number which you

will need later.

3

Insert the modem into your computer

The installation and management software is pre-loaded onto

your USB modem. Simply insert your modem into your

computer and follow the instructions on-screen. You’ll be up

and connected in about 5 minutes.

The USB modem is a Plug and Play device. Once inserted

your system will automatically detect the new hardware and

start to install the software. Be patient as it may take some

time for your computer to recognise the modem.

If nothing happens your system configuration may be

preventingAutorun.

Tips toresolve

zWindows users: Double click the Autorun icon to start the

software installation

zMAC users: Open theCD-ROM,ZTEMODEM, anddouble

click Telstra Turbo Connection Manager icon.

4

The installation method shown below is for Windows XP.

Othersystemswillfollowasimilarbutnotnecessarilyidentical

installation process:

5

Choose ‘I accept….’, and then click Next to continue.

6

Press Next to accept the default folder location, or press

Change to define your own path.

7

Please wait a few seconds for the installation to proceed…

Click Finish to complete the installation.

8

Connect to the internet

After installation the software interface will launch

automatically. Your modemwill continueinstalling for acouple

of minutes.

You’ll be ready to go as soon as you see the Connect button.

9

LEDindicator Modem Status

Red Offline.Not registered on the network

Green solid Registered on the 2G network

Green blinking Active data transfer on the 2G network

Blue solid Registered on the 3G network

Blue blinking Active data transfer on the 3G network

zThe installation will create a new shortcut on your desktop

and a new program listing under Start-Programs

zYou may have to reboot your PC or MAC after installation

is complete

zIf you have problems with the installation please contact

yoursupplierorseeourwebsite,www.zte.com.au/formore

assistance and FAQ’s

zIf you can’t connect to the internet check your SIM card is

insertedcorrectly,contactyourserviceproviderandcheck

your account is active.

10